Question about BMW X3 Series

Open Question

Engine control fuse keeps blowing - X3 Series BMW Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

emissionwiz
  • 75758 Answers

SOURCE: Fuse Keeps Blowing

Replace the lighter assembly, it is shorted, this is very common.

Posted on Dec 11, 2008

  • 158 Answers

SOURCE: the engin control fuse keeps blowing on my 2005

your fuelpump could be causing the fuse to blow as it may be seizing up

Posted on Apr 19, 2009

CarMech97
  • 427 Answers

SOURCE: blowing engine control fuse on 94 grand cherokee

You might have a wire from the engine control circuit that has rubbed through on the engine block somewhere. Do a visual inspection of the engine wiring, and look closely for any damaged insulation. I have seen a problem like this before. Good Luck!

Posted on Sep 28, 2009

sandy_j24
  • 7 Answers

SOURCE: 20 amp fuse keeps blowing engine won't start, fuse

I am a mechanic,i had that same problem where my engine 20amp fuse were blowing....i fixed it...problem were a broken wire in the harnace on the side of the cylinder head....i made over $200 on that job...yahhh

Posted on Nov 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine control fuse keeps blowing pontiac gto


check o2 sensor wires make sure their not melted

Apr 07, 2013 | 2004 Pontiac GTO

1 Answer

What causes fuse #5c in my 1996 buick park ave. to keep blowing?


A fuse that keeps blowing is probably the result of a wire that is grounded unintentionally. This would be the result of an exposed power wire touching the engine or body and grounding out. This would cause an excessive power draw and blow the fuse. The other option is that the fuse was lower amps than the original one. check the fuse diagram to see if the amps match up.

May 29, 2012 | Buick Park Avenue Cars & Trucks

1 Answer

I have a 1994 Dodge Intrepid with a 3.5.The 20 amp engine control fuse keeps blowing.We have replaced the starter and the fuel pump.This did not solve the problem.When the fuse blows the engine will still...


The fuse that keeps blowing is related to your ignition. Get the faults read at a shop and find what is triggering fault and that will lead you to your problem. It's a whole lot easier than throwing parts at it, and cheaper.

Jan 07, 2011 | Dodge Intrepid Cars & Trucks

2 Answers

99 vw jettal 2.0 gas fuse 29 15amp fuse keeps blowing-no spark unpluged coil and fuse keeps blowing. help please


Thats the fuse for the ECU, engine control module, and is a 15amp for gas 2.0. i would locate the ECU which is under the center of the plenum in the engine compartment and disconnect the long plug. Check for green discoloration on the multipin connector. Sometimes moisture will get in there and short some of the pins together. Leave ECU unplugged and replace the fuse. If it still blows cause is between the fuse and the ECU.

Dec 27, 2010 | 1999 Volkswagen Jetta

1 Answer

CAR KEEPS BLOWING 20 AMP ENGINE CONTROLLER FUSE??


What keeps blowing my control fuse on my 1997 Chrysler LHS

Sep 11, 2010 | 1997 Chrysler LHS

1 Answer

Blowing engine control fuse on 94 grand cherokee


You might have a wire from the engine control circuit that has rubbed through on the engine block somewhere. Do a visual inspection of the engine wiring, and look closely for any damaged insulation. I have seen a problem like this before. Good Luck!

Sep 28, 2009 | 1994 Jeep Grand Cherokee

2 Answers

I have a 2000 Hyundai Accent that keeps blowing the ECU 1 Fuse. I can change it one time and it will last for three weeks then before you know it I can change it 5 times in one day. What does the ECU 1...


The ECM1 fuse blowing usually indicates that the fuel pump wires shorted inside the tank. If you drop the tank and remove the module, you will probably find the insulation burned off the gray pump wire.

Aug 25, 2009 | 2000 Hyundai Elantra

1 Answer

The engin control fuse keeps blowing on my 2005


your fuelpump could be causing the fuse to blow as it may be seizing up

Apr 18, 2009 | 2005 Ford Focus

1 Answer

Fuse Keeps Blowing


Replace the lighter assembly, it is shorted, this is very common.

Nov 26, 2008 | 1991 Lexus LS 400

1 Answer

Blowing 30 amp engine control fuse.


You say it eventually allows you to put new fuse in, do you mean when it sits for a while, a new fuse won't blow, but if it blows and you immediately replace it, it blows again instantly?

Sep 05, 2008 | 1997 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...