Question about 1999 Toyota Camry

1 Answer

Gauges turn signals speed ometer not taking gas

Car just died at stop light

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 108 Answers

Your problem sounds like dirty battery cables. Either that or a loose connection. I strongly suggest you have it checked out by a Certified Technician. This condition is normally found during the Summer season while temperatures range in the 80F to 90F degree temperature range. It may also be a failed battery.

Posted on Mar 05, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I also need to find the fuse for the speed ommeter and the turn signal lights


get your self a good work shop manual as will list all you should need , try an online search as will be one on ebay or some where

Feb 08, 2015 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Dies when I first start have to restart a few times and dies at stop light unless it gets a little gas


This is usually a problem caused by a bad water temperature sensor. There are usually 2 sensors with one working the temperature gauge and the second working engine controls.

The "cold start" sequence is similar to a choke in old cars. It needs the signal from the water sensor to trigger the cold start sequence. The cold start sequence enriches the fuel charge, adjusts timing, and increases idle speed until the engine gets a little warm.

Now if stalling when warm, you have other issues. Manifold runners are a problem on some engines.

Feb 12, 2014 | 1999 Ford Taurus

1 Answer

Dodge intrepid 2004 showing code p1687, check engine came on and air bag light, speed ometer and tack gauge dropped to zero but started working 5 seconds later light is still on and showing this code. Can...


the lamps all change at engine stall , did it stall.
at about 300 rpm all engines (gas) stall, and the ECU changes state.
all cars.
does car run, ok, drive ok ,start ok, and sound ok? just a clue here.

Sep 25, 2013 | 2004 Jeep Wrangler

1 Answer

2000 Ford Contour hesitates or stalls when turning left or on inclines at or below 1/2 tank of gas


Your best bet , take an have a fuel pressue an flow test done . If you think it's fuel related . I'm sure you probably don't have the tool's to do these tests. We test , not guess as to what could be the problem . If clogged fuel filter it wouldn't get any fuel an it wouldn't start an run at all .

Mar 01, 2017 | 2000 Ford Contour

1 Answer

IS THERE A FUSE OR A RELAY FOR THE SPEED OMETER? 06 HHR


IF SPEEDODMETER BY ITSELF NOT WORKING THE VECHICLE SPEED SENSOR FAULTY.CHECK VECHICLE SPEED SENSOR MAKE SURE ELECTRICAL CONECTOR NOT LOOSE OR DISCONNECTED. IF YOUR INSTRUMENT GAUGES LIGHT NOT WORKING LOOK FOR BLOWED FUSE.

Sep 23, 2011 | Chevrolet HHR Cars & Trucks

1 Answer

Fuse box locator for dash board lights? Speed ometer, dash lights, gas gauge isn't working.


look up TIPM or IPM which connects to your left SCM that had an electrical overload due to your aftermarket tow wiring harness

Jan 17, 2010 | 2006 Chrysler PT Cruiser

2 Answers

My gauges (temperature, gas, speed, rpm) stopped working at the same time the turn signals and brake lights stopped working. I am assuming I blew something as it happened when I hooked my trailer up....


have a caravan ´93 3.0 motor mi problem is a temperature, gas,speed and tableboard light don´t work and the table indicates check gages
sorry i speak litle english
sincerity
a mexican friend
thak you..
jaibita2000@hotmail.com

Jul 09, 2009 | 1993 Dodge Caravan

1 Answer

Car starts and dies in 3 seconds


Try unhooking the battery for about 3-5minutes. I have a 2001 malibu that does the same thing. When you hook up the battery and turn the key forward you should see the gauges return to normal before you try to crank the engine. It may also be the theft system. To reset that you have to turn the key forward for 10 minutes and then shut it off for 10 seconds. Then try again to start the car. It may take up to 3 attempts at this. Which means sitting in the parking lot for over a half hour. Been there done that. GM sucks.

May 22, 2009 | 1992 Buick Park Avenue

1 Answer

Im looking for the fuse box for dashboard, speed ometer and gas gauge went off


there is a fusebox under the hood and also 2 fuseboxes in the trunk located next to the rear speakers

May 10, 2009 | 1997 Cadillac DeVille

1 Answer

Cluster lights come on and off fuel needle and speedotemeter stop


you need to take down the dash,and your gonna have to take it out
and do some soldering change a few resisters stuff like that circuits
may even be oxidated

Jan 20, 2009 | 1995 GMC Sierra C1500

Not finding what you are looking for?
1999 Toyota Camry Logo

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...