Question about 2002 Toyota Sequoia
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The most common cause is something inside the glove box jammed in the latch. Push glove box door release , and GENTLY insert a flat putty knife, plastic knife, or similar type tool in the groove of door, GENTLY try to pry open the door. U will probably (hopefully) find a napkin, map, or glove (does anybody actually put gloves in the glove box?) jammed in the inside latch. Let me know how u make out.
Posted on Nov 02, 2008
It's the power lock solenoid. There is a tiny plastic piece that connects the solenoid (motor) to the door lock mechanism (thin metal rod or two). Likely, the plastic piece has become disengaged. This is by design so that if there is a problem with the mechanism the motor does not burn out. You will need to have the interior door panel removed to gain access to the interior of the door and the lock rod and solenoid need to be reconnected. The plastic clips used to go for $1-$2 when I worked in auto parts.
Posted on Jan 13, 2009
Your power door locke solenoid is seized. You will need to replace it. You are going to have to get the entire door panel off, and then reach in to manually pull the solenoid arm to retract the lock mechanism. Then the door will open.
Posted on Mar 06, 2009
if you use a phillips screwdriver and put it in the gap where the latch on the hatch holds onto the anchor plate, while pulling down on the screw driver, press or pull the door release. this should release the latch.
Hope this is of some help.
Posted on Apr 20, 2009
Tips for a great answer:
Jul 19, 2014 | 2007 Toyota RAV4
Apr 14, 2014 | 2006 Toyota Prius
Mar 04, 2013 | 2007 Toyota FJ Cruiser
Rear Door dis-assembly diagram for Toyota car?
How to test Power door locks? http://repairhelpcenter.blogspot.in/2012/02/how-to-test-power-door-locks.html
right side slide door light switch on Toyota Sienna? http://repairhelpcenter.blogspot.com/2012/01/details-for-replacing-right-side-slide.html
Door locks not working? http://technoanswers.blogspot.com/2012/01/door-locks-not-working-on-ford-explorer.html
Power door locks not working? http://schematicsdiagram.blogspot.com/2011/12/power-door-locks-not-working.html
Repairing car Door lock Actuator?
How to Access car door panel?
Vehicle door panel components?
This will help.
Jul 17, 2012 | 2004 Toyota Sienna
To start, the noun "''rear latch switch'' is incorrect. It's actually called "Slide Door Lock". It's located on page BO-20 of the Toyota Repair Manual for the 2001 Sienna. There are two door locks on one sliding door. One in the front and one in the rear. Obviously, you want the one in the rear. The location for the "Slide Door Lock" (which also contains an electric switch) is in the rear of the sliding door located mid way up door. You can see (sliding door opened from the back) it without dissembling the door. And, the lock is made up of plastic (dirty white in color).
Mar 06, 2010 | 2001 Toyota Sienna
Dec 02, 2009 | 1989 Toyota Camry
Oct 12, 2009 | 2000 Saturn SC
Sep 21, 2009 | 1995 Toyota Camry
Jun 24, 2017 | 2002 Toyota Sequoia
263 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: