Question about 2002 GMC Envoy

Open Question

How to repair a neutral safety switch in a 2002 envoy

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 3 Answers

SOURCE: 2002 Envoy will not turn over.

did you try turning the key all the way over while moving the gearshift selector through all positions.Sounds like gearshift linkage may need adjusted.

Posted on Feb 25, 2009

  • 523 Answers

SOURCE: replace neutral safety switch on a 1988 gmc sierra

Typically the Neutral Safety Switches are located with the gear selector, either in the column or the floor.

Hope this helps,
Tom

Posted on Aug 21, 2009

  • 50 Answers

SOURCE: My 2002 GMC Envoy transmission slips into neutral

try adding fluid and if still slipping neeed to have it checked could just need a fluid change

Posted on Oct 16, 2009

  • 50 Answers

SOURCE: CAN NOT GET 2002 ENVOY OUT OF NEUTRAL ,4WD LIGHT

CHECK SOLENOIDS THAT SHIFT TRANSFER CASE.

Posted on Jan 27, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What will cause my 2008 gmc envoy not to move when I put it in reverse neutral or drive


  • Neutral safety switch sends a signal to the on-board computer to allow the engine to start and to engage the transmission
  • When not replaced, vehicle may experience no start and/or transmission will not shift out of park.Here's a link to the part,
Duralast Neutral Safety Switch DR4146 Read Reviews on Duralast DR4146

Mar 22, 2016 | GMC Cars & Trucks

1 Answer

No power to starter


Was there power before ? Normally I would say check the neutral safety switch and the security system.

Jan 07, 2014 | 2002 GMC Envoy

2 Answers

Where is the relay and/or in line fuse for the back up lights on a 2002 GMC Envoy. New bulbs and fuses are fine in both fuse boxes. Still not working so there must be a in line fuse or relay out?


check the neutral safety switch. connected to the shift lever, keeps you from running the starter unless in park or neutral, AND it turns on the back up lights when in reverse.

Jun 27, 2011 | 2002 GMC Envoy

1 Answer

2002 GMC Envoy, i put the key in ignition and vehicle will not start sometimes and other times is starts fine. we have checked the starter, battery and battery connections, all fine. Changed the starter...


Ignition switch and neutral safety switch. Next time it happens wiggle thekeys in the ignition switch and try to restart.If it starts its probably the ignition switch. Then locate neutral safety switch on brake pedal and put meter on B+ wire from switch to starter relay and see if you get B+ on the would -be- crank. Next locate B+ wire from starter relay to starter hook a meter to it and see if you get B+ on the would -be crank.
Where ever B+ is missing is your problem.

Apr 14, 2010 | 2002 GMC Envoy

1 Answer

2002 Jeep Liberty 3.7 automatic wont turn the starter over. LIghts good. Battery good. Could it be the starter, cables to the starter, neutral safety switch?


have same problem, ratan9 solution is pretty junk and I dont know why waste time posting it. After talking to local shop, to "test" the neutral safety switch, try to start in neutral, try to move shifter "farther" into park and turn key, listen to any clicks possible. If moving to neutral starts it you've got a bad switch. All the searching i've done it's either the safety switch, the ignition switch or a short in the harness somewhere

Apr 11, 2010 | 2002 Jeep Liberty

1 Answer

My 2002 GMC Envoy transmission slips into neutral


try adding fluid and if still slipping neeed to have it checked could just need a fluid change

Oct 15, 2009 | 2002 GMC Envoy

1 Answer

Location of neutral safety switch on 2002 Chevrolet Venture, how to replace.


NEUTRAL SWITCH IS ON TOP OF TRANSMISSION.ITS ON THE MANUAL SHAFT . YOU NEED A HAYNES REPAIR MANAUL.IT WILL SHOW YOU HOW TO ADJUST NEUTRAL SWITCH WHEN REPLACING IT.YOU CAN GO TO ADVANCE AUTO OR OREILLY`S OR AUTO ZONE.TO BUY A REPAIR MANUAL.

Oct 03, 2009 | 2002 Chevrolet Venture Passanger

Not finding what you are looking for?
2002 GMC Envoy Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...