Question about 2004 Ford Explorer

Open Question

2004 ford explorer throttle body relearn - 2004 Ford Explorer

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 45 Answers

SOURCE: 2001 ford explorer sport does not idle when cold

If engine is actually running lean,could be clogged fuel filter or weak fuel pump.

Posted on Nov 29, 2009

  • 73 Answers

SOURCE: My Ford Explorer idles too high - I've cleaned the

The throttle linkage may be sticking. May have a vacuum leak at the intake manifold or with the hose connections.

Posted on Mar 28, 2010

  • 5481 Answers

SOURCE: I need to know how to replace the throttle

The TPS is a small switch about the size of a butane lighter. It has 1 electric connector and 2 screws. It is located on the airhorn which is the metal part behind all the plastic ductwork of your engines air filter.

You unscrew the part and it will come off. There is a small slot to match the flap on the shaft it attaches to. The TPS fits onto this shaft and thats all you have to worry about before replacing the screws. Then tighten the part, switch electric connections and you should be done.

If he engine idles a little faster or slower, one of the screw slots is elongnated. You loosen both screws and slightly twist the slot to your preference and then tighten. Thats all it takes.

Posted on Apr 23, 2010

  • 178 Answers

SOURCE: where is the throttle position

If you see where the throttle moves and throttle cables hook up it's on the opposite sid it's a three wire two bolt sensor.

Posted on Nov 03, 2010

alicantecoli
  • 22095 Answers

SOURCE: 2004 explorer 4.0 v6 surging at 2300rpms while

take it back to dealer ,all ford repairs come with a warrenty

Posted on Dec 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I do a throttle body replacement relearn on a 04 isuzu ascender


The relearn is done by unhooking the battery for 30-60 minutes. With all HVAC OFF, hook the battery back up and drive your Ascender around for about 40 min or so, at this time, it will relearn. To test it, stop the vehicle put it in park and turn your AC on, if your car doesn't show signs of boggin down or trying to die on you, your relearn was done correctly. This is all assuming that your throttle body is CLEAN!!! If it's not clean, your idle will be bad and engine will try and die on you at idle when your AC or Defroster are on. Relearn should of already been done---> you always disconnect the battery when cleaning the throttle body, as to not to damage the stepper motor that moves the butterfly. To properly clean the throttle body and for best results, always remove the entire throttle body and clean BOTH sides with a sensor safe spray like Seafoam and a rag or nylon brush, you can reuse the hard plastic gasket. Hope this helps!

Oct 12, 2015 | 2004 Isuzu Ascender

1 Answer

2004 chevy colorado throttlle body relearn


I haven't done a throttle relearn. All I have done are plug and play. Ecm controls the throttle thru the pedal position sensor. I've done up to 2010 so far, on various makes and models.

Oct 11, 2014 | 2004 Chevrolet Colorado

1 Answer

I had 2004 ford explorer lxt the gas pedal no working


The throttle is drive by wire meaning there is no cable linkage operating the throttle directly. Instead the throttle is operated electronically. There are sensors connected to the pedal as well as to the throttle body. Either one or both could be bad. I suggest scanning the OBD I I diagnostic port for trouble codes and then looking up the codes to determine the problem.

Jun 13, 2014 | 2004 Ford Explorer

1 Answer

Code p115e


That is a code for the TB. Throttle Actuator Control (TAC) Throttle body Air Flow Trim at Max Limit

Remove the throttle body and give it a good cleaning. Use cleaner specified for cleaning throttle bodies, do no use standard carb cleaner

Oct 23, 2013 | 2004 Ford Explorer

2 Answers

Help! I have a 2004 Ford Explorer XLT Sport, V8.


try disconecting the battery for about 40min and leave the key in the on position while its disconected, turn off the key and reconnect the battery this will reset the ecu and may help your problem good luck and please rate

Aug 01, 2011 | 2004 Ford Explorer

1 Answer

Engine idle changes when I turn on the A/C in my 2004 TrailBlazer


Throttle body needs cleaning, the cleaning process needs to be done on the front side and especially the back side of the throttle body. Also, while doing the cleaning, the battery should be disconnected to allow the computer to reset and relearn to the clean throttle body.

Jul 22, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

My 2004 trailblazer is trying to cut off when i turn on the air conditioner when i either stop or slow down.


Needs to have the throttle body and throttle plate cleaned. While cleaning is being done, disconnect battery for about 30 minutes, this will cause computer to relearn to the freshly cleaned throttle body.

Aug 07, 2010 | 2004 Chevrolet TrailBlazer

1 Answer

My 2004 Explorer will not accelerate, only idles. Disconnected the battery to clean the terminals. Charged the battery on 6amps High for two hours. Started fine but will not accelerate from idle.


verify the gas pedal cable is connected out at the throttle body,you will need to remove the plastic cover that covers the linkage on the throttle body.

Dec 20, 2009 | 2004 Ford Explorer

1 Answer

How does a throttle actuator go bad and could it happen while they are doing body work on the car? Would this also cause my car to need my keys reprogrammed?


Was a computer replaced? If it has electronic throttle, it most likely needs to be relearned as well as having the keys reprogrammed. I have seen all manner of things happen to electronics on cars, and never know when it will happen.

Jul 07, 2009 | 2004 Ford Explorer

Not finding what you are looking for?
2004 Ford Explorer Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...