Question about 2010 Toyota Corolla LE

Open Question

2010 coralla and the reqd maintenance light keeps blinking initially

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ZJLimited
  • 17970 Answers

SOURCE: How do I turn off the Maintenance REQD light on my

Try this:

  • Put your vehicle in Park and turn the ignition key to the off position.
  • Locate the button used to toggle between your trip odometer, which should be near the speedometer display. Press the button and hold it down.
  • Turn your vehicle's ignition to the acc setting while holding the button. Do not crank the vehicle. Hold the position for five seconds and turn the ignition key off. Release the button. The maintenance light will be reset and will illuminate again the next time service is due.
Hope helped.

Posted on Apr 09, 2010

Ad
  • 12 Answers

SOURCE: Maintenance Required Light

Its for an oil change and the way you reset it is put the trip on odometer hold the trip odometer button and turn the key to the on position and lines will blink in the place the numbers should be then it will go off

Posted on Apr 10, 2010

Testimonial: "It Worked---Thank You"

  • 151 Answers

SOURCE: how to reset maintenance reqd. light on 2005

First push the trip odometer reset button hold it in then turn the key to the on position but don't start the vehicle you will see like 5 or 6 little lines like this ------ where the mileasge and trip mileage should be you will have to hold the trip reset button till all the lines are gone which takes about 5 seconds then once all the lines are gone it is reset.

Posted on Apr 26, 2010

  • 34 Answers

SOURCE: maintenance reqd light came on at 44,000

It's probably your regular scheduled maintenance (oil change) light. Here's how you can reset that:

1. Turn the key to "on" so the electrical system is fired up (but engine is not running)

2. Set trip planner to "A" trip.

3. Turn key off (no electrical)

4. Hold down trip button, then turn key to "on" so the electrical system is fired up (but engine is not running).

5. "Maint Req" light will blink several times and then go off.

Good luck!

Posted on Dec 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fixing a broken dip stick tube on a 2010 Toyota coralla


Use a properly sized vacuum hose long enough to keep any leaks from appearing.

Mar 19, 2017 | 2010 Toyota Corolla

1 Answer

Maintenance reqd light on


With the key off, on your instrument cluster, hold in the dial that resets the trip odometer, turn the ket to the on position. Keep holding the dial down for about 10-15 seconds and the maintenance light should eventually turn off.

Oct 26, 2013 | 2003 Acura 3.2TL

1 Answer

How do I shut off the Maintenance light without taking it to a dealer?


Turn ignition to "ACC" and press the odometer button until the display reads actual mileage (not Trip A or B).
Turn ignition off.
Hold the same button down that you used in step 1.
While holding the button, turn ignition to 'ON'.
The 'Maint Reqd' light should blink and go out.
Done!

Dec 08, 2010 | 2005 Toyota Highlander

1 Answer

Maintenance reqd light came on at 44,000 miles...why?


It's probably your regular scheduled maintenance (oil change) light. Here's how you can reset that:

1. Turn the key to "on" so the electrical system is fired up (but engine is not running)

2. Set trip planner to "A" trip.

3. Turn key off (no electrical)

4. Hold down trip button, then turn key to "on" so the electrical system is fired up (but engine is not running).

5. "Maint Req" light will blink several times and then go off.

Good luck!

Nov 15, 2010 | 2008 Toyota Camry

1 Answer

Maintenance Required Light


Its for an oil change and the way you reset it is put the trip on odometer hold the trip odometer button and turn the key to the on position and lines will blink in the place the numbers should be then it will go off

Apr 10, 2010 | 2006 Toyota Corolla

1 Answer

Main reop light in dash


Hello, and welcome to FixYa.

The 'Maint Reqd' light indicates that you are due for an oil change. It will blink 4,500 miles since the light was reset at your last oil change, and stay on steady after 5,000 miles.

If you recently had an oil change, all you need to do is reset your maintenance reqd lamp. The procedure is here on this site inthe 'tips and tricks' section, and it is also in your owner's manual.

Feb 22, 2010 | 2004 Toyota Camry

1 Answer

TOYOTA SIENNA MAINT REQD LITE CAME ON AFTER SCHEDULE MAINTANANCE


If the dealer/mechanic did the service early the light will come on when service is DUE. Go back to him and have it turned off. Search the web someone may have the procedure posted. Usually simple. Google "Toyota service light reset" or "Toyota Maintence light reset" Try this one
  1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
  2. Turn the car off (ignition key to the OFF position).
  3. Push in AND HOLD the button/knob that switches the odometer
  4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
  5. Release the odometer button/knob.
  6. Turn key to OFF position.
  7. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

Feb 05, 2010 | 2004 Toyota Sienna

1 Answer

What service(s) does a 2004 rav4 need at 100,000 miles?


This is Toyota's scheduled maintenance for the RAV4 at 100,000 miles...

Replace engine oil and oil filter 1
Rotate tires
Replace engine coolant 2
Visually inspect brake linings/drums and brake pads/discs
Applicable Footnotes:
1) Reset the oil replacement reminder (“MAINT REQD”) light after replacing engine oil, if vehicle is equipped with this light.
2) Initial replacement at 100,000 miles/120 months. Replace every 50,000 miles/60 months thereafter. Refer to "Engine Coolant" in the "Explanation of Maintenance Items" section in the back of this guide for more information.

Nov 30, 2009 | 2004 Toyota RAV4

1 Answer

How to reset maint req lite on a 2005 sienna


Reset the "MAINT REQD" Light on Toyota Sienna:
  1. With the car started (ignition on), set the LCD odometer readout to total mileage (not trip A or B).
  2. Turn the car off (ignition key to the OFF position).
  3. Push in AND HOLD the button/knob that switches the odometer
  4. Turn key to ON position without starting the car. You will notice the maintenance light blink and go out.
  5. Release the odometer button/knob.
  6. Turn key to OFF position.
  7. That's it! The "MAINT REQD" light has been reset to warn you to change your oil in another 5,000 or 7,500 miles or so.

Hope helped with this (remember rated this help) Good luck.

Nov 18, 2009 | 2006 Toyota Sienna

2 Answers

Need to reset the "Maintenance Required" light on the dashboard


Revised procedure (for Highlander)

Turn ignition key to 'ON' and press the odometer button until the display reads actual mileage... not Trip A or B.

Turn ignition key to OFF.

Hold in the same button you used in step 1.

While holding the button in, turn ignition key to 'ON'.

The 'Maint Reqd' light should blink and go out.

May 09, 2009 | Toyota Sienna Cars & Trucks

Not finding what you are looking for?
2010 Toyota Corolla LE Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

77201 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8743 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...