Question about Hyundai Sonata

Open Question

How to remove spark plugs 2003 Hyundai sonata 2.7 liter v6

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 54 Answers

SOURCE: change spark plugs 2001 4 cyl hyundai sonata

You change One spark plug, and One wire at a time. Do you know where your timing belt is? If not, its on either the right or left side of the engine. There is a covor to the timing belt. You take the First plug that is closest to that belt. Then you work your way to the next closest all the way to the last one. Remember, you have to do ONE at a time.

Posted on Nov 30, 2008

arcman-1
  • 1 Answer

SOURCE: change sparks plugs on 06 hyundai sonata v6

You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

Posted on Jul 08, 2009

  • 11 Answers

SOURCE: how to change spark plugs in a 2.7 v6 hyundai

the rear plugs can only be accessed by removing the fuel/air intake plenum. If you're not familiar with the procedure, you might want to pay a mechanic to do it right.

Posted on Aug 18, 2009

  • 158 Answers

SOURCE: spark plug wiring diagram for gm 3.4 liter v6

http://autorepair.about.com/od/enginefiringorders1/Engine_Firing_Orders.htm

Posted on Aug 30, 2009

ghost45
  • 1280 Answers

SOURCE: Locating and changing spark plugs on 2007 Hyundai Sonata 4 cylinder

They are directly below the coil packs (10mm bolts).


a73d0bb.jpg

Posted on Oct 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How long is the number two spark plug wire on a 2003 Hyundai sonata


Really if only that wire has been removed , check the length with the new set and use the one that is the closest match .

Nov 27, 2016 | Hyundai Cars & Trucks

1 Answer

Need spark plug firing order for 1997 hyundai sonata


1997 Hyundai Sonata GL 2.0 liter DOHC L4

zjlimited_805.gif


1997 Hyundai Sonata GL 3.0 liter SOHC V-6

zjlimited_806.gif


I hope this helps, abd just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment. Have a nice weekend and thanks for using FixYa.

Jose.

Oct 18, 2011 | 1997 Hyundai Sonata

2 Answers

How do you change spark plugs in a 2004 hyundia sonata


It depends on which engine is in the vehicle. The 2004 Sonata came with two possible powertrains -- the 2.4 Lit L4, and the 2.7 Lit V6.

On the 4 cylinder engine, there are two coil packs and two ignition wires, Below each coil pack is a spark plug (#2 and #4 cylinders). The wire from # 2 coil pack goes to #3 spark plug, and the wire from #4 coil pack goes to #1 spark plug.

Photo:

ghost45_15.jpg
Now the 2.7 Lit V6 requires you remove the surge tank (intake manifold) in order to access the spark plugs & wires on Bank 1 (Right Hand side of the engine).

Photo:
ghost45_16.jpg

Jun 10, 2011 | Hyundai Sonata Cars & Trucks

1 Answer

How to change spark plugs on a Hyundai Sonata 2.7 liter V-6 ?


This is listed as a 2.6 hours operation in the labor guide, so be aware that it could take you that amount of time or substantially longer. The left side is fairly easy after you remove the spark plug wire cover. The right side is the most difficult because it requires removing the upper intake manifold which is estimated at about 2 hours alone.

May 29, 2011 | Hyundai Motor 2004 Sonata

1 Answer

I just need a diagram of spark plug replacement in 1997 Hyundai sonata 2.0 liter engine automatic.


For the 1997 Hyundai Sonata 2.0L DOHC In-Line 4-Cylinder:

Firing Order:
1 - 3 - 4 - 2
Cylinders:
..........(back)..........
|...4....3....2....1...|
.........(front)
Coil Connections:
(back)
|..1..|
|..4..|
|..3..|
|..2..|
(front)

Let me know if this helped and THANKS for using FixYa.com!

Aug 04, 2010 | Hyundai Sonata Cars & Trucks

1 Answer

PDF 2001 Hyundai Sonata spark plug change instructions


I posted this solution for this same engine on the 2001 Kia Optima. It is Exactly the same 2.5 V6, and the instructions are exactly the same. I recommend replacing the plug wires. Please see 2001 kia Optima for the rest. Good luck, it's fairly easy.

Jan 25, 2010 | 2001 Hyundai Sonata

1 Answer

My check engine light came on after i changed the spark plugs on my 2003 Hyndai Sonata V6. now my is not running like it should. how do i reset the computer


Well you will first need to check you installation. The check engine light does not go on for no reason especially since you say the car isn't driving right.You should start by checking to make sure that there are no vacuum leaks from when you removed the intake manifold, be especially attentive to all the small hoses.The last thing on your list to check will be the spark plug wires, make sure they are well seated on the plugs.

Oct 22, 2009 | Hyundai Motor 2003 Sonata

1 Answer

Which cylinder in #6 on a 2006 V6 hyundai sonata


Autozone.com says that for this vehicle the firing order is 1-2-3-4-5-6 and the set-up is 2/1 4/3 6/5 meaning that the #6 cylinder is far right on the back. It goes #1 #3 and #5 in the front and #2 #4 and #6 in the back.

Jul 18, 2009 | 2007 Hyundai Sonata Limited Sedan

1 Answer

Change sparks plugs on 06 hyundai sonata v6


You didn't specify whether you have the (4) cylinder or the (6) cylinder engine..... I have a 2004 Hyundai Sonata 2.4L 4 cylinder and I just changed the spark plugs in it. I believe that the 2005 2.4L engine is the same. To locate and change the (4) spark plugs on a 2004 Hyundai 2.4L 4 cylinder engine: Remove the (4) 12mm bolts from the decorative plastic engine cover. Remove plastic cover from engine and place it off to the side out of your way. Standing in front of the car, the (4) spark plugs are located laterally (left to right) in the recessed area underneath where the plastic engine cover was removed. Note: This engine has (2) coils....They are located above spark plugs number (2) and (3) from left to right. Starting with the fist spark plug on the left: Remove the spark plug cable by pulling straight up on the insulated connector. Using a spark plug socket, remove the old spark plug and install a new one in it's place. To access the second spark plug from the left, remove the electrical connector and the spark plug cable wire from coil number (1) and then remove the (2) 12mm bolts that secure the coil to the engine. Spark plug number (2) is located directly under the coil. Lift the coil straight up removing the insulated connector from spark plug number (2). Using a spark plug socket, remove old spark and install a new one in it's place. Repeat same procedures for spark plugs number (3) and (4). Note: If you have the (6) cylinder engine, the front (3) sparks pluge are readilly accessible but in order to access the (3) rear spark plugs, you will have to remove the intake manifold

Jul 08, 2009 | 2006 Hyundai Sonata

1 Answer

Changing spark plugs on V6


you will have to remove intake manifold to gain access to cyl 1 3 5. there are no special tools it can be done with hand tools. i would replace wires since you are there. intake gasket can be reused but if you wanna be safe or got high mileage replace

Feb 03, 2009 | Hyundai Motor 2003 Sonata

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...