Question about Cars & Trucks

Open Question

My car has a keysense wire. (Hyundai Accent 2006) Do I need a bypass module or simply connect the GWR wire from my Prostart RS unit to this Keysense wire?

(Keysense is + polarity so I expect to use a relay to reverse a - output from unit)

Posted by on

  • Sebastien
    Sebastien Dec 09, 2013

    I have a no-chip-key system, yet I have a keysense wire... do I need a bypass module for my Remote Start unit? If so, will connecting to Ground -When-Running wire or strait to ignition wire work? Thankyou

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fastboyz
  • 674 Answers

SOURCE: 2002 Hyundai Accent Problem

first thing i need to know is did the timing belt break?
second is are you sure you aligned the timing marks and after the belt tensioner was tight you rechecked to make sure the timing stayed where you had it.
next step would be a compression check to if a valve was bent whenchanging the belt
i have seen this happen and this engine is an interferance engine.
later paul

Posted on Sep 28, 2008

  • 88 Answers

SOURCE: hyundai accent 2006 brake lights not working

brake light switch under the brake pedal. COMMON PROBLEM OF ACCENTS. 15 TO 20 BUCKS

Posted on Dec 23, 2008

ghost4548
  • 776 Answers

SOURCE: trying to find the fuel filter in a 2006 Hyundai Accent

YEP! It's in the fuel tank at the bottom of the fuel pump... it's called a 'SOCK.'

Posted on Jun 30, 2009

  • 2 Answers

SOURCE: car will not go in reverse!

Have you changed your transmission fluid? I am assuming that it is automatic.Could be low on transmission fluid. Could also be filters in you tranny stopped up with slug/ gear shivers.Could also be band
in transmission needs adjusting.

Posted on Jul 08, 2009

  • 750 Answers

SOURCE: Transmission: Reverse

check power going to reverse shift solynoid and check neutral switch

Posted on Sep 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a wiring or instalation diagram for 03 silverado


Download manual from the attached link: https://www.gmupfitter.com/publicat/2004_BB/2003_Beyond_LD_Electric_CK.pdf
http://alarmsellout.com/support/diagrams/vehicle/CHEVROLET%20SILVERADO%201988-2005.pdf

This may help:
http://www.automotivetroubleshootingsecrets.com/2003_Chevrolet_Silverado_1500_4.8L_No_Start_Stall.html

This may help:
2003-2006 Chevrolet Silverado Wiring Diagram:
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2003-2006 Chevrolet Silverado . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections.

