Question about 2011 Honda Pilot Touring

Open Question

Honda Pilot Emission Code VTM-4

Check Emission System code lite came on & shows code VTM-4

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

IrishDruid
  • 2712 Answers

SOURCE: radio code for 2003 honda pilot, and reset for maintanence light

There is a little fuse box to the left of the steering wheel with a cover over it. When you take off the cover on the under side of the cover there is a big number (like big font size) printed on a piece of paper. It like 5 or 6 digits long and obviosly numbers that can go into your stereo, like 1-6. If you type it in and it works it will make a beeping sound.

If that doesnt help, call your local Honda dealership and get the code from them. You can also obtain a user manual. All the needed info can be found on this page:
http://automobiles.honda.com/information/owner-resources.aspx

Posted on Jul 01, 2008

  • 78 Answers

SOURCE: engine lite on

po740 is possible bad torque converter or sometimes the o-ring around the torque convertor is not sealing around the torque this is what honda says about the code

Posted on Nov 22, 2008

ronaldo_ross
  • 1056 Answers

SOURCE: Looking to replace honda pilot knock sensor

These knock sensors are hard to get into. If thats a V6 it is underneath the intake manifold. make sure you cover the intake port when you take it apart, so a screw or a bolt don't accidentally drops in there.

Posted on Jun 28, 2009

johnjohn2
  • 5763 Answers

SOURCE: radio error Honda Pilot code

the code should be with your owners manualy its on a card the size of a business card.there will be # s on it, make sure you follow directions in manualy on how to enter code,also you might be able to call dealer, give them your cars vin # and they sometimes will give u a code.good luck.

Posted on Oct 02, 2009

  • 5 Answers

SOURCE: 2002 Honda Accord V6 check engine light on- local

po505 idle air control if this is the code all hondas do it eventully, small problem easy fix u have 2 choices either remove the idle air control motor and clean the inside of it u will find it's black and the spring inside is stuck clean it with carb cleaner or gum cutter any parts store will have this it's a dirty job it will work for awhile but to replace it is recommended its not expensive for a new one which u can get at any autoparts store autozone,advanced,napa etc. there is only 2 bolts in most cases maybe 3 i doubt it though if u go online t google and type in th eyear make and model and engine size in ur case it's a 3.0 v6 and look for idle air control locations u'll find it to do this job a shop will charge u anywhere from 100.00 for diag to retrive the code plus the part and the labor so about 250.00-375.00 it will only take u honestly maybe 15 minutes to perform only tools needed are a 10 millimeter wrench there is only 1 connector to disconnect and ur done if u do this u will still have the check engine light because u have not cleared it from the computer to do this just disconnect the negative battery terminal (the black one or has a neg sign - don't disconnect the positive side +)for 5 minutes then reconnect and the computer will have reset no more light. good luck it really is that easy

Posted on Oct 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2007 Honda pilot is idling rough and the vtm-4 light came on and engine light came on....what is this and how much will it cost? Thanks


You'll need to take it somewhere (auto parts store) to get the codes checked to proceed. The code will tell you or a mechanic what to check not what to replace.

Feb 27, 2016 | Honda Cars & Trucks

1 Answer

Indicator light had message VTM-4 I restarted, VTM-4 message disappeared but indicator light still on. What does this indicate?


the computer will store any codes until cleared. you can clear the computer memory by disconnecting battery for 1 min. but the code may reset if there is a true problem and not just a momentary anomaly.

Mar 29, 2015 | 2008 Honda Pilot

1 Answer

What is the cause of the P0325 error code in a 2008 honda pilot? is the code related to the O2 sensor?


That is a knock sensor code. It is in the valley below the intake. Rodents like to eat the wires to it, look for that. The sensor can fail, too.

Aug 18, 2014 | 2008 Honda Pilot

1 Answer

My check engine light and vtm light are on in my 2008 Honda Pilot I checked the codes it's saying the egr valve is bad would that cause the Vtm light to come on to


Yes, the VTM-4 module will light up.

