Question about Ford Cars & Trucks

Open Question

How To Remove Starter form 1980 Ford Pinto - Ford Cars & Trucks

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 6982 Answers

SOURCE: I need to remove the

If I remember correctly, the bottom part of the seat is on a hook (one on each side under the seat) To remove it, you push the bottom edge of the seat back and up is one motion. If you use a flashlight, you can slightly lift the seat and look underneath to actually get a look at the hooks.
Once the bottom has been removed, usually there are two bolts that hold the back on and possibly another hook at the top that you need to lift up on the back to disengage.
If I'm wrong, the hooks will be bolts and the bolts just need to be removed.(you will see that if you look)

Posted on Mar 19, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque spec for a 1978 Ford pinto differential pinion nut?


170 ft.lbs is the minimum; be aware that this differential uses a crush sleeve to set the backlash and the pinion torque is what crushes the crush sleeve. If you don't set the backlash correctly you can grind up your differential gears.
8 Inch Ford Rear End Torque Specifications eHow

Feb 02, 2015 | Ford Cars & Trucks

1 Answer

1980 ford f-250-5.8L-80k miles-replaced battery, starter, starter solenoid, ran great for week or two, now when I start it, engine turns over and runs, but occasionally starter sticks, and just won't turn...


Remove the small wire from the solenoid and hook up the battery. If the starter engages the solenoid is stuck. If the solenoid does not engage the starter with the small wire removed, check the small wire for a short to power.

Sep 03, 2013 | Ford Cars & Trucks

1 Answer

How to remove a starter from a 1980 honda accord


remove the positive battery terminal, then you have two bolts to remove the starter honda's are all metric so if you use a 9/16 tool you will strip the nuts,

Sep 21, 2012 | Cars & Trucks

2 Answers

What is the ignition point gap for a 71 ford pinto 2.3


Put it at .45 mm dwell angle should be between 48 to 52 degrees.

Dec 05, 2010 | Ford Granada Cars & Trucks

1 Answer

Have a kit car with a ford 2.0 ltr pinto sohc,rev counter wiring


Most rev counters of this type wire the positive wire to the contact points on the distributer and the black (negative) to ground.

Apr 16, 2010 | 1978 Ford Granada

3 Answers

Does my 1987 ford bronco 2 auto,4x4 have a timing


Belt, remove the the front plastic cover which covers the Timing Belt to see if the belt is stripped of teeth, same as the old Ford Pinto motor.. remove dist cap and watch rotor rotation, see if it is spinning... Ignition Modules are a major issue with those in that year also... check module also...

Sep 27, 2009 | 1987 Ford Bronco II

1 Answer

My 2005 aveo horn does not work I replaced the fuse and still not working


see if the horn will sound as you turn the steering wheel hard in both directions. a lot of time there are this connecting rings in the steering whell that make connection with the horn operation. these rings get worn just by driving even when you haven't used the horn. I hope this is not the cause because it can be costly. many times the fix is to replace the wheel. I had a toyota once and also the ole' pinto that had thses symptoms. both cars had the same cause. the toyota had to have another steering wheel. I can't remember what I did with the pinto. ( I do remember a funny story with the pinto, I lived in an apartment complex and one night at about 2a.m. the horn started blowing, I waited for a while then got mad at who ever is keeping me up I stormed outside and behold it was my ford pinto. I think I remember destroying the center of the wheel to get the horn to stop.)))) hope this helps.

Jun 11, 2009 | 2005 Chevrolet Aveo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...