Question about Ferrari Cars & Trucks

Open Question

Reset tire pressure warning light ferrari 458

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: 2006 mini cooper low tire pressure light on

Hold down the reset for a few seconds until the light goes out. If this does not work, repeat.

Posted on Jan 14, 2009

Ad
cadman000
  • 607 Answers

SOURCE: Tire pressure warning on

possibly a faulty tire pressure sensor in one of the 4 tires

Posted on Apr 04, 2009

  • 112 Answers

SOURCE: how do i reset the tire pressure warning on a 2008 kia spectra

Your tire pressure is monitored by a device known as a TPMS sensor.

Tire Pressure Monitoring System is an integral part of your tire that tends to wear with age.

You need to take your vehicle to a reliable shop (I recommend Discount Tire) to have the TPMS sensor in the defective tire replaced. It's simple, and inexpensive.

I have used Discount Tire's services for almost 20 years, and have never been disappointed with their service.

Posted on Apr 11, 2009

pingman37
  • 58 Answers

SOURCE: Tire pressure light is on

You cannot reset them,Make sure that you check the pressures in the tires. The Infiniti Tire Pressure Monitoring System is designed to trip the warning light anytime the pressure in any of the tires drops below 29 psi. At 29 psi it really won't look like the tires are low. You could have one tire at 29 or 28 causing the light to stay on all the time. Check your pressures, set at 34 or 35 to be safe, or whatever pressure the tire is recommended to be. Not all infiniti vehicles with TPMS have the display that shows the pressure in each tire. If the pressures are above 29 psi, Then there could be an issue with one or more of the sensors. If you have the tires replaced you will have to have the sensors relearned at the dealer. Tire rotations do not require the same. 

Posted on May 08, 2009

  • 1 Answer

SOURCE: How do you reset a low tire pressure warning on a 2008 Jetta?

Reset the tire pressure warning, same as you would any service issue. Insert key in ignition, hold wrench button and min button, then start engine.

Posted on Jun 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Where is the battery located on a ferrari 458


if you can find the battery and know the correct procedure for attaching the jumper leads then there will be no problems

Dec 28, 2014 | Ferrari Cars & Trucks

1 Answer

Can i change ferrari 458 battery on my own and do i need any resetting?


Hi there, make sure you have a battery minder hooked up or you will lose the radio amongst other things possible.

Dec 28, 2014 | Ferrari Cars & Trucks

1 Answer

Tyre Pressure and ABS


By operating the tire pressure warning system reset switch, tire pressure warning system ECU can be set to issue a warning at an inflation pressure that corresponds with the type of tires.
Operate the tire pressure warning system reset switch only after the inflation pressures of all 4 tires have been adjusted on the vehicle.
To initialize the system, press and hold the tire pressure warning system reset switch for 3 seconds or longer with the power switch turned IG-ON. When starting the initialization, the tire pressure warning light blinks 3 times at 0.5 Hz.
During the initialization, the tire pressure warning system valve & transmitter measures the inflation
pressure of the tires, and registers the signals that are transmitted into the ECU at a frequency of 1 per
minute. The initialization process is completed when the signals from the tires have been received.
Once the tire pressure warning system reset switch has been pressed, do not turn the Ignition switch OFF for a few minutes.

Mar 05, 2014 | 2002 Toyota Corolla

1 Answer

I changed 1 of my valve sensor so i need to no how to reset the tpms light


By operating the tire pressure warning reset switch, the tire pressure warning ECU can be set to issue a warning at an inflation pressure that corresponds to the standard pressure of tires .Therefore, you must set the warning threshold to the proper value in order to comply with the local regulations .Operate the tire pressure warning reset switch only after the inflation pressures of all tires have been adjusted on the vehicle.To initialize the system, press and hold the tire pres- sure warning reset switch for 3 seconds or longer with the ignition switch in the ON position. When the system receives the
initialization signal, the warning light blinks 3 times (1 second on, 1 second off). During initialization, the tire pressure warning valve and transmitter measures the inflation pres sure of the tire, and registers the signals that are transmitted into the tire pressure warning ECU at a frequency of once per minute. The initialization process is completed when signals from all the tires have been received. It takes a few minutes .

Tire size Inflation Front Inflation Rear
P 195/65 R15 89S 30 psi 30 psi
195/65 R15 91H

P 205 /55 R16 89H 32 32 psi
P 215/45 R17 87W
205/55 R16 91V

Dec 10, 2013 | 2010 Toyota Corolla 2.0

1 Answer

Tyre pressure warning light showing when pressures are correct


Hi, the tire pressure monitor detects any changes in the tire inflation pressure. Therefore, it must initialize and store it in its memory if the tires or wheels have been replaced, re-inflated or the tires have been rotated. You can re-initialize the system by following these steps:

1. Check and make sure that your tires are inflated to the correct pressure

2. Turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (in the glove box) until the warning light turns off and then release the switch.

3. Now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. Initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

May 13, 2011 | Renault 18I Cars & Trucks

1 Answer

How to reset Ferrari F430 tire pressure warning light


Did you spend all you money on the car and now can't afford a mechanic?

May 07, 2011 | 2006 Ferrari F430

1 Answer

Reset the Tire Pressure Warning light.


well it depends, if you have just reset the tire pressures, the light should go off by itself, if it doesn't then you have a bad tire pressure sensor. If you have replaced the sensor, it must be programmed into the WCM by the dealership.

Nov 21, 2009 | Dodge Durango Cars & Trucks

1 Answer

Changed right front tire now reads zero on dash light is on


Your tire pressure monitor needs to be reset whenever you change or rotate your tires...

1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 24, 2009 | 2008 Chevrolet Tahoe

1 Answer

How do you reset low tire light


1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 20, 2009 | 2005 Chrysler PT Cruiser

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

451 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ferrari Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

911 Answers

yadayada
yadayada

Level 3 Expert

77169 Answers

Are you a Ferrari Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...