Question about Ford Escape
Posted by Anonymous on
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
one thing to keep in mind that even though the vehicle is new you can still have major engine issues, because of the bearing material may have been bad at production.taking this in account any part on a vehicle can fail prematurely either because of poor insatllation or improper manufacturing. As far as oil filters are concerned bthe odds of mechanic installing the wrong filter are slim to none.the oil pressure sending unit only senses that here is oil flowing through it. it doesn't set the light off unless there is absolutely no pressure at all the only way to see the pressure is to have a gauge. oil prssure should be abot 45 psi at 2000 rpms. the only way a filter would effect oil pressure is if it was completely clogged. It would take a great deal of coolant in the oil to ruin a set of bearings and before that happens your vehicle would not run very well and you would notice a great amount of white smoke out the exaust. this would indicated either a blown head gasket.cracked head or a cracked block. you never mentioned what they found in the anaylasis of the oil. I presume that your vehicle is still under warrenty on the powertrain. I would suggest that you have the dealership check your oil pump out. every vehicle will have a small amount of metalic residue in the oil. large shavings and chunks of metal would be a worry. please rate this thanks.
Posted on Sep 25, 2008
it will be near the oil filter, on the side of the engine block. A large brass "nut" with a wire attached to it.
Posted on Oct 05, 2009
Testimonial: "thank you was helpful in solving my problem. issue resolved "
Should be located close to the oil filter. It will screw in like a spark plug. It has a harness plug. Easy to change, save yourself $70 in labor. You will need a fairly large wrench to remove
Posted on Jan 03, 2010
Tips for a great answer:
Sep 26, 2016 | 2002 Ford Escape
Sep 17, 2016 | 2002 Ford Escape
Jul 04, 2016 | Ford Cars & Trucks
Feb 25, 2015 | 2003 Ford Escape
Aug 15, 2014 | Cars & Trucks
Jan 17, 2011 | 2001 Ford Escape
Oct 18, 2010 | 2004 Ford Escape
Feb 22, 2009 | 2001 Ford Escape
May 22, 2018 | Ford Cars & Trucks
46 people viewed this question
Usually answered in minutes!