Question about 1999 Land Rover Range Rover

Open Question

Eka codes for 2002 landrover freelander

Lost ign. key and fob, have spare keys cut a few yrs ago. Will turn ignition on, now I need eka to move car to dealer(90mi) for key replacement. Landrover customer support could not find the codes for my VIN when called.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: what is the marking for the timing belt setting for freelander landrover 2002

timing info on a 2002 landrover freelander v-6

Posted on Aug 28, 2009

Ad
  • 136 Answers

SOURCE: 2002 landrover freelander When ignition key

check connector on starter motor, connector has been knowen to work lose due to heat.

Posted on Dec 26, 2009

  • 17 Answers

SOURCE: How do i programme a new remote fob for my 98 R Freelander

Programming a new Key
Replacing a missing master key is quite expensive from Land Rover, try not to get sucked into the extra cost of "Dealer coding" You can do this yourself in 2 minutes by following the simple process below.
1) Get in and close all doors. Turn ignition on and off quickly and remove the key (all within about 5 seconds).

2) Within 30 seconds of turning the ignition off, while holding down the "unlock" button, press the "lock" button three times. Release the "unlock" button. (You may or may not get the confirmation from the door locks.) Holding the key at your head level provides best results as the key sensor is in the side window pillar.

3) Repeat for each key you want to initialize within 30 seconds after the last one you initialized (if you have more).

4) Right after doing the last key, quickly put the key back in the ignition and turn it on/off again to finalize.

Posted on Apr 07, 2010

  • 12170 Answers

SOURCE: just bought a landrover freelander 05 plate, the

need to find out if key has a electronic chip in it if no chip any place that carries the blank can cut u a key most key cutter places have the test box to verify if it has one --dealers and a limited few lock smiths[check ur local area]can cut ur electronic key ----

Posted on Apr 13, 2010

  • 53 Answers

SOURCE: how much pounds is a 2002 landrover freelander

check on the parkers web site
www.parkers.co.uk

Posted on Jul 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 freelander engine immobilised and wont start there is no eka code for this model. How can i get my car to start again


do you know if the ignition box is any good, some auto part store can test the unit.
www.howto.com/mfg.name/make/model/testing/procedures/good/or/bad/
check the fuse box, your look for a fuse protection, its a fuse, located where the power comes into the fuse box, it sqaure, S-shape, its to protect the unit from shorting out the cars system, everything is dead in the car.
call the dealer ask if this car has that type of fuse, circuit proection fuse.
www.ask.com/mfg.name/make/model/fuse/protection/circuits/type/

Oct 22, 2015 | 2005 Land Rover Freelander

1 Answer

2002 durrango has anti theft from factory turn key everything lights up but ignition acts completely dead and wont start


you need the key fob,not the key but the fob that goes with it,it has a chip that synchs with your ign switch that tells it to turn on the fuel pump,i had this problem on my 2000 durango,you will need to buy an ignition switch,key and keyfob from a junk yard,or ebay for 50 bucks,otherwise you will have to go to the dealer to get one programmed.
71results for 2002 dodge durango ignition key
2002 dodge durango ignition switch
25544752-4ooqw4ezaqm3bmr4zsusbbqm-4-0.jpg

25544752-4ooqw4ezaqm3bmr4zsusbbqm-4-2.jpg

25544752-4ooqw4ezaqm3bmr4zsusbbqm-4-5.jpg

Mar 10, 2015 | Cars & Trucks

1 Answer

Lost my remote on my 02 jeep liberty and need to


the key fob? or radio remove or what?
remote to what.

the operators manual covers this , under car keys.
the car came with 2 Fobs. lost them both now>?
RKE its called, (makes looking fact more easy)
is this car with SKIS Immoblizer option> yes./no
if yes.
SENTRY KEY IMMOBILIZER SYSTEM - IF
EQUIPPED
im reading your operators guide now.
lost that too>?
Duplication of keys may
be performed at an authorized dealer (or locksmiths) or by using the
Customer Key Programming procedure.

DIY, takes 1 key , good, called a valid key, in the below text.
You can program new keys to the system if you have two
valid keys by doing the following:
1. Cut the additional Sentry Key Transponder blank(s) to
match the ignition switch lock cylinder key code.
2. Insert the first valid key into the ignition switch and
turn the ignition switch ON for at least 3 seconds but no
longer than 15 seconds. Turn the ignition switch OFF and
remove the first key.
3. Insert the second valid key and turn the ignition
switch ON within 15 seconds. After ten seconds, a chime
will sound and the SKIS indicator light will begin to
flash. Turn the ignition switch OFF and remove the
second key.
4. Insert a blank Sentry Key into the ignition switch and
turn the ignition switch ON within 60 seconds. After 10
seconds, a single chime will sound. The SKIS indicator
light will stop flashing, turn on for 3 seconds; then turn
off.
The new Sentry Key has been programmed. Repeat this
process to program up to a total of 8 keys.


did i guess right, the Key FOB RKE,
remove key entry fob.?

Sep 18, 2014 | 2002 Jeep Liberty

1 Answer

I have a 2002 landrover freelander. About every two months it will not start. It is not the battery as it turns over very strong. Let it sit for about 30 minutes and it will start. It is not flooded...


when it does it the next time take the key out every time you try to start it and it dosent start. It could be the ignition switch not the key. And if it starts sooner by removing key then you have an idea where to start.

Jan 02, 2012 | 2002 Land Rover Freelander

1 Answer

I have lost my key and fob for my freelander 1 2000, i have a key to get into the car but it wont start the ignition, and im currently in france working....any advice?


You will have to find a dealer that has the Land Rover test book programer and order an new key with transponder with key code to reset your immobliser their is a wide network of inter-national companies able to offer such services.

May 02, 2011 | 2002 Land Rover Freelander

1 Answer

Just bought a landrover freelander 05 plate, the key is seperate to the alarm fob can i get a new one cut without goin main dealer and what will it cost....ish


need to find out if key has a electronic chip in it if no chip any place that carries the blank can cut u a key most key cutter places have the test box to verify if it has one --dealers and a limited few lock smiths[check ur local area]can cut ur electronic key ----

Apr 11, 2010 | 2005 Land Rover Freelander

1 Answer

How do i programme a new remote fob for my 98 R Freelander


Programming a new Key
Replacing a missing master key is quite expensive from Land Rover, try not to get sucked into the extra cost of "Dealer coding" You can do this yourself in 2 minutes by following the simple process below.
1) Get in and close all doors. Turn ignition on and off quickly and remove the key (all within about 5 seconds).

2) Within 30 seconds of turning the ignition off, while holding down the "unlock" button, press the "lock" button three times. Release the "unlock" button. (You may or may not get the confirmation from the door locks.) Holding the key at your head level provides best results as the key sensor is in the side window pillar.

3) Repeat for each key you want to initialize within 30 seconds after the last one you initialized (if you have more).

4) Right after doing the last key, quickly put the key back in the ignition and turn it on/off again to finalize.

Apr 07, 2010 | Land Rover Freelander Cars & Trucks

1 Answer

Keyfob problem


try changing the fob battery .the freelander has a fob low battery warning tone that will start after the alarm has been deactivated by the fob with a low battery and will stop after the key is switched to acc. for any one wanting info on problems with freelander , goto this web site . http://www.myfreelander.co.uk/

Sep 11, 2009 | 2003 Land Rover Freelander

1 Answer

Hi ,, I need to know if my alarm is turned of or if the module is bad in my land rover freelander. can some one tell me where i can find it


The Haynes manual says the following:-
The central contol unit (CCU) is located in the back of the fusebox below the driver's side fascia. If a fault develops you have to use a LR delaer to use the diagnostics. The unit controls the anti-theft, windscreen wipers, courtesy lamp delay, door opening warning lamp, key-in alarm,rear foglights, light-on alarm, seat belt warning, handbrake warning, rear screen wiper, tailaget window and many others.
Section 12.20 has a whole section on the alarm. The key fob alarm handset contains a transponder which talks to a reader in the ignition switch. So the immobiliser will cut in if the ignition key and the key fob are not on the same key ring.

Mar 31, 2009 | 2002 Land Rover Freelander

Not finding what you are looking for?
1999 Land Rover Range Rover Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...