Question about 1999 Mercury Sable
Odd,look for a fault in the ground side of that system,
if you check for voltage at say the dome light ground to battery
ground,there should be 0. even a test light from the battery ground to the dome light ground would work,if it even glows the ground is faulty. All I can think of ,,good luck.
Posted on Nov 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: power windows wont work
All things Capri are at //www.techcapri.com/
The manuals are there - check them out ...
Wiring diagrams are there. Probably fixed by now anyway.
Posted on Jan 07, 2009
Go through your fuse box and check for any burned out fuses also they may take a relay which may also be out. You can pick up a HAYNES or other brand repair manual at any auto parts store. Auto Zone sells mainly Haynes books, they will guide you to your repair in a step by step repair. The books are kind of like "repairs for idiots" they are really detailed and easy to follow.
Posted on May 27, 2009
If it "RED" in color, like p/s fluid, and coming from the BOOT, then its your p/s rack assembly.The unit has to be replaced and alignment reset. ..also check the HOSES they are prone to leak also...hope this helped..GL
Posted on Jul 06, 2009
There are 2 fuses and a relay involved in this circuit but the lines that run power to the pump run partially exposed under the vehicle as well. Check the Interior Fuse, check the Fuse in the box under the hood and check to make sure you have voltage at the fuse under the hood. If these are good check for voltage on the wires going to the fuel pump at the fuel pump itself. You can do this with a multimeter and thumb tack. Use the thumb tack to puncture the insulation in the wires and test for voltage. If you don't have voltage there, start working your way back 12" at a time until you find the point where you have voltage to isolate the area of the break.
Posted on Nov 28, 2009
I HAVE THIS SAME PROBLEM AND IT is so aggravating I have tryed every thing changed relays fuses every thing and nothing works im at the point where im going to smash my windows out its now spring and the heat is not helping me at all my airconditioning doesnt work either a whole nother story if you find out the problem PLEASE PLEASE tell me i beg you i have a hour drive to work everyday IMNUTS !!!@#@!#$%
Posted on May 04, 2010
Tips for a great answer:
Jan 16, 2013 | Cars & Trucks
Nov 23, 2012 | Cars & Trucks
Jan 07, 2012 | 1999 Mercury Sable
Apr 20, 2011 | 2002 Mercury Sable
May 10, 2010 | 2002 Mercury Sable
Mar 28, 2010 | 1995 Mercury Sable
Mar 14, 2010 | 1999 Mercury Sable
Nov 27, 2009 | 1999 Mercury Sable
Jul 29, 2008 | 1992 Mercury Sable
121 people viewed this question
Usually answered in minutes!