Here's the deal; when you manually turn on the Variable Torque Management-4 system, the light to the console switch is illuminated- letting you know that the vehicle is in traction control mode- and it is functioning properly.

However, if you did not manually activate the VTM, and your cruising along under normal driving conditions, but you start experiencing engine problems, like when the Exhaust Gas Recirculation valve starts to malfunction, this malfunction will cause the engine to misfire and lose engine power.

When this loss of engine power occurs, the VTM perceives that the engine power is being reduced to restore traction to the car's drive line (axle and wheels)- so it triggers the light to go on.

The triggering of the VTM could also happen when the idle speed control valve malfunctions.

So once you have the EGR valve replaced, the codes on the OBD module should be cleared; the check engine light will turn off; and the VTM system light will turn off too.

Jul 04, 2014 | Cars & Trucks

1 Answer

What electrical functions on my vehical does the VTM electronic control unit


VTM , a great question.
04 pilot.
did you lose the glove box oper guide?
or how about the FSM or wiki. (see design here, )
http://en.wikipedia.org/wiki/Honda_Pilot

its not AWD
not at all.

i think it uses the ABS speed sensor to detect slip
and then help you drive when stuck.
2nd google hit, and BAM
http://www.hagerstownhonda.com/news/variable-torque-management-system-vtm-4

a nice video./



Jul 14, 2013 | 2004 Honda Pilot

1 Answer

09 Ridgeline showing VTM-4 and Check engine light


Hi, An '09 should be under warranty or I'd least take it in and 'nicely' ask that it be covered under warranty.

This LINK may help w/the VTM-4 info...but not sure about the EGR.

GL,
Td

Oct 01, 2012 | Ford Cars & Trucks

2 Answers

The check engine lights and vtm-4 lights of my 2003 honda pilot alway stays on after i went for an automatic car wash. and after a day or two mostly if i ran it on the higheay check engine and vtm-4 light...


Apparently what has most likely happened is you were on a wet or ice road and may have lost traction on the road. You may have never even noticed, but your vehicle did. The vehicle compensated for the road condition & probably revved the engine a little to low, which probably turned on the check engine light. This is a scenario only.

The best way to find out what's wrong is to have the computer scanned for trouble codes. The trouble code will point to the problem. Several auto parts stores will do this for free or rent you a scanner so you can scan it yourself. If the code isn't obvious or you need more help you can come back here and I'll walk you through figuring it out.

It also could be you need to change the rear differential fluid. There was a TSB for this vehicle. I am not sure if your vehicle falls into it. You could check with the dealer as well.

Hope this helps; also keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using Fixya, and have a nice day

Dec 19, 2011 | 2003 Honda Pilot

1 Answer

I have a honda acura mdx 2001 the check engine light is on and the vtm-4 light also . what can be the problem?


You will only know the system with the malfunction,
when you retrieve any codes

Then diagnose the issue, using the codes and
a trouble chart

Feb 16, 2011 | 2001 Acura MDX

1 Answer

WHAT IS VTM-4 LIGHT?


VTM-4 LIGHT is the 4x4 option you can use when your in the auto shift gears 1 and 2. When you put the shifter in 1 or 2 gear, you can push the VTM-4 button on dash and you will engage the 4 wheel drive constently. If you switch out of 1st or 2nd gear it will disengage automatically. The VTM-4 also works in reverse gear. Hope this helps.

Dec 27, 2010 | 2002 Acura MDX

1 Answer

How do i use the 4wd


Hi,

Bring your vehicle to a full and complete stop. The system will not properly engage if the vehicle is moving.

Shift the vehicle into first gear, second gear, or reverse before engaging the 4-wheel-drive system. The system is limited based on the speed of the vehicle, and these gears are within the speed range of the system's capabilities.

For Honda piliot, engage the VTM-4 system by pressing the VTM-4 Lock button on your Pilot's dashboard. The button will illuminate to confirm that the system is engaged.

I hope this helps.


Nov 30, 2010 | Mazda MAZDA6 Cars & Trucks

Not finding what you are looking for?
2011 Honda Pilot Touring Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...