Question about Chrysler Cars & Trucks
Transmission won't shift
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Could be a bad oil pressure switch, or a bad oil pump. Both will cause this issue. Hope it is the switch b/c the oil pump is a costly repair.
Posted on Mar 26, 2009
SOURCE: Code PO740 and PO700 show
Best to have a transmission place work on this.
Here are the meaning of the codes:
P0700 Transmission Control System Malfunction
P0740 Torque Converter Clutch Circuit Malfunction
It maybe cheap to fix like a bad sensor. Or it maybe something serious going on. Best to have a transmission shop check it out.
Posted on Apr 15, 2009
you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.
Posted on Apr 28, 2009
SOURCE: 08 Chrysler Sebring Transmission
I assume that you have to press the brake pedal in order to shift from park (ie:safety switch) you might first check to see if you have brake lights as they should be on the same circut and operated by the same switch. If the lights dont work, check the fuses could be a simple fix. Hope this helps
Posted on Jun 25, 2009
there is a spring on the left side of the shifter which has probably broken off it a common problem with a no cost fix as long you can find the spring. the spring attachs to the black case of the shifter and the other end goes to a pink plastic pivot to the interlock. drill a small hole in the pink upper pivot to reattach the spring. your spring would have shot off toward the back of the car inside the console check at the carpet's edge.the spring has a green protective band and is about an inch long ---to get the console out 4-- 10mm bolts at rear inside the back console compartment and 2--10mm bolts behind the a/c controls. the a/c control bezel and the upper bezel do not have screws but push in place--top bezel pulls straight out while the lower has to be pulled down and out to remove
Posted on Aug 10, 2009
Tips for a great answer:
Dec 04, 2014 | 2002 Chrysler Sebring
Sep 01, 2014 | 2002 Chrysler Concorde
Nov 25, 2013 | 2002 Chrysler Sebring
Oct 13, 2013 | 1999 Chrysler 300M
Jun 28, 2012 | 2002 Chrysler Sebring
Sep 06, 2010 | Chrysler Town & Country Cars & Trucks
Nov 15, 2017 | Chrysler Cars & Trucks
40 people viewed this question
Usually answered in minutes!