Question about 1996 GMC Jimmy

Open Question

Transmission will not shift in 3 or over drive it hi revs

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

High transmission shift points 1-2 and 1-3


Chevy automatic transmission workings (Bob Hale) - Yarchive

yarchive.net/car/transmission.html
When a sufficiently high RPM is reached then the weights hit stops and do ... There are two shift valve assemblies, one for the 1-2 shift and the other for the 2-3 shift. .... Thehigh RPM factory governor appears to have about 1/3 less metal in the ...

Possible Transmission Issue - weird shift points/high RPMs ...

thespeedfreaks.net > Jeep Talk/Tech > Tech Questions
Oct 2, 2012 - Thread: Possible Transmission Issue - weird shift points/high RPMs ... throttle pressure, but seems to blow past the 1st gear shift point and revs up to 4500 RPM or so then shifts. .... The 1 - 3 shifts actually felt pretty natural.

[PDF]Simple Shift Installation and Tuning Guide for Ford Trans ...

https://www.powertraincontrolsolutions.com/.../download.php?...Simple...

Dec 29, 2015 | Cars & Trucks

1 Answer

My dads 2003 Cadillac CTS will shift into all gears but goes nowhere in any of them. The engine will just rev and you don't feel the ****** going into gear when you shift.


Failed Transmission

Happens when the fluid is not changed
every 2 or 3 years & you drive knowing
you have a transmission problem

Aug 15, 2014 | 2003 Cadillac CTS

1 Answer

Feels like slipping transmission / transfer case


either your rear driveshaft is missing, your rear axle is pooched. the same transmission drives both ends.

Jul 23, 2017 | Chevrolet Blazer Cars & Trucks

1 Answer

2003 Grand Am Automatic will shift normal from 1-2 but will not shift into 3 or 4.


Worn clutches or solenoid issues if it is an Alison style box.

Apr 02, 2017 | Pontiac Cars & Trucks

1 Answer

1994 gmc sierra pickup 4.3L V6 automatic transmission experiencing difficulties with ODrive = 4th gear, and Drive = 3rd gear, engine revs up to the max properties with little to no forward motion. Rev


You have internal transmission damage I expect the clutches on third and fourth gear are wiped out. Its either that or a solenoid gone bad that holds those clutches pressure get it in a transmission shop soon to avoid whole transmission replacement costs.

Mar 19, 2012 | Cars & Trucks

1 Answer

2nd to 3rd shift engine revs high


You are going to need to rebuilt the transmission, oh what fun.

Jun 24, 2017 | Cars & Trucks

2 Answers

I have low exceleration when i take off


Only recently has my 97 Honda Passport been acting like the transmission slips...I'll be in Drive and the revs jump from 2 to 5 or 6; I'll drop it to 3, and it settles down. Last week, I was in Drive, then went to 3...then back to Drive and it jumped...and the Check Trans light came on.

Jul 17, 2010 | 1997 Honda Passport

2 Answers

WHICH BUTTON TO APPLY IN NISSAN STANZA 1991, POWER OR COMFORT BUTTON?


Acutally there is 3 position settings for the transmission selector, the power setting which changes the shift points higher ,more rpm's, center position basic auto selection the transmission selects the best driving gears based on your habits, and the comfort mode which shifts the transmission easily and smoothly, no high rev shifts, best for good fuel mileage, but if you need to get on it it will go.

May 19, 2010 | 1991 Nissan Stanza

1 Answer

Automatic transmission wont catch into any gear


You sould have been moore frequent on your transmission fluid changes, and you shouldn't have taken it to Jiffy Lube either. Your best bet is to drain and fill the trans fluid run it shift gears. Drain and fill again. Do this 3 times. Yeah the transmission fluid is expensive. on the last drain and fill you want to get a bottle of LUBE GUARD from NAPA or who ever sells it. put the whole 10oz bottle in. Shift Rev, 1, 2, 3, D. Neutral Rev D. If that don't work then you have bad seals.

Mar 15, 2009 | 1996 Saab 9000

1 Answer

Transmission won't shift fron 1st, 2nd or 3rd correctly!


Sorry to inform you that it sounds like your transmission needs servicing.
Check the fluid levels and replenish if level is down.
If after doing this,the car still wont shift properly or smoothly,,then you will have to take the car into a transmission mechanic.

Jan 16, 2009 | 2000 Honda Accord

Not finding what you are looking for?
1996 GMC Jimmy Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...