Question about Lexus GS 350

Open Question

Airbag light wont go out

Replaced airbags along with all components and the airbag light is on. no codes coming up either.

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 323 Answers

SOURCE: driver's airbag light on 2007 PT Cruiser convertable

The first code is for "driver seat track position sensor low". The module detects that the sensor input is less than or equal to 0.3 mA. The second code is referring to the first code. I have no idea what the third code is. Basically you have two different communication systems mixed. The 2001 uses the PCI bus system and the 2007 uses the CAN bus which is much faster. The first code is a CAN bus code and the second is a PCI code. As far as the airbag deploying in the event of a collision, I don't believe it will with an active code in the system. I hope this helps.

Posted on May 13, 2009

co7196
  • 3433 Answers

SOURCE: '96 Saturn airbag light, do I need a reset or just drive cycles?

whomever changed the parts hasn't finished yet. Go back and tell them so. Or tell them the light is on so the parts they put in need warranty replacement. Good Luck

Posted on Jul 26, 2009

Atyourdoor
  • 93 Answers

SOURCE: BMW 745i airbag light. Told to replacing airbag clockspring

Hello , check the airbag contact sensor behing the grill assembley . They are located to the left and right of the grill almost to the headlight assemblies. Check the wires to them for corrosion and damage. Check the fuse as well. There should be an air bag testing wire or fuse in the fuse panel. DO NOT UNPLUG THE AIR BAG SENSORS OR HIT THEM !!

Posted on Aug 22, 2009

  • 4844 Answers

SOURCE: airbag dash light flashing code 51

Common fault on FORD

Usually due to a poor connection in the YELLOW PLASTIC CONNECTOR underneath the passenger seat.

Just push it together properly and it should clear the AirBag fault

Posted on Sep 06, 2009

  • 89 Answers

SOURCE: error code B1650 (short in knee airbag) comes out.

cheak out www.vehix411.com thay have free repair tips on airbags for most of the cars

Posted on Feb 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Airbag light stays on, how do I fix this myself with no cost or little cost?


If you haven't had the error code read from the cars SRS Airbag Computer Control Module, take the car to your friendly auto parts retailer and have the code read. Most parts suppliers will provide a complementary scan.

If the light comes on a second or two after the key is turned on it is an indication that the SRS computer has failed a system check.
The attached image shows components checked during the SRS diagnostics startup check. They check the wiring for bad connections and the airbag explosive charge to confirm the connections and charge is ready..

Having the error code data will give you an indication of the cost associated with the repair. With the light lit the saftey restraint is deactivated and the problem should be corrected. Many cars have tensioners that tighten the seat belt during a crash. Connections to these components along with the seat presence switches can have connection problems under and around the seats.

SRS remains charged even when the power to the SRS computer is removed. This makes sense when you think about a crash where the electrical systems fails at the instant the system needs to deploy the airbag!!

These systems need to be serviced only by a qualified technician. The Airbags can deploy without warning as when you are working on the system and not follow the required procedures.
26293128-0qxje32y43lpznpytpdsjckc-4-0.jpg Hope this helps?

Sep 27, 2016 | Cars & Trucks

1 Answer

What could be the reason that yhe sabs airbag light illuminating?


Retrieve your OBD Fault Codes,look them up
& use them, along with factory trouble charts, to
find a problem, through component testing

The air bag is on the SRS System & will be turned OFF

The ABS is the Braking System

Wouldn't use it
Get it fixed

Nov 18, 2014 | 2005 Toyota RunX 160i

1 Answer

1999 Plymouth Grand Voyager airbag light keeps coming on and when put on computer scaner the code came up "Driver quid open" what does this mean?


I am not sure whether the computer scanner you used was for the correct make and model Voyager. Woulod be helpful if you provide some details on what scanner you are using and where did you connect it.

The airbag light coming on has a few reasons.

