Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: car problems
Sounds to be a loose or corroded wire/s at either starter motor or at battery fusible links.
Also check the earth strap (Cable) between engine and bodywork.
Hope this helps, MMP
Posted on Aug 09, 2008
for the 220cdi,it is a 611.961 motor, you have to refill 6.5 liter,included the olilfilter.Whenyou have refill,and after the motor has running,you can check the oil-level in the board-computer.
Posted on Mar 28, 2009
Make sure the power steering belt is not loose. Also check the power steering fluid level.If these are ok the pump it self my be weak. But most times its the loose belt.
Posted on Aug 29, 2009
Testimonial: "Brilliant thanks for your help its much appreciated. I will check it out and post the outcome. thanks "
If you have electric folding mirrors fold them in, if not fold the mirror back against the spring (not easy as it is quite strong). Looking from the front, to the mirror cover side of the spindle on which the mirror pivots if you pull it forward, you will see the end of the main mirror body which has a groove it it. At the end of the groove there is a springclip which can prised up using a flat bladed screwdriver. It is easiest to place the blade under the clip and twist the clip to release it. Once fully released the cover can then be withdrawn. Refitting is the reverse of the above but if the cover does not automatically clip in place you may have to force it back with the screwdriver.
Posted on Nov 10, 2009
This can not be reset by conventional methods. This must be done through a scan tool. Usually only the dealer scan tool will communicate with the SRS module. If the SRS light is on you have other issues and they must be remedied before the light will go out. There is no way of knowing what the issue is without running codes with the scan tool.
Posted on Feb 10, 2010
Tips for a great answer:
Nov 21, 2014 | 2008 Mercedes-Benz Mercedes Benz C Class
Nov 18, 2013 | 1999 Mercedes-Benz C-Class
Oct 10, 2012 | Mercedes-Benz Cars & Trucks
Jul 27, 2012 | 2006 Mercedes-Benz C-Class
Oct 19, 2010 | 2002 Mercedes-Benz C-Class
Sep 23, 2010 | 2002 Mercedes-Benz C-Class
Jun 18, 2010 | 2002 Mercedes-Benz C-Class
Nov 18, 2017 | Dodge Cars & Trucks
Nov 17, 2017 | Lincoln Cars & Trucks
337 people viewed this question
Usually answered in minutes!