Question about 1995 Chevrolet K1500

1 Answer

What is the torque specifications on a 1995 chevy cheyenne 1500. looking for the torque specs on the bolts going from the transmisison to the bell housing.

Posted by on

  • brinkdamien May 08, 2009

    Im looking for the torque for what would be considered the "tail-shaft" I am guessing. There are 9 (nine) bolts that go into the bell housing assembly that were taken out that need to be put back in and the manual doesnt have the specs for it in there. thanks for the transmission to the engine suggestion though, I will most definately keep that into consideration while im banging my knuckles on the body on the truck.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

Transmission to engine is 32ft lbs but is normaly tighten alot tighter you can't screw this up tighten really tight

Posted on May 08, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can i use a transmission from a 1996 chevy 1500 4x4 in a 1995 chevy 1500 4x4


there is a distinct possibility that it will drop in ,no problems
carefully check bell housing bolt locations
unless there is a major chassis change then it is a go

Oct 19, 2015 | Cars & Trucks

1 Answer

I need the torque specs for a 96 grand cherakee 4.0 motor


Hello, different size, grade, thread size, application will always have something to do the torque specification of bots, nuts, plug etc.


Remember, to get the proper torque specification on bolts, nuts and threaded holes. If these have been used on an engine and it being repaired/overhauled. To get the proper torque spec these items will be need to cleaned inside and out, threads on bolts need to be straightened, and the same for nuts and bolt holes in the engine block, head, timing cover----all bolts, nuts, threaded casting holes all need to be rework to presence condition... Almost new in shape. Now, once this is done you can get the proper torque requirement and to get these spec. all bolts, nuts, threaded holes need to be oiled first. They the torque can be set properly as to the manufactures specifications. Also, there are not set standards for torquing head bolts on a 265 cu/in Chevy and compared to a Ford 265 cu/in engine, they will be totally different.



If you don't the torque spec. go to your local library they have many American Auto Maintenance Manual that will give the all the information that you need. So, just remember all bolts, nuts, machined holes with thread need to cleaned and resized the threads. To torque any bolt will need to oiled--not much.... I hope this helps you and I wish lot of luck. GB...stewbison

Sep 24, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

1995 chevy p/u with 4.3 engine 1500 series.


code 12 is always present in gm motor products. it simply means no tach signal because engine is not running. i would go with the simple first and clean the throttle body real good . that takes care of 99% of idle problems.

May 04, 2010 | 1999 Chevrolet K1500

1 Answer

Torque specs for 1995 chevy 1500


Pinion seal nut. GMC Axle 270 Ft Lbs. Dana Axle 255 Ft Lbs.

Mar 16, 2010 | 1995 Chevrolet K1500

1 Answer

What are the torque specs for intake and head for a 1992 c 1500 chevy silverado. I need to know the torque specs for intake and head for my engine


For 1988-1995 4.3L,5.0L and 5.7L intake manifold bolts are torqued to 35ft.lbs.Start with center bolts on each side moving out finishing with the bolts in the front of the motor and the back

Oct 24, 2009 | 1992 Chevrolet C1500

1 Answer

Torque specs for 2000 chevy silverado truck 4.3 v-6 engine


Not sure what torque spec's your looking for.
Go to www.AutoZone.com, enter your vehicle information and check specifications. You should be able to look up the torque spec's your looking for.
Good luck.
Regards,

May 02, 2009 | 2000 Chevrolet Silverado 1500

2 Answers

Torque specs


the center bolt for cv axle!103ft-lbs,hub bearing assembly bolts!77ft-lbs

Apr 26, 2009 | Chevrolet Blazer Cars & Trucks

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
1995 Chevrolet K1500 Logo

455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...