One is that the airbag computer is failing certain tests and is giving a warning.
The other possibility is that the clockspring inside the steering column is faulty. some model were recalled in early 2000 for clockspring replacement under the component life time warranty.

Next time the light comes on you try to press the horn and check if it works. If not it is definitely clockspring. Otherwise the airbag circuit is faulty. In either case a visit to a service dealer is required.

Sep 15, 2011 | 1999 Plymouth Grand Voyager

1 Answer

Airbag light came on..did this come from a impact


{: ) It is possible, but not always the case. An airbag light on your instrument cluster may mean several things. Usually under normal conditions, an airbag light on warns the driver that the airbag system has detected a fault somewhere in the airbag circuits and need to be checked or fixed, otherwise the airbag protection system may not work properly in the event of collision. It can be wiring or component malfunctions.
Sometimes it can be a deployed component like the seat belt retractors or an SDM, which you may not notice. Your vehicle needs to be checked by a diagnostic scan tool for trouble codes. This way, you can easily determine the status of your airbag system.
If your vehicle did have an impact before that you're not aware of, and no attempts were made to have it repaired despite previous airbag light warnings, well, you can always expect the airbag light to come on.

Jun 26, 2011 | 2005 GMC Yukon

1 Answer

My srs airbag warning light doesn't go out on my 05 honda pilot. How do I shut it off


There are 4 most important components involved in the airbag deploy system.
Airbag itself.
Airbag Clock Spring.
Airbag Control Unit (ACU) or Airbag Module.
Airbag Impact Sensors.
If it is any problem in the components, then Airbag Light stays ON.
Sometimes there is a false code, and AUC can be cleared and reset. This can be done by professionals and cost $60 to $70. Might be a loose connector or a defective component, in this case they might charge you more.
The light indicates a problem with your air bags. Do not attempt to do any repairs to the system by yourself. Take it to the Honda dealer or a qualified service center.

Nov 06, 2010 | 2005 Honda Pilot

1 Answer

2002 airbag light won't go off.


There are three most important components involved in the air bag deploy system.
Airbag itself.
Airbag Control Unit (ACU) or Airbag Module.
Airbag Impact Sensors.
If it is any problem in the components then Airbag Light stay ON.
Sometimes there is a false code and AUC can be cleared and reset. This can be done by professionals and cost $60 to $70. Might be a loose connector or a defective component, in this case they might charge you more.

Nov 06, 2010 | 2002 Mini Cooper

1 Answer

The Airbag light comes on for no apparent reason and at different intervals


when this light comes on it is a warning that the airbag diagnsotic montior has sensed a problem in the airbag systems electrical components, the source of the problem is stored as a fault code and can be retrieved with a factory scan tools. Whenever this light is on the airbag system is disabled

Jun 15, 2010 | 2007 Chrysler PT Cruiser Touring Hatchback

1 Answer

'96 Saturn airbag light, do I need a reset or just drive cycles?


whomever changed the parts hasn't finished yet. Go back and tell them so. Or tell them the light is on so the parts they put in need warranty replacement. Good Luck

Jul 25, 2009 | 1998 Saturn SL

1 Answer

Air bag light stays on


If your airbag light comes on it means its not working. Some of the newer airbag systems have weight sensors under the seats and anything lodged under them can disable the passenger airbag and possibly cause the light to go on. If there are no other symptoms, and nothing impeding the airbags then the car thinks the airbag wont work. If you are concerned for your son's safety, take it to a qualified mechanic and have them check/replace your airbag. Good Luck!

Feb 27, 2009 | 2001 Hyundai Elantra

1 Answer

Bmw 323 airbag light


Hello Mike.

This means there is a faulty component. To reset the light in the first instance is a god idea but if it come on again then you need to have the code read to see which component needs to be replaced. In most cases its the seat belt tensioner that needs replacing due to wear and tear.

Jan 09, 2009 | 1999 BMW 323 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

881 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...