Question about Rover 75

Open Question

Reverse lights not working rover 75

Reverse lights not working. Have tried replacing bulbs.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 184 Answers

SOURCE: mazda 6 reverse lights

ITS POSSIBLE THAT YOUR REVERSE LIGHT SWITCH IS FAULTY BEST WAY TO FIND OUT IS TO DISCONNECT REVERSE SWITCH AT G/BOX & BRIDGE OUT CONNECTIONS WITH IGN ON & IN REVERSE LIGHTS SHOULD GO ON IF THEY DO THEN ITS YOUR SWITCH.

Posted on Dec 20, 2008

  • 78 Answers

SOURCE: reverse lights don't work

Theres a switch on the bottom of the steering colium. put the car in reverse (with the engine off) losen it and move it untill the lights come on then tighten it. check it because its also your netule safety. (ON SOME MODELS ITS ONTHE TRANSMISSION)

Posted on Dec 27, 2008

  • 718 Answers

SOURCE: tail lights and reverse lights out.

Check the bulbs for the tail/brake lights. If you put in single filament bulbs it will be on from the tail light voltage and the brakes will not show.
Try this;
Turn off the lights, press the brake pedal. Look at the brightness of the brake lights.
Now turn on the lights. Look at the brightness of the lights. If is the same as before the bulbs are wrong. You need two filament bulb.

Posted on May 15, 2009

  • 1986 Answers

SOURCE: reverse lights don't work, not the bulbs, put the

The switch is located on the side of the transmission. There is a 2-wire connection, (I believe they are coloured black/orange and red/white. If you unplug the connector and jump the 2 wires together the lights should go on. If they do then the switch is dead, if not there's something else wrong.

Posted on Aug 24, 2009

  • 1986 Answers

SOURCE: reverse lights wont work

On the side of your transmission will be a switch with several wires coming out of it. This is your reverse switch that turns on your reverse lights and most likely needs to be replaced

Posted on Oct 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my name is Dean, I have a range rover sport, I recently bought & fitted LED tail lights, the lights work fine until I put the vehicle into reverse then all the tail lights go out exept reverse?


I suggest you suspect faulty grounding or earthing of one or more of the bulbs or lamps.

I suggest you pay particular attention to any wiring you disconnected or disturbed in the process of fitting the led lights. Multiway connector terminals are often electroplated steel prone to attack by dirt, water or damp air and such things often cause trouble after being disturbed.

Mar 28, 2016 | Rover Cars & Trucks

1 Answer

Reverse light not working what to do


If bulbs are good then you need to check the switch that powers them when you put the car into reverse.

FYI - Neutral safety switch prevents car from starting unless it is in neutral transmission position only.

Oct 05, 2015 | Cars & Trucks

2 Answers

I have a 2004 rover 25 1.4, this morning tail lights and number plate light not working, reverse, fog and brake lights all fine, advise pleas?


Brake light? Some bad connections to light sockets if bulbs not burned out. Of course you will need help to see brake light when brake is pushed.

Mar 08, 2015 | 2004 Rover 25 1.4

1 Answer

1998 landrover discovery blows fuse #14 when shifted to reverse


You can check the reverse light bulbs and see if they are bad/corroded, also check ground wire.

Mar 11, 2014 | 1998 Land Rover Discovery

1 Answer

How to replace brake light bulb on 1998 Land Rover Discovey? LE


1. Pull out side facing seat or pocket cover.
2. Unscrew fastener and remove access panel.
3. Turn bulb holder anti-clockwise to release.
4. Remove bulb.
Refitting is reverse of the above procedure

Nov 09, 2013 | 1998 Land Rover Discovery

1 Answer

No Brakelights


there's a brake light switch o the arm the brake pedal is connected too,it has two wires going to it. hook two wires together if brake lights go on replace switch if not check for power to switch

Jul 07, 2012 | 1996 Land Rover Discovery

1 Answer

My reverse lights do not working have checked bulbs and fuses


check one of two things check to see if there is a solid earth on the bulbs with no resistance and that the gear select wires are activation corectly (ie park should turn your brake lights on (sometimes only your handbrake turns them on )
if all this is fine and you are still stumped you coould fillow the bulb wires back to the realay and test the wire if its in good working condition i would recoment rewiring a relay to activate when you select reverse and supplu 12V+ to the bulbs

May 18, 2012 | Land Rover Freelander Cars & Trucks

1 Answer

I have replaced reverse light bulb, however new bulb will not work. I have checked the bulb, the fuses and the wiring, any ideas why can't get it work. Also indicator on dash still present.


The reverse light switch is a mechanical device used to control operation of the vehicle reverse lights. The switch is designed to complete the circuit when reverse gear is selected allowing reverse light operation (manual transmission only).

Aug 04, 2011 | Audi A3 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rover Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14184 Answers

Rob
Rob

Level 2 Expert

62 Answers

Are you a Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...