Question about 1998 Dodge Caravan

2 Answers

Trying to find location of camshaft position sensor on 98 dodge caravan.

Posted by on

  • robertscurti May 08, 2009

    i am not sure trying to help a friend, i wanna say it is a v6. someone told him it is on the bottom of the engine and external.

  • Curt Downs May 11, 2010

    Which engine do you have?



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Dodge Master
  • 1,779 Answers

There is a 3.0, 3.3, and a 3.8 V-6 engine available for that year, I know the 3.3 and 3.8 are very similar, I have a 3.3, it's located between the fuel rail and the thermostat housing. Disconnect elec. connector, one bolt holds it in place, you can access it with a socket and extension through the serpentine belt, and through a hole in a mounting bracket . O ring on sensor may result in some resistance when trying to pull sensor out after removing mounting bolt. Good luck, Curt

Posted on May 08, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 41 Answers


Posted on May 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Im trying to find the camshaft position sensor on a 2011 dodge grand caravan where is it located?

It's located underneath the intake exhaust manifold , the best way to do this is to get under the front of the engine then look underneath the manifold ps can be tricky and small hands are best for this good luck colin

Jun 30, 2017 | Dodge Grand Caravan Cars & Trucks

1 Answer

Locate the camshaft position sensor on a 2007 dodge caravan

On a 3.3 or 3.8, it is located on the rear of cylinder head near the back of engine.

Nov 05, 2014 | 2007 Dodge Caravan

1 Answer

98 caravan 2.4 0340error code

P0340 DODGE - Camshaft Position Sensor Circuit Bank 1 Sensor 1

Possible causes- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery Tech notes Sometimes and in some models, low battery voltage or a weak starter can can trigger a Camshaft Position Sensor code, also a loose worn cam belt can cause this code. Has the belt ever been replaced?.

Oct 10, 2012 | Dodge Caravan Cars & Trucks

2 Answers

Want to locate where is the crankshaft sensor on 2005 dodge grand carvan 3.3 eng

Hello brscwb,

Below is an image depicting the location of the crank sensor.

I hope this helps.




Aug 02, 2011 | Dodge Caravan Cars & Trucks

2 Answers

Codep0016 what does it mean?

P0016 Chrysler

Crankshaft -camshaft timing misalignment bank 1 sensor 1
- The pcm detects that the camshaft position is out of phase with the crankshaft position

Probable Cause[s]

  1. Engine oil dirty or contaminated /Incorrect engine viscosity
  2. Open or short circuit condition
  3. Camshaft 1/1 position solenoid, camshaft phaser ,camshaft1/1 position sensor
  4. Crankshaft position sensor ,crankshaft,tone wheel or flex plate
  5. Camshaft,tone wheel or pulse ring

Mar 13, 2011 | 2006 Dodge Caravan

1 Answer

My van is showing these three engine codes 343 434 355 dodge caravan 1993

camshaft position sensor high input, camshaft position position sensor intermittent, ignition coil circuit. Check your circuits to these locations. also check for cracks and breaks.

Dec 09, 2010 | 1993 Dodge Caravan

1 Answer

1998 Caravan: where is the crank sensor located on the 98 carava...

The crank sensor is located on the top side of the transmission about 11:oo clock position

May 18, 2010 | 1998 Dodge Caravan

1 Answer

Camshaft position sensor. Where is it located?

on a 3.0liter engine the cam shaft position sensor is located in the distributor. and the 3.3/3.8 are located in the intake manifold next to the thermostat.

Apr 01, 2010 | 1996 Dodge Caravan

1 Answer

I pulled codes from a dodge grand carvan the code is p0016 crankshaft sensor b1 sa1 replaced and replaced camshalf sensor also still did not fix the problem what other part should i look at

Hello! The DTC P0016 inidicates a cranskshaft and camshaft misalignment. If you only replaced the camshaft position sensor - you may need to replace the crankshaft position sensor - which is located at the top where the engine and transmission connect.

Hope this helps and good luck! Thanks for using FixYa!

Oct 16, 2009 | 2005 Dodge Grand Caravan

1 Answer

Where is the camshaft position censor on a 3 liter v6?

The camshaft position sensor is located under the hood in the center rear engine area, mounted on the rear center of cylinder head on the 3.0L Caravan. Hope this helped and best wishes.

Aug 06, 2009 | 1996 Dodge Caravan

Not finding what you are looking for?
1998 Dodge Caravan Logo

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides