Question about Kia Sorento
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: faulty temperature sensor
Engine overheats, will not register.Causes problems with the computer programing. Take your car to an Autozone or similar store and get a code scan for free.
Posted on Dec 16, 2008
SOURCE: Check engine light comes on,
DTC P0183 - FUEL TEMPERATURE SENSOR, TERMINAL "A" IS INTERMITTANT
A new Fuel Temperature Sensor (FTS) has been introduced in the 2003 model year 2.4L and 3.5L Santa Fe, 2.4L Sonata and XG350. The new sensor measures fuel temperature in the fuel tank. The ECM uses this information for the Evaporative Emissions Self Check.
Fuel vapor pressure increases when fuel temperature increases. The ECM references the fuel temperature and indirectly compensates for the fuel vapor pressure during the evaporative emissions leak check. The FTS is located inside the fuel tank and is mounted to the fuel pump assembly.
The ECM can set Diagnostic Trouble Codes (DTC) relating to the FTS: - P0183 = Open Circuit, Signal voltage is greater than 4.6V
PART NUMBER INFORMATION:
- 31435-3B500 (Production Date 10/1/02 to 10/18/02)
- 31435-38300 (Production Date 10/19/02 to current)
I don't think you would need to replace the whole fuel pump assembly. Tell your dealer to look up TSB # 03-36-015
Posted on Aug 18, 2010
EOBD Code: P0183 - Fault location: Fuel temperature sensor A - high input. Probable cause: Wiring short to positive, fuel temperature sensor bad, ECM bad.
Posted on Sep 12, 2010
SOURCE: code P0113-P0183
DTC P0113 - Intake Air Temperature Circuit High Input.The powertrain control module (PCM) monitors the temperature of the air entering the engine. The PCM supplies a 5 volt reference voltage to the Intake Air Temperature (IAT) sensor. The IAT is a thermistor that varies resistance based on temperature. As the temperature increases, resistance decreases. Low temperature results in a high signal voltage. When the PCM sees a signal voltage higher than 5 volts, it sets this P0113 check engine light code.
DTC P0183 - Fuel Temperature Sensor Circuit High Voltage.
I suggest to check wire connections.
Posted on Apr 13, 2012
Tips for a great answer:
Sep 21, 2015 | Cars & Trucks
Apr 11, 2015 | 1996 Subaru Legacy
Dec 10, 2014 | 2007 Dodge Nitro SXT
Apr 13, 2012 | 2005 Nissan Quest 3.5
Oct 28, 2009 | 2001 Hyundai Santa Fe
Apr 29, 2009 | 2001 Hyundai Santa Fe
Oct 30, 2008 | Mitsubishi Galant Cars & Trucks
82 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: