Question about Ford Ranger

Open Question

Remove and install intake manifold 1993 ford ranger 3.0

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
psds4
  • 293 Answers

SOURCE: 1998 chevy tahoe 5.7 intake manifold removal

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c1528008effd
this should help

Posted on Oct 23, 2008

Ad
  • 58 Answers

SOURCE: Replacing an intake manifold gasket on 1993 ford ranger 4.0

I've replaced several of these gasets and they were made that way.
It wouldn't hurt to call a different autoparts store and ask them if theirs are made that way.

Posted on Jan 07, 2009

66 chrgr
  • 1011 Answers

SOURCE: INTAKE MANIFOLD CONTRL RUNNER VAVLE LOCATIONS

they are on the back side of the motor just above the transmission .take off the dog house and you will see the unit.

Posted on Jan 25, 2009

chuck943
  • 783 Answers

SOURCE: Ford 460 Intake Manifold Torque spec

22 to 35 ft lbs

Posted on May 22, 2009

  • 33 Answers

SOURCE: removal and install timing belt 1994 ford ranger/

Depends on the engine.

Posted on Oct 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I just need to look at a picture of intake manifold for 1988 ford ranger 2.3l


Here's a link that might have what you need:

https://www.google.com/search?q=intake+manifold+for+1988+ford+ranger+2.3l&biw=1429&bih=616&source=lnms&tbm=isch&sa=X&ved=0ahUKEwiJs9WuhKDLAhVBOz4KHWyMAGsQ_AUIBygC&dpr=0.9

Mar 01, 2016 | Ford Cars & Trucks

2 Answers

Where are freeze plugs for a 1993 Ford ranger?


there are three located just below exhaust manifolds outlets on each side (six total) , they do require a special tool to remove/ install them correctly and a engine rated sealant as well too keep them in place they are avail for purchase individually but in sets as well

Nov 30, 2015 | Ford Cars & Trucks

1 Answer

How do I remove 93 ford probe intake manifold


2.0 or 2.5?
here is 2.0
if you need more just let me know
  1. Disconnect battery ground cable, then isolate cable end with electrical tape or equivalent.
  2. Remove air intake system and fuel line mounting bracket.
  3. Disconnect throttle cable.
  4. Disconnect coolant line from idle air bypass air valve.
  5. Disconnect coolant and vacuum lines from throttle body. Mark vacuum lines for installation reference.
  6. Disconnect throttle position sensor connector.
  7. On models with automatic transaxle, disconnect idle switch connector.
  8. Disconnect brake booster vacuum line from back lefthand side of intake manifold.
  9. Disconnect EGR temperature sensor connector, if equipped.
  10. Disconnect speed control vacuum line from back righthand side of intake manifold.
  11. Disconnect EGR solenoid connectors.
  12. Remove PCV valve from cylinder head cover.
  13. Raise and support vehicle.
  14. Remove intake manifold support bracket, then the EGR pipe from intake manifold.
  15. Lower vehicle and remove intake manifold attaching bolts and nuts.
  16. Remove intake manifold and discard gasket.
Intake Manifold Tightening Sequence 42193235

  1. Reverse procedure to install. Torque bolts and nuts in sequence to 14-19 ft lb.
My name is Tim and I work for a company called AutoEcu1 We specialize in many different controllers such as abs ebcm ecu ecm tcu tcm climate controllers dash clusters speedometers and so much more. If you need further assistance on this or any other vehicle please post here or call us at 800 921 9060 good luck!
Regards,
-Tim

Jan 09, 2015 | 1993 Ford Probe

1 Answer

Where is the pcv valve located on a 1993 ford ranger xlt 2.3L ?


I'll do my best to explain. The PCV is located center, upper engine area, driver side of engine, between engine block and intake manifold, mounted in vacuum hose. I hope you got that and that it helps you. Good luck.

Mar 24, 2011 | 1993 Ford Ranger SuperCab

1 Answer

HOW TO INSTALL CAM SENSER ON 1993 FORD RANGER 4.0


its right behind the intake manifold. its a B*&^h to get off but you need a special tool you can get a most auto part stores. you have to make sure your #1 piston is TDC on your compression stroke. then drop in your sensor, align it to what your specs say

Nov 18, 2009 | 1993 Ford Ranger SuperCab

1 Answer

My 2002 Ford Ranger starts fine just replaced the battery. After it starts it will rev up to 1800 then back down to 200. It will do this maybe 3 time before it dies. i can hold the pedel down to keep it...


probably have a vacuum leak where the Upper Ram of the Intake manifold meet the Lower Intake Manifold. Listen for a vacuum leak (hissing sound) near that point, We used to spray a small amount of Carb cleaner near the joint of the 2 Manifolds & observe for a change in the Engine speed, to verify the vacuum leak.

Nov 11, 2009 | 2002 Ford Ranger Regular Cab

1 Answer

1997 FORD RANGER. HOW DO YOU ACCES LEFT REAR SPARK


You have to remove the front passenger side tire and access it from underneath.

Aug 21, 2009 | 1997 Ford Ranger SuperCab

1 Answer

Replacing an intake manifold gasket on 1993 ford ranger 4.0


I've replaced several of these gasets and they were made that way.
It wouldn't hurt to call a different autoparts store and ask them if theirs are made that way.

Dec 28, 2008 | 1987 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...