Question about 2011 Mercury Milan

Open Question

Headlights vehicle Will not work on low or high beam

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 580 Answers

SOURCE: No headlights, they work if I hold the high beam/wiper arm back

If you have an AUTO off/on/delay this could be malfunctioning, you may also need a need headlight switch however, First check your low beam halogen bulbs if they are bad replace BOTH at the same time they tend to fail at a similar time and this is the least costly repair NOTE wen changing these do not touch bulb with bare hand as oils from your skin can cause the to heat unevenly and explode inside your headlight assembly Use rubber gloves most Parts stores have these available for this reason

Posted on Jul 10, 2009

  • 580 Answers

SOURCE: low beam dont work,2003 crown vic

It may also be a bad high/low beam switch.

Posted on Jul 10, 2009

  • 1 Answer

SOURCE: Headlights do not work

It cost me just under $700.00 to have a dealership replace the headlight control module.

Posted on Nov 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My left my left side headlight does not work the high beam work but the low beam does not work what could cause that


The bulb has gone, or it may be the fuse. Modern cars have separate bulbs for high and low beams. They are separate reflectors, on in different locations within the same reflectors. Older models use a bulb with two elements.

Google

year make model headlight bulb

and you will end up somewhere like this for my vehicle


Get the Best Priced Lexus ES330 Headlight Bulb

Mar 30, 2017 | Cars & Trucks

3 Answers

How to adjust halogen headlights (too low now)


there example of how to do it i would been more acurate but you didnot mention the year make and model hope it help you

Apr 08, 2015 | Cars & Trucks

3 Answers

My '93 lexus headlights won't turn on. if I hold the switch to "flash" the high beams, the lights are on, but just to drive at night or during the rain, nothing lights.


Go to your local auto parts store and buy some new ones. They will help you put them in. It sounds like you lost the low beams. When the low beams go out the high beams will still work. It just sounds to me like the bulbs are out. if not they shouldn't charge you for the bulbs.

May 15, 2014 | 1999 Toyota Camry

1 Answer

High/Low beams switched after headlight replacement.


I can find out which color wires are for which bulbs if that would help.

Aug 08, 2012 | 2001 Ford Escort ZX2

1 Answer

2005 Dodge Magnum low beams do not work


Obviously you have a connector which has come partially apart somewhere between the Headlights and the Headlight Switch. Most modern vehicles have several connectors between the Headlight Switch and the Headlights, Start at the Firewall Connector and work forward toward the Headlights making sure all connectors are securely mated. Another remote possibility is that you have fractured the "Low Beam Filaments" in BOTH Headlights. You don't mention how hard you hit the Speed Bump but if it caused the car to "Bottom Out" the front suspension it was a hard enough impact to fracture the filaments. You can use a 12 Volt Test Light at the Sockets for the Headlight Bulbs and see if you are getting 12 Volt power there. If you are in Low Beam position you have fractured the filaments. Check with High Beam too.

Nov 18, 2011 | 2005 Dodge Magnum

1 Answer

I have a mazda 6 that has a headlight problem, low beams do not work and high beams do. It started with one light goning out and next time i started the car the second one went out. Also front makers went...


if your vehicle has H4 headlight bulbs fitted you will find that they have both high & low beam filaments in them,what has most likely happened is that the low beam filaments are blown & the bulbs need to be replaced, also you may find that high & low beam circuits are on separate fuses, & also the front markers may have there own fuse check the fuses as well.......hope this helps......cheers.

Aug 17, 2011 | Mazda MAZDA6 Cars & Trucks

1 Answer

Does this model use a 4 headlight bright system? I have 2 low beam lights but when I put on the bright lights the 2 low beam lights go out and only the 2 bright lights stay on.


I think that many 1990s and even some 1980s GM vehicles with seemingly 4 headlight systems actually use only 2 at a time.

My 1990 Oldsmobile Cutlass Calais, for instance, had 2 high beams that went on independently of the 2 low beam lights when switched with the turn signal lever.

In the 1970s the GM vehicles had 4 headlight systems where all 4 headlights would go on, but they used sealed beams rather than the capsule lights that are used nowadays.

For instance, our 1976 Cadillac Seville has a 4 headlight system that lights up 4 headlights on the high beam mode.

Good luck on seeing at night with the current set up.

Dec 09, 2010 | 1992 GMC Sierra

1 Answer

2005 Honda CRV High Beam


Honda Headlight Bulb(H1) - This bulb is the high and low beam bulb for your vehicle. One bulb required for each headlight.

This headlight bulb fits:
  • CR-V 2005-2006 (requires 2 bulbs per side)

Mar 21, 2009 | 2005 Honda CR-V

3 Answers

Low beam headlights do not work, but high beam headlights do


Clyde,

I've been troubleshooting this same problem on a different vehicle this week, and I can give you the steps I'd take.

1. If both sides went out at the same time, the problem is *NOT* likely to be the bulbs.

2. Check the fuses to see if both low beam lights are on the same fuse. Many cars have one fuse for low beam and another for high beam, so both lights out at the same time typically means fuse blown.

3. If the headlights are OK and the fuses are OK, then the problem is *LIKELY* the headlight switch. In my case, AutoZone has one and it can be installed easily; but in your case, that may not be as simple.

Please post your findings or comments.

Jul 16, 2008 | 1991 Nissan Pickup

Not finding what you are looking for?
2011 Mercury Milan Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...