Question about Mazda Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Brakes Mazda Famillia 1989
Id be inclined to adjust the rear brake shoes How high do you have to lift the hand brake lever?Some service centres/mechanics adjust the hand brake cable and not the shoes as they should because its easier and quicker Its a short cut !!
Posted on Oct 22, 2008
The rear breaks have self adjusters on them. If you put the car in reverse and pump the breaks this should adjust the breaks. These are drum breaks correct?
Posted on Dec 23, 2008
SOURCE: How do you adjust the
I noticed that if I force the ABS system to work by jamming on the brakes on snow or ice the ABS will pullsate. For some reason, the brake peddle came up. I don't know why.
Posted on Jan 06, 2009
on the rear calipers there is a 14m bolt on the back of the caliper beside the parking brake braket.
remove bolt on the inside there is a hex screw. as you turn it the piston gose in or out.
check calipers for damage.
Posted on May 13, 2009
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 30, 2009
Tips for a great answer:
Mar 09, 2016 | Mazda Cars & Trucks
Feb 25, 2016 | 2011 Mazda BT-50 L-Cab
Jul 12, 2015 | Mazda Cars & Trucks
Jul 08, 2015 | Cars & Trucks
Jun 22, 2014 | 2007 Mazda B Series
Oct 02, 2012 | 2011 Mazda BT-50 L-Cab
Feb 25, 2012 | 2005 Mazda B-Series
Jul 09, 2009 | 2007 Mazda B3000
228 people viewed this question
Usually answered in minutes!