Question about 1995 Nissan 200SX
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
what you need to check is are you getting any spark at the spark plugs, to do this, unplug one of your spark plug wires at the spark plug, find a screwdriver that will fit inside the spark plug wire housing, make sure your screwdriver has a insulated or non conductive handle, hold the steel shank of the screwdriver about 1/8"-1/4" from your exhaust manifold and have someone crank the engine, just for a second or two, look to see if there is spark jumping from the screwdriver shank to the manifold, if there is, then you eclectically is probably OK.
second you need to check your fuel, you really should have a fuel pressure gage but for now lets just do a preliminary check.
find your fuel line going to the intake manifold (steel tubing 5/16"-3/8" diameter) you need to disconnect the line somewhere between the fuel pump and the intake manifold. you'll need a can.
hold the can under the fuel line so fuel doesn't go everywhere, then have someone crank the engine, if it is an electric fuel pump you wont need any help, all you'll need to do is turn the key on and it should start pumping fuel, the fuel discharge should be very noticeable, it will really start coming out fast and furious.
If you don't have fuel coming from the line or very little, your fuel pump or fuel filter is probably bad.
alot of vehicles will stop running on just a plugged up fuel filter, but normally it will give you some warning, like your engine will start to miss or loss of power on hill or accelerations. If you haven't experienced any problems until now, i doubt its the filter.
see if you can check those two items out and let me know what you find
buy the way, alot of the newer vehicles on the road today use special connection clips to connect fuel lines, you may need a tool to get the line disconnected, there little plastic tools in different sizes depending on the size of your fuel line. if you need one and your doing this yourself, borrow one or at the automotive house ask for a fuel line quick disconnect tool. i don't think there alot of money. make sure your car isn't out of gas.
good luck and let me know how you make out.
would appreciate your feedback, please
Posted on May 23, 2009
For the 1995 Nissan Quest 3.0L SOHC V6:
Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
Posted on Apr 18, 2010
check fuel pump, fuel pump fuse, distributor,and ignition coil please. then you will need to check crank position sensor.(to do this you need to find factory service manual)
Posted on Nov 23, 2011
Tips for a great answer:
Mar 10, 2014 | Nissan 200SX Cars & Trucks
Jun 12, 2011 | Nissan Pickup Cars & Trucks
Jul 25, 2010 | 1995 Nissan 200SX
Jul 03, 2010 | 1995 Nissan 200SX
Jun 07, 2010 | 1995 Nissan 200SX
Apr 16, 2010 | 1995 Nissan Quest
Apr 30, 2009 | 1995 Nissan 200SX
29 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: