Question about 2007 Toyota Sienna
My toyota sienna beeps when in gear, reverse, drive, but stops when I put it in park.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If the engine stalls abruptly on your Cirrus, as if some one clamped
it, then I would suspect that the 'lock-up' function on the torque
converter of the transmission is in the lock-up position. That means it
is the same as popping the clutch on a conventional transmission car,
which cause the same stall. If you can't drive the car, I would call
around to several independent transmission shops to find one that is
familiar with the Chrysler 41TE transmission and that appears to be
honest. Ask if they have a diagnostic readout box to communicate with
the transmission control computer. If they do then have the car towed
there and let them try a readout. If they get a code 38 or 0740
(depending upon what year model you have there) then that would show
that the lock-up is the problem. If you are lucky the problem will be
with a solenoid switch or valve in the box on the side of the
transmission which can be corrected easily without removing the
transmission. Because this possibility (along with about 6 other
causes) is worth pursuing, I would want a shop that is not going to
talk you into a "rebuild" without first looking into all the possible
reasons for the lock-up condition so you aren't "taken for a ride".
So ask friends if they know a good honest shop and check them out as to how well they understand the Chrysler transmission. You may end up at a Chrysler dealer, but insist on their trying all the other possible causes before authorizing removal of the transmission which is a very expensive repair and may not be necessary.
Posted on Jun 29, 2008
Check to see if your brake lights work(brake/ignition interlock), if they don't then the fuse that has blown may be the cause of the other warning lights in the dash, sure sound like they did something at the oil change place
Posted on Aug 22, 2008
SOURCE: car won't go in reverse
If the vehcile is V6,then the trans model is the A540E,and if it is the 4 cylinder engine,the trans model is an A140E.Both are 4 speed overdrive transmissions,and sorry to report that on just abot every automatic trans on the road,reverse gear failure is almost always a mechanical problem inside the transmission because there are no shift solenoids involved with reverse as with forward gears.And you did say the forward gears were fine.Good luck.
Posted on Sep 01, 2008
are you sure it is first gear it is making when in 1. In park does the car lock up if you try to push it with the handbrake off. If not your problem is adjustment of the cable i.e. although the lever is in reverse the gearbox isn't.
Posted on Dec 12, 2008
Tips for a great answer:
Jan 12, 2015 | 2004 Toyota Sienna
Nov 10, 2014 | 2004 Toyota Sienna
Sep 29, 2014 | 2000 Toyota Sienna
Nov 04, 2011 | 1997 Toyota Corolla
Jun 20, 2011 | 2002 Toyota Sienna
Jan 12, 2010 | 2005 Toyota Corolla
Sep 03, 2009 | 1998 Toyota Sienna
May 16, 2009 | 1995 Toyota Previa
78 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: