Question about Honda Accord
A non electric door wont open lock works handle wont open the door what can I do to fix it
A non electric door, (which?) wont open,lock works ok, handle wont open the door.
What can I do to fix it.
well telling the door to us would help, and options.
so no electric locks,
there are 2 levers. one inside and one outside.
so you pull the door card (inside door covering)
and look at both locks , the inside pull, its it working?
then look at the key lock cylinder. is it connected still
and last are both connected to the latch mechanism.
one can cycle this latch lever inside the door shell.
if that fails the latch is busted.
all this is covered in the FSM ,why not read it.? (under body)
free , too.
Posted on Nov 25, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
one bolt holds handle on you should be able to see thru panel opening with flashlight, also haynes manuel has removal procedure. sold at most auto parts stores.
Posted on May 08, 2009
according to my partsman (who has had great advice for many years), you do not have to remove the door panel to replace the door handle which contains the cylinder lock. the handle is released with a screw which you can see when you open the door. you will need a starhead screwdriver or socket. A new handle costs around $40 at a parts store in my area. call around for a locksmith who will re-key your key to the new lock or use the key which comes with the new lock, your choice. i am in dealing with this also
Posted on Jun 07, 2009
go to a junk yard to get the part... it'll be $50 to $100 at a dealership, plus about $200 for labour charges...
It isn't that difficult of a job.
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Pull back the weather seal and you'll be able to see the outer door handle, it should be held in place by two bolts, one on either side of the handle...
roughly 30-60mins to fix
Posted on Sep 08, 2009
Tips for a great answer:
Jan 05, 2016 | 2001 Ford Explorer
Jan 15, 2011 | 1998 Ford Explorer
Oct 09, 2009 | 1995 Pontiac Grand Prix
Oct 05, 2009 | 1998 Acura CL
Aug 14, 2009 | 2000 Ford F350 Super Duty Super Cab
Jun 07, 2009 | 1999 Honda Accord
Jan 02, 2009 | 1998 Volkswagen Jetta
Dec 16, 2008 | 1998 Chevrolet K1500
Aug 03, 2008 | 2000 Honda Accord
164 people viewed this question
Usually answered in minutes!