Question about 2010 Jeep Liberty

Open Question

2010 jeep liberty heater not working

Heater not working

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Brian032472
  • 150 Answers

SOURCE: 2003 Jeep Liberty heater fan problem

It is the blower motor resistor. Look under the passanger side dash and locate the fan housing (looks round and black in color. Then locate the resistor it will be in that housing usually withtwo ten millimeter nuts or two simple screws holding it in. unplug the harness to the resistor and remove the resistor. Part store price is approx. 50.00. Note: on aftermarket (not Jeep) resistor sometimes you have to modify the housing a little to get it in. Hope this helps.

Posted on Feb 01, 2009

SQUIRESXX
  • 486 Answers

SOURCE: 2002 jeep liberty heater only works when

CHECK THE HIGHT OF THE HEATER MATRIX IN THE CAB , IF ITS HIGHER THAN THE FILLER/EXPANSION TANK. THEN ITS AN AIR LOCK, or semi blocked heater matrix, LOOK FOR THE HIGHEST PIPE AND SEE IF THERE IS A BLEED VALVE, IF NOT TAKE BOTH PIPES OFF THE MATRIX FEEDS AND FLUSH OUT TO SEE IF IT IS BLOCKED, AND RECONNECT LOWEST PIPE FIRST AND FILL SYSTYM TILL WATER APPEAR FROM TOP AND RECONNECT RUN MOTOR, AND KEEP TOPIN UP put some rad flush in will also help

Posted on Dec 06, 2009

jlisagearhea
  • 412 Answers

SOURCE: heater only works on 3 and 4 setting

Your heater motor speed selector only working on a couple levels is caused by a faulting blower motor resistor.This part is located on the evaporator case next to the blower motor itself.Two bolts remove the resistor and an electrical pigtail finishes it off.The location of this is underneath the dash on the pass front side.Happy Holidays!!

Posted on Dec 10, 2009

mister_b_65
  • 74 Answers

SOURCE: heater on2002 Jeep liberty wont stay warm unless its moving



Check to see if the coolant level is low.






Posted on Dec 13, 2009

  • 2 Answers

SOURCE: Jeep Liberty 2002 heater does not work when engine

Check anti-freeze level and thermostat first.If not, there's some electronic/computer/sensor ********! I once replaced a heater core in a friends car only to find out she was low on anti-freeze the whole time but not enough to send an alarm or blinking light. You can have flucuations in heat when engine exurts pressure wi'll driving and while idling.

Posted on Feb 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 jeep liberty heater/blower and front only windshield washer both stopped. check fuses and all good . Is there a relay in fuse box that affects both and which one is it.


shoe falls off other foot and car drives perfectly?????????
why not ask or learn how it works first?
scan it yet, be super wise to scan all modern cars, first.
or chase tail,like a puppy you will.
VAST DTC ERRORS POSSIBLE OF HVAC !!!!
if all fuses test ok, then you answered you own question.
sure , is car in USA? be nice to say
is car , USA KK jeep? 08-2012
BATTERY NOT DISCHARGED, AT ALL,

we test fuses, ones look bad are.
ones look ok we test.
lacking the service manual.
wipers ok>?? one more shoe falls off foot.
are all things on car working except what you said?
blower fails on high, i work just that prob.

is HVAC, manual or the aTC AUTO SYSTEM
TOTALLY DIFFERENT SYSTEMS.
FUSE M34,HVAC
FUSE J21, WASHER.

Feb 01, 2017 | 2010 Jeep Liberty

1 Answer

Heater only blows hot air intermittently.


Jeep Liberty heater not blowing hot air Questions & Answers ...

www.fixya.com > ... > heater not blowing hot air > Cars & Trucks > Jeep
Jeep Liberty cars & trucks heater not blowing hot air questions and answers. Ask your Jeep heater ... My 2005 Jeep Liberty will not blow heat through ... properly.

jeep liberty 2002 heat problem/hvac box issue - YouTube

? 3:12
https://www.youtube.com/watch?v=xf22fvcN1hU
May 28, 2013 - Uploaded by Joffre richer-desroches
Joffre richer-desroches. ... How To Install Replace Engine Coolant Thermostat and Housing 3.7L 2002 ...

Nov 01, 2015 | 2005 Jeep Liberty Sport

1 Answer

Changed water pump and thermostat in 2010 jeep liberty still no heat


You didn't get all the air purged out of it. To new to be a clogged heater core. Unless some one has dumped a bunch of radiator stop leak in it.

Mar 28, 2015 | 2010 Jeep Liberty

1 Answer

Need cooling system diagram for 2010 jeep liberty 3.7 v6


It is electric.It is mounted in the center on top off the air plenum. You have to remove the dash to get to it. Last one I did was the heater core. 2003, had to remove the dash out of the vehicle, drop the steering column and remove the air plenum. All day job. You need a manual, lots of nuts, bolts, and screws to remove.

Dec 28, 2014 | 2010 Jeep Liberty

2 Answers

Why is my 2010 Jeep Liberty only blowing cold air?


Element in heater blown , could be independent fuse for heat also , check fusebox

Dec 01, 2014 | 2010 Jeep Liberty

1 Answer

Why does my 2010 Jeep Liberty just blows cold air?


Blend door is not moving to open to the heater core. Coud be that the cable is not connected to the dash lever but if it's vacuum actuated the vacuum line could be off. Check that your getting vacuum.

Dec 01, 2014 | 2010 Jeep Liberty

1 Answer

2010 jeep liberty heater blower not working


There are 3 reasons a heater blower will not run. I will list them in most common cause order.
1. No power to the motor.
Check the fuse (it is listed in your owners manual).
Check for power at the motor.
If the fuse is good and there's no power at the motor then it gets complicated and you should take it to someone with experience in fixing these.

2. Motor is bad
Remove the motor and apply power (12 volts) to it. If it is good it is going to spin fast, so better hold on tight. These things can hurt when they are loose and turned on.

3. Something is blocking the fan.
Remove the motor and look for the pencil (or whatever) may be stopping the fan from turning.

If what I've written doesn't make sense, then I would suggest either take it to someone who has experience or buy a repair manual (and other tools) and plan to spend some time reading and experimenting.

Jun 26, 2014 | 2010 Jeep Liberty

1 Answer

Heater vent control


Isn't this under warranty?

Feb 28, 2014 | Jeep Liberty Cars & Trucks

1 Answer

2010 jeep liberty uses 1 quart of oil every 1000 miles


i should be under factory warr and they should fix it for free

Apr 21, 2012 | 2010 Jeep Liberty

1 Answer

Air blend door jeep liberty 2010


My blend air door is stuck on my 2010 liberty. I have removed the actuator panel on the drivers side and the middle door that controls the air flow to the dash is completely seized. There are 4 blend air doors on this liberty, 2 control the heat/ac and 2 control the air flow.
there is no access to them from the drivers side and the passanger side looks like I have to cut into the air box to get to them.

Jan 03, 2012 | 2010 Jeep Liberty

Not finding what you are looking for?
2010 Jeep Liberty Logo

Related Topics:

82 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...