Question about Cars & Trucks

1 Answer

How to remove a differential toyota dyna - Cars & Trucks

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.


    An expert that got 20 achievements.


    An expert that got 10 achievements.

  • Cars & Trucks Master
  • 44,629 Answers

Remove the drive shaft at the diff centre. Remove wheels and rear axles. Drain oil from diff . undo bolts around diff centre and pull forward and out . You may need to break the hold of the gasket so use a chisel and hammer at the joint.. Remember the diff may look small but it will be quite heavy so watch the fingers and hands

Posted on Nov 25, 2013


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What could be the problem for my exhaust brakes from stopping to work on my toyota dyna 1995?

The reason that exhaust brakes on trucks don't work is that the lever for the flap in the manifold is rusted and stuck. It may be that the cylinder that activates the lever is not serviceable or that it is not getting air/vacuum/power to work. Check the switch at the accelerator and the switch in the dash/steering column is operational

Jun 08, 2014 | 2007 Toyota Dyna

1 Answer

My toyota dyna keeps flashing an es warning light on the dashboard

toyota dyna es light flashing on dash. its the switch located by the drivers right knee if you have a right hand drive truck or maybe left knee for a left hand drive truck. the switch is marked es and usually has a fast and slow toggle. remove it with a flat head and unplug to see if that helps. if it helped then clean internals of switch and reinstall. this is usually a problem because some one has left the window down and rain water has gotten into the switch.

Jan 10, 2014 | Cars & Trucks

2 Answers

How to remove differential

the front differential is starting to make a silight gridging sound

Jan 02, 2014 | 1994 Toyota Land Cruiser

1 Answer

I have changed 4WD Actuator on my 2007 Toyota 4Runner. Now the Central Differential Lock isn't coming off when pushing(but don't know if before it was working). I push to Unlock the Differential but i

Put back on H2 or all normal, remove both battery cables from the battery, without touching the battery, hold the positive and the negative cables together for 30 seconds, then return the cables to the proper posts on the battery. This will drain all memory at the ECU, the next 10 or so miles , under normal driving will re- teach the computer. I hope this improves the issue!

Dec 03, 2013 | 2007 Toyota 4Runner

1 Answer

Changing seals onfront diferentil half axles on 97 chavy astro

Its a long procedure.

Go through the related help links,similar to your issue:---
Click the link below:---
How to remove Front differential?

Timing Belt, Cover, Sprockets, & Seal replacing ?

Crankshaft Front Seal?

Rear Main Seal Leaking?

Differential Chatters?

4x4 front differential will not engage the axle?

CV AXLE stuck in Transmission?

These will help.For more help,keep updated.Thanks.

Nov 06, 2012 | Cars & Trucks

1 Answer

Toyota dyna oil light reset

After changing the oil and filter on a 2008 Dyna, the "oil change" light would not turn off. On the plastic dash screen, there is a small circular rubber plug just above the rev counter. This plug can be prised off. Prise off the plug, insert a pin and press the button. Oil change light turns off.

Jul 14, 2012 | Toyota Cars & Trucks

1 Answer

I have a 91 toyota previa and im trying to remove the rear differential..its a 2wd. I have unbolted the drive axle and the differential casing but its my understanding you have to pull lose the rear...

Most differentials are set up like this. There is a steel bar that is i the middle of the gears, this is held in with a bolt. remove the bolt. pull the bar out. Then push the axles in the center. There is a c clip to remove from the axle. They will come out easily. Pull the axles out. Once the axles are out the hog head as they call it, will come out. Just watch as the inner gears will come out also. And will have to be placed in the same spot. Kinda of push in and see. let me know

Aug 16, 2011 | 1991 Toyota Previa

1 Answer

How do i remove and replace a stub axle on a toyota dyna with drum brakes

remove wheel and brakes, Pull diff cover and remove axel clips and replace

Jun 09, 2010 | 1999 Toyota Land Cruiser

2 Answers

How to remove rear pinion oil seal on front differential on toyota hilux 1985

remove the front driveshaft, remove nut on yoke, remove yoke, remove seal, put together in reverse order, add oil till full

Feb 08, 2010 | 1985 Toyota 4Runner

2 Answers

Compatability of different year differentials for 1991 toyota p.u

most vehicle recylers will help if you call them

Jan 05, 2009 | 1991 Toyota Pickup

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides