Question about 1991 Dodge Ram 150

1 Answer

4x4 not working

My 91 is a full time 4x4 with just the lever inside that goes from 2 hi 2 4 hi my front drive axel alway's did turn now it does not turn unless I **** it into 4 hi then it will turn but I only still have 2 wheel drive anyone know what my trouble is . Thank you

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 25 Answers

Your front axle has a vacuum pot on the back side. make sure your getting vacuum in four high. if not there is a vacuum switch on your transfer case that could be faulty or the supply line for vacuum from the motor could be broken.

Posted on Nov 29, 2013

  • leo miller Nov 29, 2013

    Thank you I will check that !

  • K Taylor Dec 13, 2013

    Hey Leo it K Taylor how did you make out with your truck. Let me know if i can give you any more help.

×

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 295 Answers

SOURCE: 1999 Dodge Durango 4x4 stuck in 4wheel part time

The transfer case shift soleniod that engages the transfer case is sticking .
I would take it to the shop and have it checked out.

Posted on Apr 01, 2009

  • 245 Answers

SOURCE: 96 dodge 1500 4x4 4wheel drive doesnt work shift

Check the solenoid on the front axle.

Posted on Feb 17, 2010

jyackle5
  • 8197 Answers

SOURCE: I have a 2003 dodge

Yes you can drive the truck with out the lever in place. You just willl not be able to change it to 3 wheel drive if you need to. You will not have any problems though if you drive the truck that way.

Posted on May 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 99 dodge dakota v6 when im driving in 2


Put truck in reverse and zig zag backwards turning truck left and right will take it out of four wheel when stuck.

Aug 30, 2014 | 1999 Dodge Dakota

1 Answer

I have an 1994 GMC sierra 1500 4x4 and it has a lever to shift it into 4x4 hi or lo or 2 hi. I can shift it into any position but my front tires do not turn only the back ones! what could be the problem??...


the front axel control solinoid is not working, it's on the right front side of the front axel, it most likely the cause [ commom problem]. it's easy enough to replace, it just unscrews from houseing. good luck.

Jan 03, 2011 | 1994 GMC Sierra

1 Answer

Automatic 4x4 locking hubs one side not locking in


There is a possibility the axel U-joint is binding, this will put side load on the hubs and keep them from working properly. Turn the steering wheel either far right or left and with front of truck off the ground or the front end disengaged, see if the axel shafts turn free, both sides. If there is binding the U-joint(s) will have to be replaced.

Dec 17, 2009 | 1996 Ford F150 Regular Cab

1 Answer

When making a slow tight turn, the front wheels lock up and push.


This is a common problem on 4x4 trucks and jeeps, it is cause by stress building up on the axels, An easy way to relieve the stress is to drive in reverse for a few yards, this relieves the tention that builds up on 4x4s. I know it sounds crazy stress and tention?? it has to do with the ratio on turning radius, the outside wheel has to travel farther than the inside wheel and this causes stress and tention on the axel/front end.also try and not turn so sharp.you will notice that goes away if you dont turn as sharp...

Oct 23, 2009 | 1983 Dodge Pickup

1 Answer

What is the procedure for engaging a 92 ford f-250' 4x4 ?


First thing to do is engage the lock out hubs on the front axels if it has them, they should say "free" or "lock". Turn them to lock. Then inside the cab on the floor hump will be the 2H 4H N 2L slector. Pull the slector lever into 4H and you are in 4WD high range. Do not drive the truck in 4WD on dry pavement, only gravel/dirt or snow. The minor difference between the front and rear wheel speeds will "wrap up" the driveline and make it hard to pull the lever out of 4WD. It is recommended that you back the truck up at least 10 feet after you remove it from 4WD to "unwrap" the drivelines. Your choice as to disengaging the front hubs, but it will save wear and tear on the front axels and dirveshaft if you disengage.

Jun 29, 2009 | 1999 Ford F150 Regular Cab

1 Answer

4 wheel drive light is on in my jeep


vacumn pod on the front axel is stuck on. Jack up the front wheels spin both tires at the same time and see if the front drive shaft turns. If it does the 4x4 on the axel is engaged. The front drive shaft on these should not turn when vacumn pod is disengaged. YJ's have a split axel on the right side inner axel shaft.

Apr 10, 2009 | 1992 Jeep Wrangler

3 Answers

1990 Chevy 1500 4x4 won't engage 4 wheel drive


the 4x4 do not engage in my1990 chevy pick up what i need to check

Jan 24, 2009 | 1992 Chevrolet K1500

1 Answer

Four wheel drive not working


Check front axle actuator see if it came unpluged

Jan 18, 2009 | 1999 GMC Sierra

1 Answer

No four wheel drive


Hi, I had a 88 cherokee, had no 4 wheel drive, the vac. motor u r referring to engages the 4x4. Mine vac motor was replaced, fixed the problem.

Nov 09, 2008 | 1989 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

94 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8269 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...