Question about Cars & Trucks

1 Answer

Vauxhall vxr exhaust manifold torque settings

Just about to fit a new turbo and exhaust manifold to my Astra vxr on a 57 plate but I can't find the torque settings anywhere

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Night Owl:

    An expert who has answered 10 or more questions between 12 midnight and 6am on the same day.

  • Expert
  • 54 Answers

German specs man gernan specs, u took the old one off so you know how tight they were gooden tite lol

Posted on Nov 25, 2013

  • Eliecer Amaya
    Eliecer Amaya Dec 03, 2013

    the difference is i know what youre talking about as well as the plate and all these ansers is not what youre looking for because its probably an after market thing these answers do not help you didnt ask for torque on the exuahst manifold to the engine etc or leak issues u asked for the torque on the plate for the turbo just putting my two cents in but glad to see all the help for your threads

  • Eliecer Amaya
    Eliecer Amaya Dec 03, 2013

    oh lol im new at this just realised all these other suggestions are for other threads

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 25 Answers

SOURCE: 87 samurai bolt torque specs for engine

The haynes book is not recommended since there are numerous mistakes and they still will not update. One of the biggest is the firing order.

The factory service manual is the only way to go.

Head bolts - 46 - 50.5 lbs (there is an order sequence for the bolts)

Intake & exhuast manifolds- 13.5 - 20 lbs

Flywheel - 41.5 - 47 lbs

Clutch cover - 13.5 - 20 lbs

Posted on Mar 17, 2009

CaptainKeyz
  • 202 Answers

SOURCE: low pressure exhaust sensor faulty on passat 57

If you have low pressure in the exhaust manifold, then there would an exhuast leak somewhere from the exhaust manifold to the tail pipe. These leaks tend to get bigger over driving time. It may be the exhaust manifold gasket, or a crack in the manifold. Give a good listen for a sputtering sound. Part of the exhaust pipes have to be removed for access to the manifold. A good spray of PB breaker will help a lot with the bolts here.
Escaping gas is bad for the environment. This also causes gas to enter the manifold and make its way to the valves. The temperature of the incoming air is very cold compared to the combustion chamber and can cause damage the your valves by stressing them.
If you find no leak, then you may consider the sensor may be faulty or the leak is very small.
Good Luck.

Posted on Mar 04, 2010

arauzvictor1
  • 466 Answers

SOURCE: need head bolt, intake manifold, and exhaust torque specs

Cylinder Head Bolt Step1- (25 FT.Lbs) Step2(45 Ft.Lbs) Step3(65Ft,Lbs).....Intake Manifold(35Ft Lbs)....Exhaust Manifold Center (20Ft Lbs) All Others (20 Ftlbs).....Thanks

Posted on Mar 06, 2010

  • 1 Answer

SOURCE: my car wont start, 1997 vauxhall astra 1.7 turbo diesel

IVE JUST PUT A NEW IGNITION ON MY 1996 VAUXHALL ASTRA DIESEL VAN,NOW WHEN I TURN THE IGNITIN IT STARTS AND THEN CUTS STRAIGHT OUT. HOW DO I CURE THIS?

Posted on Apr 07, 2010

  • 878 Answers

SOURCE: My exhaust manifold has cracked

check your local junk yards can do nothing but replace

Posted on Jan 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace the heated oxygen sensor on a Vauxhall astra


Which one? There are two. Number one is located in the exhaust manifold and is visible when you open the bonnet. Number 2 is screwed into the exhaust pipe under the car, just behind the engine block. For both you need a special tool readily available from - say - Halfords, eBay or Amazon. In both cases you unplug the sensor at its connector, then unscrew it. Replacement procedure just reverses this process.

