Question about 2002 Ford ZX2

1 Answer

Ford z x 2 serpintine belt keeps coming off

What do you think the problem is?

Posted by on

  • jrk05a May 11, 2010

    Check to make sure that your tensioner pulley has adequate and consistent pressure to put on the belt. When was the last time you replaced your belt?... Check all around the belt for any odd wearing or disfigurement. 

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,533 Answers

If you are talking about the drive belt keeps coming off you may need a new belt tensioner try this website to see if they have your car listed its www.autozone.com if they do you be able to get pictures and diagrams showing you how to replace it and check on a price at the same time Michigan Man.

Posted on May 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Serpintine belt wont tight ,idler pully is in good shape old belt came off thought it had streached it was almost new replaced it still having same problem.


Are you sure the belt tensioner spring is strong enough to keep the belt tight ?
You should have to move the tensioner to put the belt on, then it should keep the belt tight when you finish.

Apr 19, 2013 | 1996 Ford Taurus

1 Answer

Serpintine belt keeps coming off i replace the tensioner pulley


Generally speaking, the belt is either too loose or one of the pulleys is not straight with the others.

Feb 13, 2013 | 2000 Ford Taurus

1 Answer

My serpintine belt keep coming off i replaced pulley and tensione


Typically a belt will come off if all the pulleys are not perfectly aligned.
If you recently replaced a power steering pump and the pulley was not properly seated all the way down where the pulley front is flush with the metal shaft from the pump then you will shred the belts and they will come off. If you ONLY swapped the tensioner and idler pulley you may have installed the tensioner so it isn't parallel to the other pulleys but that would be very rare because it would have been difficult to get the belt on if it was not properly installed. There also could be a damaged plastic pulley that could be "cutting" into the belt which would also cause the belt to slip off.

Jul 24, 2010 | 1992 Buick Park Avenue

1 Answer

Serpintine belt replacement


You shouldn't have to remove those items, I believe you would lift up on it. You canuse a 3/8 or 1/2 inch drive racket, that will fit in the square hole in the tensioner. They also make a tool that you can use, but a bit pricey, around $40.

Mar 15, 2010 | 1998 Ford F150 Regular Cab

2 Answers

Ford focus serpintine belt squeal


Yes a new belt the old one has gotten briitle and stiff from all the heating and cooling cycles.
Good luck dont forget to rate.

Jan 05, 2010 | 2000 Ford Focus

1 Answer

Need the diagram for a serpintine belt on a 2000


There are 2 possible engines for your Windstar, the 3.0L and the 3.8L. Below are both diagrams. Best of luck on your repair!
Greg

3.0L
6ace2c8.jpg





3.8L
186c6d0.jpg

Nov 11, 2009 | 2000 Ford Windstar

1 Answer

Need diagram for 1999 Ford Taurus serpintine belt


it sould be located under the hood on the radiator shroud area

Oct 03, 2009 | 1999 Ford Taurus

2 Answers

Diagram for a 1999 ford escort z2 serpintine belt


bring belt tensioner to where all the way moved
make sure you have belt set once you get the tensioner moves over the belt slides the rest way on and tensioner goes against belt
make sure belt is lined up properly

Jul 07, 2008 | 1999 Ford Escort

1 Answer

Serpintine belt


It sounds to me like the belt tensioner pulley is bad.Its spring loaded and this pulley is what keeps the belt in place.

Jun 04, 2008 | 1998 Chrysler Town & Country

Not finding what you are looking for?
2002 Ford ZX2 Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...