Question about 1992 Geo Storm

1 Answer

My son broke the power window lock in my 89 toyota landcruiser, I can no longer roll down any windows besides the driver's side. I need to know the best way to take apart the passenger door so I can pull out that window without breaking it.

Posted by on

  • 2 more comments 
  • hgulbrantson May 08, 2009

    no it is a 1989 toyota landcruiser wagon

  • yadayada
    yadayada May 11, 2010

    relist the problem under the correct car

  • yadayada
    yadayada May 11, 2010

    this is a Geo storm?

  • Anonymous Mar 19, 2014

    windows wont work window cranks break

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 284 Answers

I have a 1989 Landcruiser but without power windows so I will tell you what I know about mine.

First remove the arm rest. you will need a large phillips head screw driver for this. Then remove the plastic trim around the door handle. This is only one regular sized phillips screw. Carefull not to do this one up too tight when you put it back on or it will crack.

The door trim is held on by about 10 plastic plugs around the edge that just pop out. Put a large flat blade screw driver behind the trim up close to where each pin and with a little twiste is should pop off. The wood isn't that strong (masonite) so you need to be gentle.

I don't know how the window switch or the door lock works as mine are mechanical but I imagine there would be some spare cable so you can partialy remove the trim and get your arm in to remove the cables.

Once the trim is off the car you should be able to see how to remove the switch.

You will probably have to get a new switch from toyota or a wreckers.

Good luck :)

Posted on Jul 07, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why do the power windows on the drivers side roll half way down?


I have heard of this problem when the window regulator has been changed or disconnected from the car. There is a procedure you need to do before you install it (I don't know exactly what the procedure is).

Aug 02, 2014 | 2009 Toyota Venza

1 Answer

2002 VW Jetta GL - Window & Mirror Controls no longer functioning


Check the wire bundle coming in to the door at hinge side. It is a short or broken wire

May 17, 2014 | Volkswagen Jetta Cars & Trucks

1 Answer

Driver door won't lock or open with key and window rolls down by itself


you will need to remove the door panel and check out the back of the key lock ,something is broke here thats for sure

Jun 15, 2012 | 2001 Toyota Highlander

4 Answers

2006 Toyota Avalon- Changed the battery and the driver side button to roll the passenger side window down doesn't work. The remainder of the buttons work, just not that single button. The passenger side...


try going to passenger door window switch and reset it by going down and holding for extra 3to5 seconds after window is down, do same to go up, then try doing it with master switch don forget to hold it longer, this is a reset also used on Scion vehicles, hope it helps.
Good luck

Jan 09, 2011 | 2005 Toyota Avalon

1 Answer

My power windows and locks just stopped working 89 camry


Is this happenning on the driver's side control bezel only?

Mar 11, 2010 | 1989 Toyota Camry

1 Answer

Drivers side fr window rolls down but not back up


try to replace switch or check your wiring might be broke

Jun 30, 2009 | 1997 Jeep Grand Cherokee

1 Answer

Broken Master Lock for Power Windows in 89 Toyota Landcruiser


Looks like I just described the solution to the same problem here.
http://www.fixya.com/cars/t2178229-son_broke_power_window_lock_in_89_toyota

First thing you need to do is get a replacement part from toyota or a wreckers.

Jun 06, 2009 | 1992 Geo Storm

2 Answers

07 scion tc passenger window wont roll down when lock by driver..


thats cause that what the lock is for so it wont go down

Jun 06, 2009 | 2007 Scion tC Coupe

1 Answer

Rear window will not roll down


I had the same problem but it turned out to be the safety switch that is in the drivers side gate latch. To get to it you must roll down the window. I did this by disconnecting the motor and attaching a cordless drill battery to the ternminals at the harness. One way rolls up and switch the connection to roll down. Take off the drivers side latch (three screws on gate edge) and there is a switch inside the latch. My local toyota dealer didnt have the swicth so I just took it out of the loop. This solved my problem, but there is about 4 switches/relays in the gate alone that can give you the same problem.

Dec 30, 2008 | 1985 Toyota 4Runner

3 Answers

Driver side window


the window gears are worn out,

Aug 15, 2008 | 1995 Toyota Camry

Not finding what you are looking for?
1992 Geo Storm Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Geo Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7727 Answers

Are you a Geo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...