Jun 12, 2016 | Vauxhall Cars & Trucks

1 Answer

What are the torque settings and sequence for a Meriva B 1.4 turbo


What components are you trying to fit? My advice would be to buy a good workshop manual and go from there Vauxhall Opel Meriva Petrol Diesel 03 May 10 03 to 10

Jan 15, 2016 | Vauxhall Cars & Trucks

1 Answer

What the torque settling on a 1.8spi vauxhall cavalier 1994


Cylinder head Renew bolts: Yes Tighten: 25 Nm Tighten: 90° Tighten: 90° Tighten: 90° Other engine tightening torques Main bearings Renew bolts/nuts: Yes Main bearings Stage 1: 50 Nm Main bearings Stage 2: 45°-60° Big end bearings Renew bolts/nuts: Yes Big end bearings Stage 1: 35 Nm Big end bearings Stage 2: 45°-60° Oil pump to cylinder block : 6 Nm Sump bolts : 15 Nm Sump drain bolt : 55 Nm Flywheel/driveplate :
  • Use new bolts and tighten as follows:
      • 1,4/1,6 = 35 Nm + 30° + 15°
      • 1,8/2,0 = 65 Nm + 30° + 15°
  • "Pot"-type flywheel = 65 Nm + 30° + 15°
  • Tighten drive plate to 60 Nm.
Clutch pressure plate : 15 Nm Crankshaft pulley/damper centre bolt : Use new bolts. Tighten centre bolt to 130 Nm + 40°-50°
Camshaft sprocket/gear : 45 Nm Camshaft/rocker cover : 8 Nm Inlet manifold to cylinder head : 22 Nm Exhaust manifold to cylinder head : 22 Nm Spark plugs : 25 Nm Lambda sensor (Oxygen) : 30 Nm Chassis tightening torques Front hub :
  • Tighten nut in three stages:
    1. 130 Nm
    2. Slacken off
    3. 20 Nm + 80°-90°.
Steering track rod end : New nuts 60 Nm Brake disc to hub Front: 4 Nm Brake caliper to carrier Front: 30 Nm Brake caliper/carrier to hub Front: 95 Nm Brake caliper/carrier to hub Rear: 80 Nm New bolts ABS sensor Front: 8 Nm ABS sensor Rear: 15 Nm Road wheels : 110 Nm
There you go pretty much covers everything hope that helps

Jan 11, 2015 | Vauxhall Cars & Trucks

1 Answer

Vauxhall astra auot code P1895 what does it mean


P1895 Engine control module (ECM), actual torque signal - circuit malfunctio

Sell this motor quick ,these are nice cars but suffer for these problems because the computer is bolted to the inlet manifold and gets too hot then cooks ,all these petrol engines from around this time suffer from this fault

Dec 17, 2013 | 1997 Chevrolet Lumina

1 Answer

Where is fuse box?


the main fuse box is in engine bay on the passenger side and its right becides the battery and there is another small fuse box in the boot on the nearside in the quarter panel

Jan 10, 2013 | Vauxhall Cars & Trucks

1 Answer

2000 Mazda Drifter 2.5 Turbo Diesel, exhaust manifold torque settings for nuts.


Mazda B2200, B2500 and B2600 (6th Generation).

In model year 1998, Mazda B series renews its own international markets. Production at the plant AutoAlliance Thailand began in May 1998. This model is also sold as the Ford Ranger in Europe and Asia, and the Ford Courier in Australia and New Zealand. Production started this year in the factories of companies AutoAlliance Thailand and Ford Motor Philippines. Versions CKD are also assembled in South Africa, Ecuador and Colombia.

The van is sold in over 130 countries under a variety of names. Along with the emblems of Fighter and Ranger in Southeast Asia (except Singapore, which served as the flagship models Proceed Japan), was sold as the Mazda Bounty and Ford Courier in New Zealand, Mazda Bravo in Australia, and Mazda Drifter in South Africa.

Engine options:
2.2 L 2.2 L (2.184 cc) 85 hp (63 kW)
2.5 L (1.998 cc) turbo diesel 118 hp (88 kW)
2.6 L (2.606 cc) 121 hp (90 kW)


zjlimited_1152.jpg

Fig. Tighten the exhaust manifold bolts in 2 stages

To install:

  1. Clean the mating surfaces on the exhaust manifold and the cylinder head.
  2. Install a new gasket and the exhaust manifold. Torque the bolts in sequence as follows:
    1. 16 ft. lbs. (23 Nm).
    2. 59 ft. lbs. (80 Nm).

Hope helps.

May 01, 2011 | Mazda B2600 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

168 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...