Question about Toyota Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Blend door not working.
The bleed door controls air temp not where it comes out, dash, floor, defroster, this is most likely a mode control switch problem, that switch is on the ac control head.
Posted on Sep 23, 2008
SOURCE: Blend door
ok first put you front seat down and back raise steering wheel . now lay on you back with you head in the drivers floor board. look up see 2 screws remove them and the panel they hold on . look to left main wire harness needs to be moved to the right , up and behind it is th blend actuator 7/32 socket to remove it then manually turn the white peg , total labor 30 min
Posted on Dec 15, 2008
I recently did mine, I hear you can do it without taking the entire dash apart but I had no luck with it myself. I have to get ready for work but, on mine it was located down and to the left of the radio. its a white box...are you hearing a clicking noise or something? I had to roll the entire dash back and it was still a major pain getting it out.
Posted on Dec 07, 2009
Tips for a great answer:
Jul 05, 2017 | Toyota Cars & Trucks
Jan 22, 2016 | 2004 Toyota Solara
Feb 17, 2015 | 2010 Dodge Nitro
Temperature Control Blend Door Failure No Heat
In all modern cars there is a tiny DC electric motor driven gear drive that moves a plastic door that blends heated and cooled air from the AC and the heater core, this is called (interestedly enough) the air temperature control blend door actuator. The motor that moves this door fails because the door starts sticking from warping, most common complaint is no heat but it can be no AC as well. To replace these parts (blend door and blend door actuator) you must remove the entire dash from the car. Always have this problem confirmed by a dealer or qualified repair shop as it is a very expensive repair.
Nov 01, 2012 | Cars & Trucks
Nov 26, 2011 | 2006 Kia Amanti
Fig. Remove the floor air outlet duct extension (1) from the floor duct (2)
Disconnect the electrical connection at the blend door actuator (#10 in pic below).
Fig. Blend door actuator and related components
Remove the blend door actuator mounting screws from the HVAC module.
Remove the blend door actuator as an assembly with the actuator cam.
Fig. Remove the blend door actuator mounting screws from the HVAC module
Picture of actuator:
Dec 07, 2010 | 2004 Chevrolet Avalanche
Oct 18, 2009 | 1999 Chevrolet Silverado 1500
Sep 09, 2009 | 1998 Cadillac Seville
Nov 27, 2008 | 2001 Chevrolet Silverado
66 people viewed this question
Usually answered in minutes!