PART COLOR LOCATION 12 VOLT CONSTANT RED (+) @ IGNITION SWITCH HARNESS STARTER YELLOW (+) @ IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 PINK (+) @ IGNITION SWITCH HARNESS IGNITION 2 WHITE (+), SEE NOTE #2 @ IGNITION SWITCH HARNESS IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 ORANGE (+) @ IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 BROWN (+) @ IGNITION SWITCH HARNESS KEYSENSE N/A PARKING LIGHTS ( - ) GRAY/BLACK (-) @ BCM, BROWN PLUG, PIN B2, SEE NOTE #3 PARKING LIGHTS ( + ) BROWN (+) IN DRIVERS KICK PANEL POWER LOCK SEE NOTE #1, (for BASE MODEL TRUCKS, SEE NOTE #4) POWER UNLOCK SEE NOTE #1, (for BASE MODEL TRUCKS SEE NOTE #4) DOOR TRIGGER GRAY/BLACK (-)(DRIVERS) and BLACK/WHITE (-)(PASSENGER), SEE NOTE #5 @ EACH DOOR MODULE, IN EACH DOOR DOMELIGHT SUPERVISION GRAY/BLACK (-) @ BCM, BLACK PLUG, PIN E, SEE NOTE #3 TRUNK RELEASE N/A SLIDING POWER DOOR N/A HORN BLACK/YELLOW to BLACK (-) @ STEERING COLUMN HARNESS TACH Any wire NOT, PINK, BLACK or BROWN (AC) @ IGNITION COILS or FUEL-INJECTORS WAIT TO START LIGHT DK. BLUE (-) @ INSTRUMENT CLUSTER, PIN A2 BRAKE WHITE (+) @ BRAKE PEDAL SWITCH FACTORY ALARM DISARM LT. GREEN (-) @ DRIVERS DOOR MODULE, IN DOOR, BLACK 26-PIN PLUG PIN 15 ANTI-THEFT GM'S PASSLOCK 2 ANTI-THEFT SYSTEM, SEE NOTE #1 @ IGNITION SWITCH EXTRA INFORMATION NOTE #1: This vehicle uses GM'S PASSLOCK 2 ANTI-THEFT SYSTEM that requires a 791 Bypass Module to Remote Start, if you are using a REMOTE STARTER ONLY, use the 791. IF you are installing a REMOTE STARTER with KEYLESS ENTRY you MUST USE the INTERFACE BYPASS MODULE, Part # DB-ALL or XK09, EITHER Bypass will do the Anti-theft and Keyless entry. If connecting a keyless entry only you can use the GMDL-BP. NOTE #2: The IGNITION #2 wire WHITE must be connected to prevent a CHECK ENGINE LIGHT from turning on and to prevent DAMAGE to the TRANSMISSION on this Vehicle. NOTE #3; The BCM is located under the Drivers Side of the dash, the BCM has 6 plugs on it, with the PURPLE plug on the back. NOTE #4: On BASE model truck the DOOR LOCK INTERFACE MODULE is not necessary, the LOCK wire is a LT BLUE (TYPE B) @ the BCM, LT BLUE PLUG, PIN B5, and the UNLOCK wire is a WHITE (TYPE B) @ the BCM, LT BLUE PLUG, PIN B10. NOTE #5: On BASE Model trucks, the Door Trigger wires are @ the BCM, LT BLUE PLUG, PINS B4 and A5. On 4-Door Trucks the LEFT REAR Door is a LT BLUE/BLACK (-) PIN A3 and the RIGHT REAR Door is a LT GREEN/BLACK (-) PIN A2, located in a PURPLE PLUG at the BCM, use all 4 wires and diode isolate when installing an alarm system.
03 silverado wiring diagram-dfydxumns33ohqc3bsmt22yf-2-1.jpg

2011-03-23_212446_1-dfydxumns33ohqc3bsmt22yf-2-4.gif

2011-03-28_044351_brakes_lamps_circuit_2003_2500_siverado-dfydxumns33ohqc3bsmt22yf-2-8.gif

2012-06-07_153513_starter1-dfydxumns33ohqc3bsmt22yf-2-13.gif

chevroletsilveradohorncircuit_thumb-dfydxumns33ohqc3bsmt22yf-2-19.jpg

chevrolet-silverado-wiring-diagram-wire-diagram-dfydxumns33ohqc3bsmt22yf-2-26.png

collection-fuel-2003-chevy-silverado-wiring-diagram-estimation-information-standard-work-therefore-straight-swapped-dfydxumns33ohqc3bsmt22yf-2-34.jpg

drivers2-dfydxumns33ohqc3bsmt22yf-2-43.jpg

igniton-black-2003-chevy-silverado-wiring-diagram-neutral-before-position-begin-switch-know-scheme-unsure-pairs-dfydxumns33ohqc3bsmt22yf-2-53.png

passen2-dfydxumns33ohqc3bsmt22yf-2-64.jpg

sensor-primary-2003-chevy-silverado-wiring-diagram-fuel-pump-plugs-solid-conductors-important-looking-more-channels-dfydxumns33ohqc3bsmt22yf-2-76.png

2011-03-07_083537_3-7-2011_12-28-24_am-dfydxumns33ohqc3bsmt22yf-2-89.png

2011-03-23_212446_1-dfydxumns33ohqc3bsmt22yf-2-103.gif

2011-05-14_175028_2003_stop_lamps-dfydxumns33ohqc3bsmt22yf-2-118.gif

2012-06-07_153513_starter1-dfydxumns33ohqc3bsmt22yf-2-134.gif

igniton-black-2003-chevy-silverado-wiring-diagram-neutral-before-position-begin-switch-know-scheme-unsure-pairs-dfydxumns33ohqc3bsmt22yf-2-151.png

Apr 16, 2017 | Cars & Trucks

1 Answer

How do I arrange my spark plug wires on my Hyundai Getz go 2002


How to change spark plugs hyundai accent 01 - 05 - YouTube

? 3:18
https://www.youtube.com/watch?v=tU2vwisJ7v4
Feb 16, 2012 - Uploaded by PNBNC
I filmed this right after changing my old plugs, I figured it was easy enough to film and some people can profit from it. for a ... Coil, you mean wire lol ... When you go to put the spark plug back in, never start it with the ratchet.

How To Replace Change Install Spark Plugs 2001-06 ...

? 3:17
https://www.youtube.com/watch?v=yVV2KcPDFIo
May 14, 2013 - Uploaded by 1A Auto Parts
... spark plugs. This video is applicable to the 2001, 2002, 2... ...spark plugs. This video is applicable to the 2001, 2002, 2003, 2004, 2005, 2006 Hyundai Elantra 2.0L. ... +queentonks A little know-how can go a long way. We're glad ... When do you think is good to replace my spark plugs wires? My spark ...
2001 Hyundai Accent Firing Order: Engine Mechanical ...www.2carpros.com/.../hyundai-accent-2001-hyundai-accent-firing-orderApr 23, 2009 - Engine Mechanical problem 2001 Hyundai Accent 4 cyl Two Wheel Drive Manual 95000 ... Now I'm trying to figure out how they go back on. How do I find out the Engine Firing Order for my car - Hyundai Accent 2001 1.5L?Which is cylinder 1 - 1.6 Accent - Hyundai Forum: Hyundai ...www.hyundaiperformance.com/.../16837-cylinder-1-1-6-accent.htmlJan 13, 2003 - 3 posts - ‎3 authorsFrom what I read though, the coil pack is configured as 1 4 2 3. I'm assuming the first wire on the coil pack goes to cylinder 1. Can anyone ...

Dec 16, 2015 | Hyundai Cars & Trucks

2 Answers

What wires do I connect to to bypass the neutral safety switch on a 2002 Hyundai accent gl


dont just replace it disabling it can kill you or someone else

Jun 22, 2014 | Cars & Trucks

1 Answer

2002 Hyundai Accent Problem: intermittent


What your car is shouting at you is that there is a low power problem. This may be simply a battery cable or a corroded connection but the systems are not able to get the power they need. I would take the vehicle to a AutoZone (or competitor) as they have free diagnostics for the battery, alternator and etc. They can also read the codes in the OBC module.

Dave

Jul 04, 2017 | 2002 Hyundai Accent

1 Answer

Hyundai Accent viva diesel


I think they are talking about a cv joint and no the entire shaft doesn't have to be replaced. There are shaft reconditioning shops that are less expensive and if you get one from a reputable shop will last a considerable time . Or you can get a shaft from the wreckers from a car that has been rear ended and possibly low mileage

Jul 15, 2013 | Cars & Trucks

1 Answer

I am looking for a diagram for timing marks on a 2006 hyundai accent


Go to www.hmaservice.com and register your vehicle by VIN #.. you'll then have access to wiring diagrams, shop & owner manuals, service bulletins, campaigns, illustrations and procedures, etc

Aug 26, 2011 | 2006 Hyundai Accent

1 Answer

96 hyundai accent with no spark and no power to


hi there i have a 96 hyundai excel,car has no dash lights or power to start the car,ive try my immobilizer but stil cant find the problem,does any one know how to bypass the immobilizer??ive disconnected all immobilizer wirers so far and re joint them to the original wires but stil no luck...any help would be appreciated

Feb 08, 2010 | 1996 Hyundai Accent

1 Answer

How to fix brake light on a 2007 hyundai accent


Since you have listed this Accent as a 2006 AND 2007, Go to www.hmaservice.com and register( Vehicle by VIN). Afterward, you have access to shop manuals, service bulletins, wiring diagrams, etc. about your vehicle.

Oct 02, 2009 | 2006 Hyundai Accent

2 Answers

I need electrical plan for pluging my radio ,for toyota echo 2005


If you are attempting to install an aftermarket radio Don't butcher the plugs on your Toyota ... simply go to a car stereo shop and buy an adapter plug for $10-$20 then wire it to your new radio ... then just plug them together (the wires on the adapter are marked) You'll likely need a dash kit too ... save yourself from a lot of frustration time and money! ....

May 08, 2009 | 2005 Toyota ECHO

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...