At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The flasher unit on a Toyota Land Cruiser HZJ75 is usually located in the fuse box under the dashboard on the driver's side of the vehicle. To access the flasher unit, you will need to:
Open the driver's side door and locate the fuse box cover. It is usually located under the dashboard on the left side of the steering wheel.
Remove the fuse box cover: Depending on the model of your Land Cruiser, you may need to use a tool like a flat-head screwdriver to gently pry the cover off.
Locate the flasher unit: Once the cover is removed, you should be able to see the various fuses and relays in the fuse box. The flasher unit is usually labeled as "flasher" or "turn signal relay." It may be a small, rectangular component with wires or terminals attached to it.
Remove the flasher unit: Depending on the model of your Land Cruiser, you may need to use a tool like a socket wrench or pliers to remove the flasher unit. Some models may have a clip or tab that holds the flasher unit in place, which you will need to release before removing it.
Replace the flasher unit: Reverse the steps above to install the new flasher unit. Make sure the new unit is securely fastened and all the wires and connectors are properly connected.
If you are not comfortable or experienced in automotive repairs, it is recommended to have a mechanic perform the flasher unit replacement.
if you google Where is flasher relay located on 1999 Chevrolet Silverado 1500 you will find answers. Look above the fuse box under the left side of the dash to locate the flasher unit. The flasher is a square unit that looks like a relay. It will have its own receptacle mounted separately from the fuse box.
Older vehicles can and often did have the flasher unit almost anywhere - behind the speedo, inside the steering column shroud, under the dashboard, behind the glovebox... Then there was a lengthy period when the fusebox was the logical place to find the electronic relay that often shared duty as the hazard flasher unit.
Lots of modern cars do not have a separate flasher unit but are fitted instead with a single ECU dedicated to controlling all those things on a car needing timing - flashers and hazard flashers, interior lights screenwipers and so forth.
It's the same flasher unit for both turn signals AND emergency flashers. Even though one side works, the other won't. If you have a good fuse for the turn signals, then replace the flasher unit.
if its a turn signal flasher unit your looking for it's underneath the dash on the drivers side..if its a main flasher unit your looking for, its in the fuse panel on the side of the drivers side dash...not sure which flasher unit your looking for
light goes on but doesn't blink is typical of a bad flasher unit. Flasher units usualy have two wire connections. Flashers can be round or square. Try replacing flasher with another known working flasher unit.
locate the hazard flasher unit under the dash by turning on flasher and feel flasher unit clicking. the turn flasher unit looks ths same and is close to the signal flash unit and may be interchangable. switch the 2 units and see if the turn flashers work now and replace faulty flash unit
The most common cause of your problem is the Flasher Unit. Functioning four way flashers doesn't mean the existing unit is working. Also, there are multiple flasher units on some cars. Since the bulbs are all working, replacing the flasher unit makes the most sense.
The hazards and the flashers are on seperate circuits.When the flashers are working properly you will hear a clicking during operation.If not,check all the bulbs.If both flashers don't work it may be a blown fuse,faulty flasher unit or a loose wire or connection.Probably the flasher unit.Make sure the new one is the same as the old one by comparing the two,On yours,its a combination flasher and hazard unit.It will need to be replaced.its small and cost is minimal.When you do replace the unit,disconnect the neg. cable from the battery.The unit relay may be blue in color.Hope this helps
×