Question about Cars & Trucks
While 4x4 engaged r/f cv shaft turns with clicking/grinding noise but wheel wont turn
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if you look there is probably only one axle shaft turning also that shaft should not turn unless the wheels are there is probably something wrong with that hub not a big problem to tear down and check you can also get replacement hubs that are manual locking.
Posted on Dec 30, 2008
SOURCE: 1996 gmc jimmy 4X4
I had a similar problem, only it would not engage. I had my mechanic look at it. He said that there is a pin that when a lever is moved the pin engages the 4x4. My pin sheared off. He replaced it and now it works great.
Posted on Feb 03, 2009
SOURCE: Ford F150 4x4 Passenger side hub
The gear on the 4 wheel drive actuator and possibly the hub is stripped.
Remove wheel and brakes and take the four 18mm bolts out of the back and remove the cap on the end of the hub and take off a 12 mm nut. It should then come apart so you can see whats going on.
Posted on Jan 05, 2010
4 wheel drive trucks make this sound alot im guessing its a manual shift so i would saw that the meshing is more of a grinding instead so i would have the transmission rebuilt to fix the problem or just see if the rings inside the trans. is missing the tooths on it :)
Posted on Mar 23, 2010
Tips for a great answer:
Jan 05, 2016 | Ford Cars & Trucks
Dec 09, 2015 | Cars & Trucks
Aug 28, 2013 | 2002 Chevrolet Cavalier
Dec 03, 2010 | 2004 Ford F150
Mar 23, 2010 | 1996 Ford F150 Regular Cab
Dec 27, 2009 | 1998 GMC Sierra
Dec 04, 2009 | 2000 Ford Excursion
Dec 30, 2008 | 2003 Ford F150 Regular Cab
Jul 16, 2018 | Cars & Trucks
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: