Question about Cars & Trucks

1 Answer

Clutch pedal Hi. I have a 2006 1.2 Dynamic fiat panda. I have two problems with the car. The power steering makes a funny sound whenever I turn and most recently when I press the clutch in it gets stuck and doesn't come back up. Your help will be much appreciated. Thank you.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 15,557 Answers

Check the fluids in both those places. The power steering and the clutch are both hydraulic.

Posted on Nov 25, 2013

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 62 Answers

SOURCE: i have a 2006 Kia

Could be a problem with the key lock itself or the steering wheel locking mechanism. Hard to determine without disassembling the steering collumn.

Posted on Aug 05, 2008

  • 4 Answers

SOURCE: 04 Mazda Tribute--Power Steering problem

check belt could be slipping glazed over could have air in system
check belt tensioner belt too lose may need new pump

Posted on Sep 06, 2009

rtpflh
  • 546 Answers

SOURCE: whirring noise every time the gas pedal is pressed

check the level of the power steering fluid,check belt tension & condition

Posted on Sep 23, 2009

stargazer406
  • 2 Answers

SOURCE: Fiat Palio-1.2 ELX (Petrol) clutch ''not-working''

Even I had this problem. After sometime engaging gear was difficult. There are two reasons. First, it could be leakage of servo fuel/brake fluid from the master cylinder on the clutch side or it could be due to the wear of the pressure plate.

Posted on Apr 27, 2010

daney_ricky
  • 1 Answer

SOURCE: My 2004 stick shift Saturn Ion has a problem

that rod stays in there when fixing the pedal you probably need a new clutch master cylinder now

Posted on Mar 04, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Steering heavy on fiat panda comes n goes what could be wrong


is it worse when moving slowly and better when fast ? check the drive belt to the power steering pump for tightness and condition, power stering fluid level, if all these are ok then would presume the pump needs renewing

Jun 08, 2017 | Fiat Cars & Trucks

1 Answer

How do i check level and drain if required the auto transmission fluid on a 2006 fiat panda dynamic as a warning light on dash states clutch overheating?


on most transmissions the fill plug is a square hole or a allen type located on the side of the transmission case about halfway, that is where you check and fill the transmission, and to drain it the plug is on the bottom of the transmission case.

Nov 18, 2016 | Fiat Cars & Trucks

1 Answer

Fiat panda clutch pedal sometime stay down!


Make sure that hydrolic fluid level is at full

Sep 13, 2016 | Fiat Panda Cars & Trucks

1 Answer

Wheel change on a Fiat panda


Great car i saw it on top gear lol. To change a tire, you will need a car jack, lug wrench, and a spare tire. Just put the lug wrench on the bolts and spin away. Make sure that you undo the bolts in a "x" pattern.

Jul 29, 2016 | 2006 Fiat Panda 1.2

1 Answer

Funny sound from the gear when in motion


If it's a high pitched whining noise it's will more than likely be the bearing in clutch assembly. When your drivin push clutch pedal down if noise disappears then will be bearing in clutch. If a automatic it might be a wheel bearing.

Jun 09, 2015 | Fiat Punto Cars & Trucks

1 Answer

Beeping sound when removing key from the ignition


Check with FIAT service centre but I suspect that it is the immobiliser and alarm arming themselves after the key has been removed and the noise is to let you know that the process is happening

Feb 09, 2014 | Cars & Trucks

1 Answer

Hi got fiat stilo jtd 02 plate clutch pedal has no resistance just goes to the floor could it be the cable or somethingelse please help


Hi, I've got the same problem. They run on brake fluid not cable. I started to bleed the
Clutch to adjust the bite point but after one bleed the pedal went to the floor and can't get it back. Tried pressure bleeding it but seems to be no fluid coming out of the bleed nipple. No leaks. Can any one help??

May 21, 2011 | 2006 Fiat 124

1 Answer

Just had a service panda dynamic the battery lead was loose tightened it now every time i start the car the clock resets to zerq any ideas as to what it could be?


sounds like a direct power feed from the battery has been left off. its a small lead that provides a constant feed to the parts of the car that needs to stay live when keys out,

Jan 03, 2010 | 2006 Fiat X1/9

1 Answer

Trouble removing the engine cover from Fiat panda 2006 diesel


i guess you got a chip then, look at the cover ithink 3 or 4, circles, fine screw driver and pop em out to see the 10mm nuts.

Aug 15, 2009 | 2006 Fiat 124

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...