Question about 1998 BMW Z3 Roadster

2 Answers

Replacing BMW decals on the side of the 1998 BMW Z3 roadster

Another question: We bought new BMW decals for the sides of the roadster - however, they are stuck with adhesive. We tried (carefully) to pull the old ones off, but didn't want to damage the car. Any ideas?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 187 Answers

There is a spray product that I used a long time ago to remove the vinyl letters off a boat. It worked great just can't remember the name. Check with an auto paint supplyer.

Posted on May 08, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

TRY USING A HAIR DRYER TO HEAT THE "STICKERS' THIS SHOULD LOOSEN ,OR SOFTEN THE GLUE SO YOU CAN SAFELY REMOVE THE DECAL. CAREFULLY REMOVE THE GLUE WITH A LITTLE RUBBING ALCOHOL . THEN WASH AREA AN DRY. THEN APPLY YOU NEW ONES ACCORDING TO THEIR INSTRUCTIONS.

Posted on Apr 21, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1998 bmw z3 roadster 2.8 engine light came DTC code p0170


There is no one fix works on this O2 sensor code
P0170 - Fuel Trim Malfunction Bank 1
Possible causes- Intake air leaks
- Faulty front heated oxygen sensor
- Ignition misfiring
- Faulty fuel injectors
- Exhaust gas leaks
- Incorrect fuel pressure
- Lack of fuel
- Faulty Mass Air Flow (MAF) sensor
- Incorrect Positive Crankcase Ventilation (PCV) hose connection

Jun 05, 2012 | 1998 BMW Z3 Roadster

1 Answer

Where is the fuse box in a BMW z3 1998


black plastic fuse box in the engine compartment on the left side of the car close to the firewall. The fuse is 30 Amp; it is fuse number 32 (the location diagram is on the inside of the lid on the fuse box).

Jan 20, 2012 | 1998 BMW Z3 Roadster

1 Answer

WHERETO FIND THE COMPUTER BOX OF Z3 1998 MODEL


Driver's side, under the hood, next to the firewall. It is where most vehicles put their brake booster and power steering fluid. Big black box. You will see the fuses inside.

Sep 30, 2009 | 1997 BMW Z3 Roadster

2 Answers

I have a 2000 BMW Z3 roadster. The switch for the


There are a couple of relay switches in the side of the top on the driver's side. One of these is not working. Your break lights are out because of this too. You have to apply the brake to lower or raise the top.

Aug 11, 2009 | 1998 BMW Z3 Roadster

1 Answer

Check Engine light on 1998 BMW Z3 roadster


yes the light is because of the gas cap being gone (sets code in evaporative emissions system), replace the gas cap, disconnect the battery for five minutes and that will turn of/reset the light, make sure u have the radio code before u do this, if u don't u will have no radio after the battery is disconnected..

May 08, 2009 | 1998 BMW Z3 Roadster

1 Answer

98 BMW Z3 water leak in truck


ck your tail light seals also

Dec 18, 2008 | 1998 BMW Z3 Roadster

1 Answer

Bmw z3 roadster 1.9


it seem like you are having problems with the ignition switch,replace it and it should be fine.goodluck"!!!

Aug 02, 2008 | 1998 BMW Z3 Roadster

1 Answer

1998 Z3M convertible top


You must ensure that you have your foot on the brake and both windows are half down

Jul 26, 2008 | 1998 BMW Z3 Roadster

1 Answer

BMW Z3 SPORTS CAR 1998


its the dreaded seat rock syndrome, plenty of fixes on the forums, basically you have to replace spacers in set drive mechanism. I did with the help of a friend after ordring bushes and it was quite easy.

Jun 03, 2008 | 1998 BMW Z3 Roadster

Not finding what you are looking for?
1998 BMW Z3 Roadster Logo

Related Topics:

388 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...