Question about 2003 Chevrolet Suburban 1500

Open Question

2003 suburban Tachometer "Instrument cluster, Pin A5"

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
BigBlue77
  • 59 Answers

SOURCE: Oil gauge on my instrument panel is not working on my 03 suburban

The bezel around the cluster is just cliped on. You will have to set the parking brake and put the gear selector in 1st gear and pry around the bezel to release the clips. The cluster is held in with 4 7mm screws.

Posted on Sep 06, 2008

Ad
  • 1 Answer

SOURCE: trying to convert a 1990 Chevy k1500 instrument

did you get an answer to this question?
Basically you need the DRAC out of the donor vehicle. It is located behind the glove box. 3"x3" square box. Depending on axle gear ratios and tire size you may need to change the jumper settings to allow your speedometer to read properly. This is a very simple procedure.
To convert any 88 and later to the 94 dash you will need not only the drac but get it's harness with at least 6" of its wiring as well.
You will need the 94 dash plug also with at least 6" of wiring on it too.

Posted on Feb 16, 2010

  • 731 Answers

SOURCE: I'm trying to remove instrument

ANY time you do any work on the electical system in a car its agood idea to disconnect the battery.
It'a like unplugging the toaster before digging for that stuck piece of bread

Posted on Dec 22, 2010

  • 5537 Answers

SOURCE: no power to instrument cluster

Hello, I would look in the Owners Manual for the fuse that controls the gauges. These are usually combined with low demand items like a glovebox light. I am thinking a 5 AMP fuse. Since there are only a few low AMP fuses in the fusebox, you may be able to pull all 2 or 3 fuses and check them for a burn-out.

This Fixya site is suppose to have a Diagrams section, but sometimes entering what you want on a WEB search will get you your information. There are many pay-sites for this info, so you will have to weed them out to get the info free. Just enter something like 2003 Trailblazer fusebox photos or diagrams.

Posted on Nov 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tachometer registers sparadiclly


The gauges in the instrument cluster are driven by stepper motors, sometimes these motors go bad. More than likely your tachometer problem is caused by a bad stepper motor. If you are handy, the instrument cluster can be removed and sent out to a repair center. Check on Ebay for repair persons.

Dec 15, 2013 | 2003 Chevrolet TrailBlazer

Tip

How to remove a 2003, 2004, 2005, 2006 Silverado Instrument Cluster


For a free guide showing step-by-step how to take out the instrument cluster in an 03-06 Silverado, Sierra, Yukon, Tahoe, Suburban or Escalade go here: How do get my instrument cluster out

on Nov 06, 2014 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

2003 Silverado 4.8 V8. Speedometer and tachometer, as soon as underway, read past maximum. When engine is shut off guages do not return to "0"


Hi Norton,

What has happened is your speedometer and tachometer drive motors are failing inside your silverado instrument cluster. I see this very often in GM trucks, to fix the problem you need to have your instrument cluster rebuilt.

Check out this article that talks more about it http://drspeedometer.com/chevy-silverado-instrument-clusters-why-they-quite-working

Thanks,
Fred

Sep 27, 2010 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

My gmc yukon 2003 tachometer does not work properly


This is common on the 03-06 Yukon instrument clusters and is caused by failing stepper motors on the cluster's circuit board. It is fixable though, check out this page for more on how to get it fixed - Yukon tachometer does not work

Mar 21, 2010 | 2003 GMC Yukon

3 Answers

The speedometer no work, suburban 2003


Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great. How to guide for Suburban instrument cluster repair


Feb 09, 2010 | 2003 Chevrolet Suburban 1500

1 Answer

My 2003 GMC Envoy tachometer is reading 5-7000 rpm at idle and sweeps off the scale when driving.


I see this a lot on the 03-06 Envoy instrument clusters, it's caused by failing stepper motors on the cluster's circuit board. It can be fixed though, check out this page about how to get it fixed - Envoy tachometer not working

Jun 07, 2009 | 2003 GMC Envoy

2 Answers

Tachometer starts at different spot all the time & sometimes cant pass because of rev limiter too high


Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Silverado instrument cluster repair
Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Sierra instrument cluster repair

Mar 28, 2009 | 2003 GMC Sierra

2 Answers

Oil gauge on my instrument panel is not working on my 03 suburban


We have a removal guide on our website that should help you out, you'll see a link for it on lower left hand side of our home page. Dr Speedometer Instrument Cluster Repair Speedometer Repair Guage...

Sep 06, 2008 | 2003 Chevrolet Suburban 1500

3 Answers

Gagues stopped working, even the digital readout, on my 2003 Chevy Suburban The wire harness is connected properly. Any ideas on how to fix this problem?


I'm going to assume you checked the fuses, and say that the display panel will have to be replaced. On these the display is all one piece, and when one gage goes out it effects the whole thing. Some of these display panels had in line fuses on the inside circuitry, so you may be able to pull the display and change the fuse. Others were built as a sealed unit and cannot be taken apart.

Aug 21, 2008 | 2003 Chevrolet Suburban 1500

Not finding what you are looking for?
2003 Chevrolet Suburban 1500 Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8514 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...