Question about 2008 GMC Acadia

Open Question

How to replace power steering pump 2008 gmc arcadia

How to get to it

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 12 Answers

SOURCE: removal of power steering pump on 1998 GMC Sierra 1500

you need a power steering pump puller the rest is simple any trouble let me know

Posted on Dec 24, 2008

Ad
  • 11 Answers

SOURCE: drain and replace power steering fluid in my gmc

generally there is 2 hose going to the reservior , usually the small one it the inlet, take that off anbd put a blocked off hose in place. put into a bucket, have a few liters handy turn the car on and have some1 fill it keeping it full, warning it will come out fast. and have some1 turning the steering wheel lock to lock. untill clean, the turn car off

Posted on Jul 11, 2009

c17hydro
  • 2984 Answers

SOURCE: replace power steering pump

NOTE: The following procedure requires the use of the GM Puller tool No. J–29785–A (1985–92), Puller J–25034–B (1993–96) or equivalent, and the GM Pulley Installer tool No. J–25033–B or equivalent.

  1. Disconnect the negative battery cable for safety.
  2. For 1996 vehicles, remove the air cleaner assembly for access.
  3. For 1993–96 vehicles, remove the hood latch and the upper fan shroud.
  4. Release tension and remove the drive belt. For details, please refer to Section 1 of this manual.
  5. Remove the power steering pump pulley using a suitable puller tool.
  6. Remove the power steering pump retaining bolts, then reposition the pump as necessary for access to the hoses.
  7. Position a fluid catch pan under the power steering pump.
  8. Remove the hoses from the power steering pump and drain the excess fluid into the catch pan.
  9. WARNING
    Be sure to cap all openings in the pump hydraulic system to prevent excessive fluid spillage and the possibility of system contamination.
  10. Remove the power steering pump from the vehicle. To install:
  11. Position the pump to the vehicle, then uncap and connect the pump hoses.
  12. Install the steering pump to the retaining bracket, then secure using the retaining bolts. Tighten the power steering pump-to-bracket bolts to 37 ft. lbs. (50 Nm). For 1996 vehicles, tighten the nut to 30 ft. lbs. (41 Nm). NOTE: On early-model vehicles where the drive belt is tensioned by pivoting the power steering pump assembly, do NOT fully tighten the mounting bolts at this time, since you will just have to loosen them again for belt installation and adjustment.
  13. Install the pump pulley using the GM Pulley Installer tool No. J–25033–B or equivalent. Press the drive pulley onto the power steering pump.
  14. Hand-tighten the pivot bolt, the adjusting bolt and the washer.
  15. Install the drive belt. On early-model vehicles so equipped, properly adjust the belt tension. For details on belt installation and tension adjustment, please refer to Section 1 of this manual.
  16. For 1993–96 vehicles install the upper fan shroud and the hood latch assembly.
  17. For 1996 vehicles, install the air cleaner assembly.
  18. Connect the negative battery cable.
  19. Refill the power steering reservoir and bleed the power steering system.
  20. Remove the jackstands and carefully lower the vehicle.
  21. Road test the vehicle, then check and top-off the power steering fluid.
Fig. 3: Removing the power steering pump pulley — 1985–92 vehicles

213c6a5.jpg
Email me at greg.bernett@mcchord.af.mil for an engine picture breakdown.

    Posted on Jul 22, 2009

    pippall
    • 1486 Answers

    SOURCE: power steering pump on my 1997 GMC K2500 truck??

    Check the power steering fluid level.Allso check the master cylinder level.Witch ever is low is your problem k

    Posted on Nov 08, 2009

    chuckster57
    • 1102 Answers

    SOURCE: power steering and brakes stopped working in my

    You probably have hydroboost brakes and that system is powered by the power steering unit. If you have no steering and brakes, the first thing to check is the power steering pump. Check for low/no fluid. If the fluid is okay then the pump might not be pumping and you will need to replace it.

    Posted on Dec 26, 2010

    Add Your Answer

    Uploading: 0%

    my-video-file.mp4

    Complete. Click "Add" to insert your video. Add

    ×

    Loading...
    Loading...

    Related Questions:

    1 Answer

    Where is the transmission filter located on 2008 GMC Arcadia


    it is inside of the transmission. On this model it requires complete tear down of the trans to replace

    Oct 29, 2016 | GMC Cars & Trucks

    1 Answer

    HARD TO TURN MY WHEEL WHAT DOES THAT MEAN WITH MY 2008 GMC ACADIA


    You likely are low or out of power steering fluid. Or you power steering pump has failed.

    Aug 26, 2014 | 2008 GMC Acadia

    1 Answer

    My steering wheels gets hard when i turn or reverse in my 2008 gmc acadia what does that mean


    This just means the drive belt to the power steering pump is loose. Tighten the belt and you'll be good to go.

    Aug 26, 2014 | 2008 GMC Acadia

    1 Answer

    Arcadia front end noises buschings?


    The acadia has two common problems for front end noises. You likely have worn lower control arm bushings. You will need both front lower control arm bushings. Also it is common for the struts to wear out from about 75k miles up. If they are leaking or have a harsh ride you should replace those as well.

    Jul 01, 2014 | 2008 GMC Acadia

    1 Answer

    We have a 2008 GMC Envoy. It started making a high pitch squeel as soon as we started the car and only stops when the car is turned off. We changed the serpentine belt and both bearing. But the squeeling...


    Its vary likely a bearing noise . Eighter the altenator power steering pump air pump or water pump . Although it could also be the belt tenisinor its a big time ware part . Thats what i would look at first .The water pump would be leaking from the bottom . The altenator would be giveing you battery problems charging . The air pump if you have one would show signs in engine porformance . The power steering pump you may not notcce a porformance issue .Its likely the belt tenisioner

    Apr 27, 2012 | 2008 GMC Envoy

    1 Answer

    Overheating problem on my 2008 gmc arcadia. Changed the oil added coolent. once car starts shoots up to 260. What could it be.


    FIRST CHECK THE CONDITION OF YOUR RADIATOR, IT MY NEED SERVICING OR REPLACING,IF OK, CHANGE THE THERMOSTAT IT MAY BE STOCK IN THE CLOSE POSITION ALSO CHECK FOR LEAKS AND CHECK TEMP SENDING UNIT. IF ALL THAT CHECKS OUT OK YOU MA HAVE A BLOWN HEAD GASKET

    Aug 25, 2011 | 2008 GMC Acadia

    3 Answers

    Power steering and brakes stopped working in my 2003 GMC sierra 2500 HD..replaced water pump and belt..still not working..


    You probably have hydroboost brakes and that system is powered by the power steering unit. If you have no steering and brakes, the first thing to check is the power steering pump. Check for low/no fluid. If the fluid is okay then the pump might not be pumping and you will need to replace it.

    Dec 26, 2010 | 2003 GMC Sierra 2500HD

    1 Answer

    Show me how to replace power steering pressure hose on 1995 GMC Yukon


    It's very easy, undo screw one end from back of power steering pump, no need to remove pump, and unscrew other end of hose from steering gear box, replace hose and top off with power steering fluid, when you undo power steering hose have a pan to catch the power steering fluid that will drip out.

    Aug 17, 2010 | GMC Yukon Cars & Trucks

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    240 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top GMC Experts

    yadayada
    yadayada

    Level 3 Expert

    76164 Answers

    Freddy

    Level 3 Expert

    1311 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Are you a GMC Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...