Question about 2011 Mazda BT-50 L-Cab

Open Question

Remove Door Panel - 2011 Mazda BT-50 L-Cab

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove passanger side door panel 2012 auston martin db9


Its just fitted with few screws and hidden lock clips.The clips are very delicate and can break easily.But no worry,the clips are easily available.
on some vehicle models these screws are hidden.Once the panel is loose, don't just pull it out,there are few wire connectors connected,first disconnect the connector plug,then lift the panel out and keep in safe place for re-installing.
For your help,there are few very helpful similar help links with diagrams and solutions to make your task easy.Click the link below:----How to Remove Door Panels on Acura Integra
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html

-------How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

---------

Vehicle door panel components?
http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html
----------How to remove the door panel to install a new window regulator on Cadillac Deville?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html
---------------
Hummer H2 Door Panel Removal? http://technoanswers.blogspot.in/2012/07/hummer-h2-door-panel-removal.html
------- Hummer H2: How to remove Front Door panel? http://www.howtobyme.blogspot.com/2012/07/hummer-h2-how-to-remove-front-door.html
-------------- 2009 Hummer H2 Door Panel Removal http://schematicsdiagram.blogspot.in/2012/07/2009-hummer-h2-door-panel-removal.html
-----------how to remove window motor on driver side door panel on 1994 Oldsmobile Cutlass Ciera
http://technoanswers.blogspot.com/2011/08/how-to-remove-window-motor-on-driver.html
------------How to remove door panel, door window motor and regulator on 1991 cavalier?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html
-------------
how to remove rear window inner panel on Hyundai Elantra?
http://technoanswers.blogspot.com/2011/05/how-to-remove-rear-window-inner-panel.html
------------
ford explorer window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html
------------
These details will help.
Thanks,.

Nov 23, 2012 | Cars & Trucks

1 Answer

How do I remove the driver door panel on a 2002 cadillac deville


DOOR PANEL REMOVAL



Its just fitted with few screws and hidden lock clips. The clips are very delicate and can break easily. But no worry, the clips are easily available.

On some vehicle models these screws are hidden. Once the panel is loose, don't just pull it out, there are few wire connectors connected, first disconnect the connector plug, then lift the panel out and keep in safe place for re-installing.


For your help, there are few very helpful similar help links with diagrams and solutions to make your task easy. Click the link below:----


How to Remove Door Panels on Acura Integra
http://repairhelpcenter.blogspot.com/2011/11/how-to-remove-door-panels-on-acura.html

-------

How to Access car door panel?
http://howtobyme.blogspot.com/2011/11/how-to-access-car-door-panel.html

---------

Vehicle door panel components?

http://howtobyme.blogspot.com/2011/11/vehicle-door-panel-components.html

----------
How to remove the door panel to install a new window regulator on Cadillac Deville?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html ---------------
Hummer H2 Door Panel Removal? http://technoanswers.blogspot.in/2012/07/hummer-h2-door-panel-removal.html

-------
Hummer H2: How to remove Front Door panel? http://www.howtobyme.blogspot.com/2012/07/hummer-h2-how-to-remove-front-door.html

--------------
2009 Hummer H2 Door Panel Removal

http://schematicsdiagram.blogspot.in/2012/07/2009-hummer-h2-door-panel-removal.html

-----------

how to remove window motor on driver side door panel on 1994 Oldsmobile Cutlass Ciera
http://technoanswers.blogspot.com/2011/08/how-to-remove-window-motor-on-driver.html

------------

How to remove door panel, door window motor and regulator on 1991 cavalier?
http://technoanswers.blogspot.com/2011/05/how-to-remove-door-panel-door-window.html

-------------
how to remove rear window inner panel on Hyundai Elantra?
http://technoanswers.blogspot.com/2011/05/how-to-remove-rear-window-inner-panel.html

------------
ford explorer window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html

------------
These details will help.

Thanks,.

Nov 23, 2012 | 2002 Cadillac Deville

1 Answer

NEED TO REMOVE DOOR PANEL ON A 2004 CHEVY AVEO


Click the link below:-----Door Panel Removal?

--------
How to remove the door panel to install a new window regulator?
http://howtobyme.blogspot.com/2011/08/how-to-remove-door-panel-to-install-new.html


---------
Hummer H2 Door Panel Removal? http://technoanswers.blogspot.in/2012/07/hummer-h2-door-panel-removal.html Hummer H2: How to remove Front Door panel? http://www.howtobyme.blogspot.com/2012/07/hummer-h2-how-to-remove-front-door.html 2009 Hummer H2 Door Panel Removal http://schematicsdiagram.blogspot.in/2012/07/2009-hummer-h2-door-panel-removal.html

-----------
how to remove window motor on driver side door panel?
http://technoanswers.blogspot.com/2011/08/how-to-remove-window-motor-on-driver.html


-----------
ford explorer window motor, regulator and door panel removal?
http://technoanswers.blogspot.com/2011/02/ford-explorer-window-motor-regulator.html


---------
Keep updated for more help.

Nov 19, 2012 | Cars & Trucks

1 Answer

Remove door panel


Expedition Trim Panel Removal

NOTE The door glass must be completely raised.
  1. Remove the window control switch plate.
  2. Remove the door handle bezel.
    WARNING To avoid damage to the door trim panel, lift the door trim panel by pulling directly upward on the armrest to disengage the panel clips.
  3. Remove the two bolts and three screws, and remove the door trim panel.
  4. Remove the finish cover to access the two center screws.
  5. Disconnect the electrical connectors.

    zjlimited_454.jpg

    Fig. Expedition - Trim Panel Screws shown

  6. Remove the door handle bezel.
  7. Use service notch.
    WARNING To avoid damage to the door trim panel, lift the door trim panel by pulling directly upward on the armrest to disengage the panel clips.
  8. Remove the two bolts and three screws, and remove the door trim panel.
  9. Disconnect the electrical connectors.

    zjlimited_455.jpg

    Fig. Navigator - Trim Panel Screws shown

  10. Position the water shield aside.
  11. If equipped, disconnect the lock cylinder rod.
  12. Disconnect the exterior door handle actuating rod.
  13. Remove the bolts and position the front door latch aside.
  14. Disconnect the electrical connectors.
  15. Release the interior door handle cable and remove the front door latch.
  16. Position the cable cover aside.
  17. Release the conduit and the interior door handle cable.
  18. Release the locking tab and remove the front door lock actuator.
  19. To install, reverse the removal procedure and note the following:
    1. Tighten the door latch screws to 80 inch. lbs. (9 Nm).

This procedure is followed to check and fix door locks.

Hope helps.

Jan 12, 2011 | 2001 Ford Expedition

1 Answer

How do i car door panels safely


  1. Remove the cover behind the inside door handle.
  2. Remove the screw from the bottom of the pull cup retaining the front door trim panel to the front door.
  3. Remove the two screws retaining the sail panel/speaker grille assembly and remove the panel/grille from the door.
  4. Remove the three screws retaining the front door trim panel to the front door.

Do not attempt to remove more than one pushpin at a time.

  1. Use a suitable tool to remove the pushpins from the door.
  2. Carefully lift the door panel away from the door.
  3. Detach the electrical connectors as necessary and remove the panel from the door.

To install:

  1. Installation is the reverse of removal.
Door Panel

This procedure applies to both the front and rear door panels.


// // 0) preLoad.src = ctl00_cphLeft_chRepairTreeNav_tvTOC_ImageArray[i]; } ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.lastIndex = 30; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.populateLog = theForm.elements['ctl00_cphLeft_chRepairTreeNav_tvTOC_PopulateLog']; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.treeViewID = 'ctl00$cphLeft$chRepairTreeNav$tvTOC'; ctl00_cphLeft_chRepairTreeNav_tvTOC_Data.name = 'ctl00_cphLeft_chRepairTreeNav_tvTOC_Data'; //]]> var _strTreeScrollHidName = 'ctl00_hidTreeScrollPos'; c17hydro_23.gif

Remove the cover from behind the inside door handle by gently pulling it out to release the retaining tabs


c17hydro_24.gif

Remove the pull cup retaining screw cover and...



c17hydro_25.gif

... remove the retaining screw from the cup and lift the cup straight up out of the door panel



c17hydro_26.gif

Remove the two sail panel/speaker grille retaining screws and...



c17hydro_27.gif

... remove the panel/grille from the door



c17hydro_28.gif

The door panel is retained to the door by 11 retaining clips



c17hydro_29.gif

Carefully lift the door panel off of the door and...



c17hydro_30.gif

... detach the electrical connectors from the switches and remove the panel from the vehicle

Nov 13, 2010 | 1996 Ford Taurus

1 Answer

1999 chevrolet suburban: door panel removal


hello here is the instructions for removing the door panel.

  • Remove the door handle bezel.
  • Remove the window handle,.
  • Remove the power accessory switch panel.
  • Remove the trim panel upper extension
  • Remove the trim panel screws.




  • Remove the courtesy light,
  • Remove door panel screws.
  • Remove the trim panel from the door, carefully sliding the trim panel up to release the retainers from the door.
  • Remove the speaker wire.
  • 3470484.gif

    Jan 23, 2010 | 1999 GMC Suburban

    3 Answers

    How do you take the door panels off?


