Question about 2011 Mitsubishi Endeavor

Open Question

Can't add brake fluid to mitsubishi endeavor 2011

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Technopro
  • 243 Answers

SOURCE: Need a compatible transmission fluid

Basically you can use Dextron/ATF SPIII M but MMC recommends Diaqueen as it has been engineered for them and for warranty purposes as well.
Cheers

Posted on Apr 23, 2009

  • 4088 Answers

SOURCE: What are the possible causes for spongy brakes in

Air in the fluid lines is the cause unless something is bending. Bleed the brake lines--longest one first and progress to the nearest. Keep fluid topped up in the master cylinder as this progresses. A two person process--one pumping the brakes several times and then hold pressure while the other person cracks the bleed screw slightly until no air spits out. Close the screw if you need another pump. Make sure you are using the correct clean fluid--don't reuse the old discharged fluid.

Posted on Jul 16, 2009

steve_e_uk
  • 1675 Answers

SOURCE: Mitsubishi Endeavor Anti brake light stays on

hi this maybe due to the brake switch being either stuck in or the switch itself has broken, if you look under your dashboard where the brake peddle is, you should see a black or white plastic thing being held to a small bracket, there should be a little plunger sticking out, if not, unplug the switch ( should be a 2 wire plug ) then undo the nut holding it in the bracket, and have a look and see if the plunger is broken or just stuck in, it could have some dirt holding it in place, just pull it back out and lubricate with a light oil, obviously if it is broken just purchase a new one....hope this helps please vote thanks

Posted on Jul 28, 2010

  • 977 Answers

SOURCE: mitsubishi 2004 endeavor. Transmission appears to

if the fluid level is low it can cause problems with gear shifting, top up the fluid level & see if that makes a difference.......hope this helps......cheers.

Posted on Aug 01, 2011

klayman89
  • 22 Answers

SOURCE: how many quarts transmision fluid does 2004 mitsubishi endeavor hold

I'm thinking about 3.5 quarts.

Posted on May 20, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove mitsubishi endeavor brake lights


Here is how to remove and replace brake lights
remove-mitsubishi-endeavor-brake-lights-d1rhjkwrz415p4rrmvt2ndcf-5-1.jpg

remove-mitsubishi-endeavor-brake-lights-d1rhjkwrz415p4rrmvt2ndcf-5-3.jpg

Apr 29, 2012 | 2004 Mitsubishi Endeavor

1 Answer

Mitsubishi 2004 endeavor. Transmission appears to be jumping. The fluid level is low?


if the fluid level is low it can cause problems with gear shifting, top up the fluid level & see if that makes a difference.......hope this helps......cheers.

Aug 01, 2011 | 2004 Mitsubishi Endeavor

2 Answers

2004 Mitsubishi Endeavor- Running ragged, not staying cranked, never been tuned up for 150,000 mi.,


After 150,000 mile I think she has earned a tune up, maybe even new filters...

Mar 22, 2011 | 2005 Mitsubishi Endeavor

1 Answer

HAVE A 2006 MITSUBISHI ENDEAVOR I GOT A LIGHT THAT LOOKS LIKE A HORSE SHOE WITH AN EXCLAMATION POINT. CAN YOU PLEASE LET ME KNOW WHAT THAT IS I DID NOT GET AN OWNERS MANUAL WITH THE CAR.


This is not a good warning light as it relates to your Braking system !!!

Brake system warning light

brake_fluid_light_72.jpg
This light will remain illuminated when the handbrake is engaged. Illumination after releasing the handbrake may indicate low brake fluid level (MUST CHECK THIS IMMEDIATELY AND RECTIFY).

Hope the information is useful ... be extremely careful and attend to this warning immediately if it is still on with your handbrake off and brake fluid top up!

Sep 24, 2010 | 2005 Mitsubishi Endeavor

1 Answer

When i start my 2008 endeavour,the brake light wont go off. Then when i start to drive, the traction icon comes on. Any solutions?


There are a few items to check.
1) Brake fluid level
2) Brake pads
3) Wheel sensors and wiring (these send data to ABS and traction control)

If all the braking system seems to be fine then I would guess a wheel sensor is faulty which would make the warning lights come on.

Mar 30, 2010 | 2008 Mitsubishi Endeavor

1 Answer

How can u check to see if u have enough transmision fluid ??


Does the truck have a transmission dip stick? Should look like the oil one, but be near the back of the engine and also be a different color. Once you find it, start the truck, put it in neutral and set the park brake, then check the fluid level.

Mar 15, 2010 | 2004 Mitsubishi Endeavor

2 Answers

2004 Mitsubishi endeavor on cold mornings has a delay shifting into gear. I have already replaced transmission once what is the problem?


let the car warm up for 5 to 10 min before takeing off
the trans fluid gets thick when it gets colder also have trans filter and fluid changed every 30,000 miles

Nov 17, 2009 | 2004 Mitsubishi Endeavor

1 Answer

What are the possible causes for spongy brakes in a mitsubishi 2004 endeavor


Air in the fluid lines is the cause unless something is bending. Bleed the brake lines--longest one first and progress to the nearest. Keep fluid topped up in the master cylinder as this progresses. A two person process--one pumping the brakes several times and then hold pressure while the other person cracks the bleed screw slightly until no air spits out. Close the screw if you need another pump. Make sure you are using the correct clean fluid--don't reuse the old discharged fluid.

Jul 16, 2009 | 2004 Mitsubishi Endeavor

Not finding what you are looking for?
2011 Mitsubishi Endeavor Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...