Question about 2005 Hyundai Getz 1.3

Open Question

Number plate bulb - 2005 Hyundai Getz 1.3

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Plate light does not work, but lights are good and sockets seem good


check bulb the number plate light runs on the same circuit as the side lights so if they are working its got to be a bad earth on the plate light

Jan 24, 2016 | Cars & Trucks

1 Answer

Which fuse is for the licenses plate light. I've changed the bulb but it still doesn't work


licence plate bulb is on the same circuit as the tail lights
if you have tail lights but no number plate light ,then problem is in the bulb holder or wiring

Nov 11, 2015 | 2001 GMC Yukon Denali

1 Answer

Number plate lights not working


have you the correct wattage bulb (s) fitted?
how do you know the bulb failure light is refering to number plate lights?

Jun 29, 2014 | 2005 Rover 75 1.8

1 Answer

Need to replace fuse for license plate bulbs for 2010 Ford Edge SEL....What fuse number is it?


normally the number plate light is on the same fuse as the park lights . I would be looking for a fault in the number plate area ( broken wire or blown bulb or bad/ no earth)

Dec 06, 2013 | Nissan Quest Cars & Trucks

1 Answer

Replace number plate bulb


I'm assuming you mean the rear license plate bulb?

Depends on if you have a coupe, sedan, or wagon.

Here's a link to the owner's manual. Start on page 247 and use the procedure that's right for you Focus type:

http://www.motorcraftservice.com/pubs/content/~WO1FOC/~MUS~LEN/41/01focog4e.pdf

Apr 29, 2009 | Ford Focus Cars & Trucks

1 Answer

How to cahnge number plate lights?


1). Open your Trunk and let it extend all the way up
2). Look up at the part of your trunk closest to the license plate.
3). There should be 2 wires, one going to the left light and one going to the right light. Follow the wire to the bulb, and twist counter-clockwise, or to the left to remove the bulb from the housing.
4). Replace the light bulb with the recommended factory bulb.
5). Repeat step 3 in the reverse order.

Apr 04, 2009 | 1997 Hyundai Accent

2 Answers

Need to fix lights on number plate on 1.3 3dr gl


hi from uk the number plate lights x2 are on same fuse as side+tail lights so if n/plate is not lit ?more likely bulbs have blown ? to access remove the panel from boot lid (clips+screws) then you will see rear of n/plate lights the bulb holders twist anti clock slightly and pull out replace bulbs with same type 5watt check all work b4 refitting panel

Feb 05, 2009 | 1999 Hyundai Accent

2 Answers

License plate bulb


how to replace the Dodge durango 2004 number plate light

Jan 20, 2009 | 1999 Dodge Durango

2 Answers

NUMBER PLATE LIGHTS NOT WORKING


take the bulb back out and clean inside the bulb holder, there may be some corrosion or other debris in there

Nov 03, 2008 | 1999 BMW 318 ti

Not finding what you are looking for?
2005 Hyundai Getz 1.3 Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...