Question about 1992 Honda Accord

1 Answer

Cluckin in front end

When ever i take off , shift gears , hit he brake or hit bumps i hear a loud cluck from the front driver side tire and my brake light is on

Posted by on

  • newpimp07 May 08, 2009

    thanx tim i appreciate it , i got plenty of brake fluid doe



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 234 Answers

The noise from the front end is probably a bad ball joint. It is possible that it is a tie rod end also.

If the car is supported on jack stands, you should be able to move the wheel around and see where the problem is.

The brake light could be that you are low on brake fluid or there is a problem with your front or rear brakes.

You should have this looked at right away. It is possible that you only have front or rear brakes working at this time and if the other fails, your vehicle will not stop.

If you need more help, post a comment and I will get back to you.



Posted on May 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Loud bang when I hit a bump with my foot on the break. No sound at all if I hit a bump without my foot on the brake. What is this?

indicates that lower suspension rubbers are broken and should be inspected by an accredited front suspension professional service center

Aug 09, 2017 | 2005 Nissan Murano

2 Answers

I need help with my 1994 pontaic grand am. I just bought the car and it has a terrible clunking noise in the front mostly when I turn the wheel. What could this be? Could it be tie rod, cv joints,shocks or...

Jack up the wheel and see if it has play up and down and left and right. Have someone watch inboard as you move it. A bad cluck will usually show itself.

Jan 12, 2011 | 1994 Volkswagen Jetta

1 Answer

I have a 2003 ford explorer v6 4wd... the wife had a flat and the nieghbor changed it. ok.... she didnt know the emgerency brake was applied and drove about 10 miles. now i t could be a coincidence with...

Where was the flat? If the flat was on the Front end, the Spare may be bad or the Lugbolts are loose. If the front hit something hard enough to blow a tire, there could be related front damage. But a nail would not damage the frontend, just the tire.

You should check the E brakeshoes, but really there is a possibility the E brakes would have messed up once they were used. The parts back there could be rusty anyway and would not reset if the E brakes were off. Sounds like the neighbor did a favor and did right by setting the E brake when jacking the Vehicle.

There may be extra noise if the Spare was hung back under the vehicle. As the tire is flat it will not tuck in tight without air in it.

Jul 18, 2010 | 2003 Ford Explorer

2 Answers

Front driver side suspension knock over bumps

See if you can bounce car and replicate the noise. If you can, you should be able to find it, and put your hand on it. Stabilizer bushing are a place to look, both at the lower a arm and on the frame. If you narrow it down to the strut, it will need to be replaced. The front trans mount also goes bad, try putting it in drive with your foot on the brake and give it some gas and see if the engine moves an excessive amount.

Nov 23, 2009 | 1992 Buick Regal

1 Answer

Front end loud noise like an old bed clunk, honda crv 2000

its probably your sway bar end links, I had the same problem, I replaced both sides and the bushings and no more clunk noise

Apr 26, 2009 | Honda CR-V Cars & Trucks

2 Answers

A clunking on passengers side at rear

universal joints clunk,is it in the rear end then maybe it is the rear kinda need to be more specific if this information doesn't help

Apr 23, 2009 | 1999 GMC Jimmy

7 Answers

Loud front end noise over low-speed city street bumps.

I have the same problem but others said that replacing the $25 sway bar bushings fixed the problem. This solution helped several owners so it's worth changing.

Oct 30, 2008 | 2005 Dodge Magnum

Not finding what you are looking for?
1992 Honda Accord Logo

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

76051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides