Question about Cars & Trucks
The tire pressure light comes on and flashes,all tires have been checked for proper pressure
Sensors go bad all the time ??
Posted on Nov 26, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Some newer Toyota vehicles have a sensor in the spare tire. Tires loose air over time naturally. I would check out the spare.
When did this TPS light start coming on?
Have you had new tires put on, or had a flat repair done before the light?
Posted on Apr 28, 2009
SOURCE: Tire pressure light is on
You cannot reset them,Make sure that you check the pressures in the tires. The Infiniti Tire Pressure Monitoring System is designed to trip the warning light anytime the pressure in any of the tires drops below 29 psi. At 29 psi it really won't look like the tires are low. You could have one tire at 29 or 28 causing the light to stay on all the time. Check your pressures, set at 34 or 35 to be safe, or whatever pressure the tire is recommended to be. Not all infiniti vehicles with TPMS have the display that shows the pressure in each tire. If the pressures are above 29 psi, Then there could be an issue with one or more of the sensors. If you have the tires replaced you will have to have the sensors relearned at the dealer. Tire rotations do not require the same.
Posted on May 08, 2009
The tire pressure monitor detects any changes in the tire inflation
pressure. Therefore, it must initialize and store it in its memory if
the tires or wheels have been replaced, re-inflated or the tires have
been rotated. You should be able to re-initialize the system by following these
1. check and make sure that your tires are inflated to the correct pressure
2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.
3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.
4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.
Posted on Aug 12, 2009
Testimonial: "Thanks so much!"
To reset the tire pressure light you need to get the tool.
You can get the tool here on link below.
Posted on Nov 09, 2009
Tips for a great answer:
Jun 29, 2017 | 2011 Ford Escape
Sep 21, 2013 | 2005 Ford Escape
Aug 13, 2017 | 2011 Ford Escape
Dec 13, 2011 | 2008 GMC Envoy
Jan 17, 2011 | 2008 Ford Escape
Jan 09, 2011 | 2008 Ford Escape
Aug 07, 2010 | 2004 Ford Freestar
Apr 16, 2010 | 2008 Ford Explorer
Apr 08, 2010 | 2005 Ford Escape
254 people viewed this question
Usually answered in minutes!