Question about 1982 Ford F 250

1 Answer

Ford 400cid motor with auto tranny

Does anyone know what ford's 400 cid motor with an automatic trans suppose to run at in regards to rpm when doing 110km/hr

Posted by on

  • trevor_stree May 08, 2009

    thanks i only ask cause the standard tranny is only a 3 speed and the auto seems to be a 3 speed to but at 110km she is running at 3000 and my 2002 with bigger tires runs at 2000rpm at 110km . thanks again for ur help

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 147 Answers

Depends on gear ratio and wheel size ..but rule of thumb from what i seen in cars and trucks on the freeway at cruising 80 mph in a manual 5 speed you will run around 4000 rpm in an automatic around 3000 its the way they are designed the gear ratios..

Posted on May 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1999 ford ranger shifts hard from 2nd to 3rd gear what is the problem I recently changed fluid and filter but shifts hard !


Auto Trans not shifting correctly from 2nd to 3rd - Ford Explorer ...

www.explorerforum.com > ... > Under the Hood

May 8, 2004 - 19 posts - ‎9 authors
Auto Trans not shifting correctly from 2nd to 3rd Under the Hood. ... Become an EliteExplorer. Lithuania. 1999 5.0. Join Date: Jun 2003. Posts: 107 ... When this happens, the transmission will skip to the next gear like you said.

Transmission Harsh shifting - YouTube

? 3:59
https://www.youtube.com/watch?v=aAoiL4vR8Qw
Jan 13, 2013 - Uploaded by James Burns
... Doctor, explores the causes of harsh shifting in automatic transmissions. ... Early diagnosis is important to ...

Hard Tranny Shift between 2nd & 3rd - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > Super Duty & Heavy Duty
Feb 24, 2012 - Hard Tranny Shift between 2nd & 3rd Super Duty & Heavy Duty. ... I just got a new to me 99 f250 5.4 V8 SD XLT 4x4 Auto Trans longbox 118k miles. ... it out and said it was solid except for a hard shift between 2nd and 3rd gears. ..... Hard shift between 2nd and 3rd, Brenda Lamka, Explorer, Sport Trac, ... hard shift 2nd to third gear only 4r100
Dec 26, 2012
hard shift into 3rd
Nov 4, 2009
4r55e 5r55e Ranger / Explorer Transmission Problems - CLICK ...
Mar 15, 2007
00 Expedition trans shifts late and hard

Jan 01, 2016 | Ford Cars & Trucks

1 Answer

Maybe engine or trans problem!


Engine problem you can use obd2 scanner to check system first.Make sure it don't get fault codes.

Jul 26, 2013 | Cars & Trucks

1 Answer

I have a 1990 Geo Prizm w/ auto trans. Is it suppose to shift more than two times? And it will only shift into second if i manully shift it. The trans. has to warm up before it will even shift into second....


The car is almost23 yr's old and may have never had the tranny flouid and filter changed. this is where i would start befor replacing tranny. This will cost you around $75 but may save you $1500 on a rebuilt tranny. best of luck to you.

Apr 07, 2011 | 1990 Geo Prizm

1 Answer

I did a stock motor swap for my 2000 honda civic. "Its an automatic by the way". I put the old tranny onto the motor i bought. Drop everything in, crank it up but the tranny felt like its jerking...


you need to drain it and use honda trans oil its sythetic if you use straight md3 it will shift hard. make sure everything is plugged in.

Dec 11, 2010 | 1997 Honda Civic

1 Answer

1996 ford ranger, automatic trans, Torque converter will not unlock at times (50%) trans has very harsh upshifts as well. 3.0 L engine with f speed overdrive


im not sure about the fan Try spraying the heck out of the entire assembly on the drivers side of the tranny with PB Blaster and as for hard shifts is it manual or auto? if auto change filter

May 01, 2010 | 1996 Ford Ranger SuperCab

1 Answer

I have a 1997 Plymouth Voyager with the 3.3L engine and the 3 spd w/overdrive automatic transmission. Until yesterday the trans gave no signs of possible repair needed. Now the van will not want to go into...


It is possible to be a minor fix. But you may want to get on it asap to avoid being a major fix. Talk to the Commercial parts pro at your nearby auto parts store, for a shop that he ( cough,cough, they are supposed to be impatial) recommends/knows or Would take his car to.

Feb 02, 2010 | 1997 Plymouth Voyager

1 Answer

89 ford f250 automatic transmission shifting hard-at idle hear a ticking sound near tranny


I don't know about the ticking but I know changing the filter and fluid is the first thing to do when an auto trans has a problem plus cleaning the pan. Another thing is get a automobile sound wand and get under there and see if you can pinpoint the ticking.

May 04, 2009 | 1994 Ford F250 Supercab

1 Answer

What is the timing set at for a 1983 dodge 318/automatic? the sticker under the hood is gone.


Hello snowcat426a:Not knowing for sure thing like altitude or if Calif. emissions here are all the specs. 318 w/2bbl. carb. man. or auto trans. 12 @ 750 rpm. with California emissions auto or man. trans. 16@700 rpm high altitude with auto or man. trans 16@700 rpm. If equiped with a 4 bbl carb. the specs are as follows. 4 bbl.stand trans 12@750 .with automatic 16@750 rpm. With California emissions stand. transnission 16@750 rpm. Automatic specs for California emission are not available.Heavt duty specs. man trans, 8@750 rpm.auto is the same as the man. transmission specs. Should you need further help just ask. please leave rating as this helps with feedback. Thank You for using FixYa. Roger

Apr 16, 2009 | Dodge Ramcharger Cars & Trucks

1 Answer

CVT Tranny


I work at a Ford dealer and we have seen very little trouble with this trans-axle. We replaced a mectronics unit in one and replaced one complete assembly, other then that we have had no trouble with them and personally would have no fear of buying one.

May 15, 2008 | 2005 Ford Freestyle

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...