Question about 1996 Nissan Sentra

2 Answers

WILL NOT START NO SPARK FROM DISTRIBUTOR I HAVE PUT THE DISTRIBUTOR TO OTHER CAR IT STARTED I HAVE NEW CRANKSHAFT SENSOR TO

Posted by on

  • 1 more comment 
  • bengeerman May 09, 2009

    THE ENGINE ROTATE BUT THE INJECTORS ISNT KLIKING AND THERE IS NO SPARK ON SPARKPLUGS WHEN TRY TO START IT GIVE ME OBD2 CODE 180

  • bengeerman May 09, 2009

    I HAVE PUT THE DISTRIBUTOR TO ANOTHER CAR IT STARTED EVERYTHING IS INSIDE THE DISTRIBUTOR

  • yadayada
    yadayada May 11, 2010

    what OBD 2 trouble codes do u have? what is the symptom? no spark, no fuel pressure, what?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check your ecm, looking for scorching and corrosion. Replace with rebuilt, costs about $180 with your core.

Posted on Jun 13, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 82 Answers

Check the coil,,or the coil lead to the distributor ,,,could be faulty,,,

Posted on May 08, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CAR BEEN WASHED CRANK OVER DOES NOT START NO SPARK ON COIL FIT NEW COIL AND MODULE UNIT STIL NO SPARK


A bad crankshaft position (CKP) sensor (on engines that do not have a distributor), or broken, loose or corroded wires from the sensor to the PCM.
A bad ignition coil (on engines that have a distributor and a single coil)

Feb 18, 2016 | Cars & Trucks

2 Answers

My 1995 dodge caravan trys to start but wont im getting no spark to my spark plugs


Hi mate start at the easiest point which will be to check your EARTH to make sure everything is earthed.

Feb 06, 2015 | Dodge Cars & Trucks

1 Answer

Having trouble starting my 1995 Jeep Grand Cherokee. Changed out distributor cap, rotor, module and spark ignitor coil and no luck. Checked for spark by taking loose a spark plug wire and using a sc


is the check engine light on. it sounds like a bad sensor crankshaft positioning sensor or camshaft positioning sensor will cause it not to start.

Aug 16, 2014 | Jeep Grand Cherokee Cars & Trucks

3 Answers

2001 dodge stratus 3.0l automatic cranks but wont start not even with start fluid


check the fuel pressure and make sure you got the correct pressure

Jan 25, 2014 | 2001 Dodge Stratus

1 Answer

No spark 1987 gmc 305 v8


Could be ignition control module. It is probably located on distributor. It is a black odd shaped object with like 2 or 3 plugs on it. Take it to an autozone and have it checked

Mar 18, 2013 | GMC Sierra 1500 Cars & Trucks

1 Answer

Car wouldn't start .told crankshaft sensor faulty / replaced but still not start & smells as if flood cab


Before you go for anything, try the following: 1) check if there is any spark goes from distributor or coil to leads .
2) check if your car fitted with injection system,if the injectors are spraying correct or are not. If not means that too much fuel in the combustion chamber and kill the spark.
3)remove the spark plugs - after you start for couple of times - if are dry or wet. if are wet probably you have problem with the injector or spark lead,coil or distributor.
4) blocked catalytic converter.
5) ECU ( Electronic Control Unit.) faulty.

Jan 02, 2013 | Cars & Trucks

2 Answers

Why does'int my 1986 bmw 528e start?


Do you spark at the plugs? Most likely crankshaft sensor needs to be replaced. Welcome to computer controlled cars. : (

Mar 30, 2010 | BMW 528 Cars & Trucks

1 Answer

Cranks but won't start put in new


It may be the crankshaft sensor.Some cars use sensors that "watch" the crankshaft.When you turn over the car the sensor sees the crankshaft moving and tells the computer to send fuel,spark,etc. I am not real keen on your particular car but it sounds like this may be your problem.

Jan 29, 2010 | 1991 Plymouth Laser

3 Answers

Car spins over but does not start has no spark


Check for power to your distributor. You can retrieve wiring info from the local library.

If you have power to the distrubutor but no spark you may need a new ignition module or an entire distributor if they don't come seperately.

Jan 16, 2010 | 1996 Geo Prizm

Not finding what you are looking for?
1996 Nissan Sentra Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...