    How To Install Replace Remove Front Door Panel Ford Focus 00-05 1AAuto.com


    Nov 08, 2009 | 2001 Ford Focus

    2 Answers

    Where can I read, for free, how to remove the drivers door panel and remove and replace the window regulator. I see these questions on this site but there are NO ANSWERS. What's with that? 1998 Cadillac...


    GM Cadillac Deville_Fleetwood_ELD_Seville 1990-1998

    Door Panels - REMOVAL & INSTALLATION

    FRONT DOOR

    7b8295a.jpg

    Fig. Front door panel-1990-91 Deville and Fleetwood

    f86aba7.jpg

    Fig. Front door panel-1992-98 Deville and Fleetwood

    ea63dcb.jpg

    Fig. Carefully pry up the power window switchplate and . . .

    5e6e08a.jpg

    Fig. . . . gently remove it from the door panel

    42aebbe.jpg

    Fig. Remove the door pull strap retaining screw covers by gently prying them off

    342330d.jpg

    Fig. Remove the door pull strap retaining screws

    b4ba006.jpg

    Fig. Gently pull the inside door handle panel down and . . .

    6a6b4b0.jpg

    Fig. . . . release the rod from the handle

    435710f.jpg

    Fig. Carefully lift up the door panel to release the . . .

    aa0d077.jpg

    Fig. . . . retaining pegs on the door panel

    9275228.jpg

    Fig. Do not pull the panel too far away from the door, as some components still have wiring harness connected

    a232e57.jpg

    Fig. Detach any necessary wiring connectors and remove the door panel from the vehicle
    1. Disconnect the negative battery cable.
    2. Insert a flat-bladed tool between the door panel and the rear edge of the power window switch plate to disengage the retainer from the panel.
    3. Slide the power window switch plate forward, then label and detach the wiring connectors.
    4. Remove the power door lock switch plate retaining screw. Remove the switch plate and detach the wiring connector.
    5. Remove the pull handle retaining screws.
    6. Using a thin-bladed tool, carefully pry the courtesy lamp lenses off. Remove the courtesy lamp bulb.
    7. Pinch the courtesy lamp retainers and pull out the lamp socket holder. Detach the courtesy lamp wiring connector.
    8. Remove the door panel retaining screws.
    9. Using tool J-2459B or equivalent, disengage the door panel fasteners from the holes in the door. Detach any remaining wiring connectors and remove the door panel.
    To install:
    1. Position the door panel close to the door and attach the wiring connectors.
    2. Align the door panel fasteners with the holes in the door. Push in on the door panel to install it to the door.
    3. Install the door panel and pull handle retaining screws.
    4. Install the courtesy lamps and switch plates.
    5. Connect the negative battery cable.

    I really hope help you with this (remember rated it) Good luck.

    Oct 12, 2009 | 2001 Cadillac DeVille

    1 Answer

    How to remove the door panel on a 96 Ford Thunderbird?


    Carefully pull front door trim panel finish panel away from front door trim panel.
    Disconnect wires from front door lock switches, outside rear view mirror controls and window regulator control switches, if equipped. Remove front door trim panel finish panel.
    Remove front door trim panel retaining screw through front door trim panel finish panel opening.
    Remove interior lamp lens cover.
    Remove screw through interior lamp opening.
    Slide front door trim panel upward to disengage hooks.
    Rotate top of front door trim panel away from front door and lift bottom hooks from front door.
    Disconnect window regulator jumper wire
    Remove front door trim panel.

    Feb 21, 2009 | 1996 Ford Thunderbird LX

    1 Answer

    Remove right rear door panel


    1. Remove the rear door power window/power door lock switch
    2. Remove the door handle bezel. Remove the door trim panel screw located behind the door handle bezel.
    3. Remove the door trim panel screws located by the armrest handle.
    4. Remove the door trim panel using J 38778.
    5. Disconnect the electrical connectors.
    6. Remove the door trim panel from the door.
    INSTALLATION PROCEDURE

    IMPORTANT: Discard the old door trim panel retainers and replace with new retainers before installing the trim panel

    1. Install new trim panel retainers to the rear door trim panel.
    2. Connect the electrical connectors.
    3. Align the door trim panel retainers to the door.
    4. Press the door trim panel at the retainer locations until the retainers are fully seated.
    5. Install the trim panel screws. Tighten Tighten the door trim panel screws to 2 N.m(18 lb in) .
    6. Install the power window/power door lock switch


    Nov 04, 2008 | 1998 Oldsmobile Intrigue

    Not finding what you are looking for?
    2011 Mazda BT-50 L-Cab Logo

    Related Topics:

    172 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Mazda Experts

    yadayada
    yadayada

    Level 3 Expert

    75005 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7710 Answers

    Are you a Mazda Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...