Question about Fiat Grande
How to remove door panel
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I would start by pulling the door panel off the inside. This will give you a look at the lock and handle mechanism to see what is amiss. Suspect a broken, fallen link that may now be lying in the bottom door channel and retrievable with magnetic pick-up tool. Get a good trim removal tool since a panel that large is easy to mar if you try pulling it with a screwdriver. Have a helper assist with the job and start by pulling the rear and middle seats if you can. To cheat on this, you may want to pull the panel on the opposite door to see how everything is supposed to look.
Posted on Jan 25, 2009
Just had the same problem with my '05 van. I put the Master Switch in the off position. I pulled fuse #7 on the driver side sub panel, located just above the engine hood release. I then disconnected the neg. terminal on the battery. I manually opened the pass. side slider and closed it.
I reconnected the battery and replaced fuse #7. I put the master door switch in the on position. I activated the auto door switch, and it worked.
Posted on Feb 15, 2009
Hidden screw underneath the power window switch, you have to remove, use a dull knife to gently pry up on the plastic molding, it should pop out with relative ease then you will see the screw.
Posted on Jul 28, 2009
You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door
Posted on Aug 14, 2009
either something jammed in track/lock-- or actuator rod broke or disconnected from lock --need to remove interior door panel to get to lock release and latch check all rods and clips for damage or missing repair or replace as necessary u can manually unlock the door at latch if something was jammed or stuck in latch
Posted on Nov 26, 2009
Testimonial: "thank you iwill try that let u know if it works thanks dan "
Tips for a great answer:
Jun 20, 2015 | Fiat Doblo Cars & Trucks
Mar 13, 2015 | 2006 Fiat Ulysse 3.0
Aug 01, 2014 | 2005 Fiat Palio
Jan 26, 2014 | 2006 Fiat Ulysse 3.0
Jun 28, 2013 | 2005 Fiat Ulysse
Aug 27, 2012 | Fiat Doblo Cars & Trucks
Jan 03, 2010 | Fiat 124 Cars & Trucks
Sep 28, 2009 | Fiat Strada Cars & Trucks
Oct 12, 2017 | Fiat Cars & Trucks
198 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: