Question about 2006 AMC J10

1 Answer

What oils my78 amc 360 timing chain set - 2006 AMC J10

Posted by Anonymous on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • AMC Master
  • 1,268 Answers

Oil splash fro the bottom and oil will drain back over the chain when returning to pan from under intake.

Posted on Nov 06, 2014


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 25 Answers

SOURCE: replacing the oil pump in a amc 360

are u going to pull the motor or leave it in the vehical..????? AMC ower

Posted on Feb 09, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Jeep Cherokee timing belt or chain?

No year , no country, now that is a challenge.
Gas or Diesel?
my guess is you dont know what engine you have or year car?
is this the 4.0 inline SIX, (5million made USA)
it has gear drive cam. (4.0L)

lets see, 1984 AMC to 2001. called the XJ ,is car XJ??????

here is the lineup for XJ. (pick one?)

in some countries the, 2002 + cars
The Liberty (is called Cherokee) (nice huh?)
so no country stated, so cant tell what Cherokee means.
not me, ever.

Mar 17, 2015 | Jeep Cars & Trucks

1 Answer

How can I install an AMC 360 engine into my 1965 rambler classic with a 287 engine?

what I did was removed the 287 engine installed an AMC 360 .In order to do this you have to get an borg warner m11 bell housing from 67 to 71 .amc used borg warner transmissions until than. So you put the m11 bell housing on to the m8 transmission and get the motor mount for the AMC 360 engine

Feb 10, 2015 | AMC Cars & Trucks

1 Answer

I would like to know if I can install an borg warner m8 tail section onto an borg warner m12 transmission that way I would not have to change from the torque tube subsention

I just found out that all that you have to do is . You have three options to go with one change the bellhousing from a borg warner m12 transmission. two use and borg warner m12 transmission but use the yoke head from the m8 onto the yoke of the m12 yoke .Three use a chryler/amc tf727 torque command transmission.Use the yoke from the m8 weld the head on to the spline of the 727transmission weld the m8 tail section onto eather transmission and that way you can keep the torque tube suspension on your classic 770 with the 287.Your rear end should be an AMC 20 to stand the torque from the AMC 360 engine with about 350 hp .last but at lease get the trany mounts.

Feb 10, 2015 | AMC Cars & Trucks

1 Answer

Fuel line routing diagram

Back in those days there was no return line. Just had to have a vented gas cap.

Oct 04, 2013 | AMC Cars & Trucks

2 Answers

Jeep 360 rattle sound at idle in park

it could be a wrist pin, and im not sure if those amc's had hydraulic lifters but sometimes with old lifters when the oil pressure is lower at an idle the lifters arnt filling up all the way so they develope a little valve lash, and when the rpms are raised the oil pressure raises and fills the lifters. you could try chasing the noise down with an automotive stethoscope.

Mar 23, 2012 | 1985 Jeep Grand Wagoneer

1 Answer

Rebuit 360 javelin motor. putting cam in and timing chain in.can we set up on #1 cyl. to put timing cain in and cam. the motor has flat top pistons. read some other sites that said ti use the #4 on the...

yes you can do it on NO1 and you have the cams right by the look of it ,both valves closed with inlet just closed and exhaust getting ready to open ,use a protractor if you have to to get the degrees before TDC and so on right

Jul 18, 2011 | AMC Concord Cars & Trucks

1 Answer

Changed Cap,rotor,plugs and wiring. Car running bad. May have crossed some wires on distributor. Need schematic to correct

look on the intake manifold its usually stamped there, or go to the library and look in a Chilton"s auto manual it'll be in there,is your timing chain still ok??? it hasn't jumped,which would mess up timing...some chains were a hard nylon gear in those years and can wear out and the chain can jump and throw timing off too

Sep 13, 2009 | 1984 AMC American Motors Eagle

2 Answers

Have a 1979 cj7 cant find a flywheel with right bolt pattern the motor is a amc 360 but a flywheel from a 360 has a differnt bolt pattern than mine any help please

are you sure you have an amc 360 and not a 304 and also are you sure the flywheel came from an amc 360 and not a chevy 350? A 350 will bolt directly in place of the 360. You might also try a 350 flywheel.

May 10, 2009 | Jeep CJ7 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top AMC Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers


Level 3 Expert

76630 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Are you an AMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides